Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Graft copolymerisation of acrylamide onto cashew gum

The synthesis of cashew gum-g-polyacrylamide was carried out at 60 °C by a radical polymerisation using potassium persulphate as the redox initiator under N₂ atmosphere. A series of graft copolymers, varying in acrylamide concentration and keeping the concentration of the initiator and polysaccharide constant, was prepared. These graft copolymers were characterised by elemental analysis, infrared and ¹³C NMR spectroscopy, rheological studies, differential scanning calorimetry and thermogravimetric analysis. Comparisons amongst grafting parameters of the reaction of various natural polysaccharides with polyacrylamide (PAM) were carried out. High percentages of acrylamide conversion (%C) and grafting efficiency (%E) were obtained for cashew gum (CG), even with a low acrylamide/gum ratio. All copolymers had intrinsic viscosity and thus the hydrodynamic volume much higher than the CG value and closer to the PAM. The CG-g-PAM solution had an absolute viscosity at 2.5% concentration (wt./vol.) up to 33 and 3.3 times the CG and PAM values, respectively. Grafting of PAM chains onto the polysaccharide enhances its thermal stability.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (Grosses Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.01 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriamine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. Of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that >100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content).     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

The effects of solvation in the theoretical spectra of cationic dyes

We present a quantum-mechanical study on the solvent effects in the structure and electronic spectra of some cationic dyes: acridine orange, proflavine, safranine, neutral red, thionine and methylene blue. The geometry optimizations were carried out with the AM1 and DFT (with B3LYP functional) methods and the theoretical spectra of the dyes under study were obtained with Zindo time-dependent methods (TD–DFT and TD–HF). The solvation methodology adopted was the integral equation formulation (IEF) version of the polarizable continuum model (PCM).     

Stereochemical analysis of N-cyclohexylidene-N-(1-phenylethyl)amine derivatives

The configurational properties of a series of cyclohexylidene imines are discussed on the basis of their 1H, 13C and 15N NMR spectral data.     

Benzocoumarins from the rhizomes of Juncus acutus

Investigation of the ethyl acetate extract of Juncus acutus rhizomes revealed seven benzocoumarins, probably derived from oxidation of phenanthrenes already isolated from the plant. The structures were determined by means of spectroscopic methods. The anti-algal activity of the isolated compounds tested on the green alga Pseudokirchneriella subcapitata are reported here.     

Preconcentration of heavy metals ions from aqueous solutions by means of cellulose phosphate: an application in water analysis

Cellulose phosphate (CELLPHOS) was studied as a collector for analytical preconcentration of traces of Cd(II), Cr(III), Cu(II) and Ni(II) from aqueous sample solution. It has been proved that using chromatographic columns packed with CELLPHOS for preconcentration and 1.0 mol 1(-1) HCl for elution the adsorbed analytes are quantitatively enriched. An enrichment factor of 20 (100 ml sample, 5 ml concentrate) was achieved by this separation procedure, which was applied to a series of water analyses (river, sea, bog water).     

Atmospheric selenium in an industrialized area of Portugal

Summary Selenium is determined by instrumental neutron activation analysis (INAA), based on measurement of the long-lived ⁷⁵Se nuclide. In the urban and industrialized areas of Portugal selenium contents have been found of the order of of 0.5-1 ng/m³ in PM10 and PM2.5, according to the data collected since 1994. From November 12, 2001 and for not more than 3 months, the Se contents in PM10 and PM2.5 increased by a factor of 1000 in the northern area of Lisbon. More than other nutrients, selenium illustrates the dichotomy between essentiality and toxicity. There is no legislation on Se for ambient air and on indoor ambient point threshold limit values (US and Germany legislation), were 100 times higher than the abnormal values found that winter. The increase was also visible for mercury although not to such an extent. Attempts were made to understand the trend, going into a study of the emission sources located in the area using both INAA and PIXE. It was concluded that the observation occurred due to abnormal meteorological wind direction, which pushed the pollutants towards the populated area, when usually they flow into the Tagus estuary.