Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

Highly substituted azulene dyes as multifunctional NLO and electron-transfer compounds

Two highly substituted azulene derivatives were synthesised by Pd-mediated dimerisation from the corresponding tolan species. One azulene derivative (2) has donor functionalities (dianisylaminophenyl and dianisylamino) in the 1-, 2-, 3- and 6-positions, while the other (1) has donors (dianisylaminophenyl) in the 2- and 6-positions and acceptors (nitrophenyl) in the 1- and 3-positions. Each azulene derivative shows strong bond length alternation in the solid state, determined by X-ray crystal analysis, and an intense CT band around 450-500 nm in its UV/Vis spectrum. The first-order hyperpolarisability of 1 and of 2 was measured by hyper-Rayleigh scattering and is about that of disperse red DR1. Both azulene derivatives show multiple oxidation processes. The intramolecular adiabatic ET behaviour of the mixed valence radical cations of 1 and of 2 was investigated by UV/Vis/NIR spectroelectrochemistry. The intervalence-CT band of 1(+) could be analysed by the Generalised Mulliken-Hush theory, which yields an electronic coupling V=1140 cm(-1) for the optically induced adiabatic hole transfer.     

Hydroacridines XXV [1]. First Synthesis of (4aα,8aα,9aβ,10aβ)-Tetradecahydroacridine and New Syntheses of (4aα,8aα,9aα,10aβ)- and (4aα,8aβ,9aα,10aβ)-Tetradecahydroacridine

Summary. On heating in dry DMSO, in the presence of potassium t-butoxide, the N-nitrosamine of (4aα,8aβ,9aβ,10aα)-tetradecahydroacridine is completely converted into the N-nitrosamine of (4aα,8aα,9aα,10aβ)-tetradecahydroacridine. Under similar conditions, the N-nitrosamine of (4aα,8aα,9aβ,10aα)-tetradecahydroacridine yields a ternary equilibrium mixture containing itself (19%), and the N-nitrosamines of (4aα,8aβ,9aα,10aβ)-tetradecahydroacridine (46%) and the so far unknown (4aα,8aα,9aβ,10aβ)-tetradecahydroacridine (35%). The resulting N-nitrosamines can be smoothly denitrosated to the corresponding secondary amines.     

Evaluation of a dual electrospray ionization/atmospheric pressure chemical ionization source at low flow rates (∼50 µL/min) for the analysis of both highly and weakly polar compounds

The atmospheric pressure ionization (API) source for a commercial mass spectrometer was modified to operate as a dual source in both the electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) techniques by simultaneously utilizing the electrospray probe and the corona discharge needle. A switching box was designed to operate in either manual or programmable modes to permit rapid switching between ionization techniques without changing sources, probes, or breaking vacuum. The source can be operated using the following ionization techniques: ESI only, APCI only, ESI/APCI simultaneously, and ESI/APCI alternatingly. The optimum operating conditions for these ionization techniques were similar to the manufacturer’s original specifications except that the APCI flow rate was lower (～50 µL/min versus 1000 µL/min) and externally heated nebulizing gas was found to be desirable. A four-component mixture, introduced by flow injection, was used to demonstrate the versatility of the dual ESI/APCI source.     

Exact mass measurement of product ions for the structural confirmation and identification of unknown compounds using a quadrupole time-of-flight spectrometer: a simplified approach using combined tandem mass spectrometric functions

This article describes a simple method to perform lock mass corrected accurate mass measurements in tandem mass spectrometry (MS/MS) with a quadrupole time-of-flight (Q-TOF) mass spectrometer. The experimental approach consists of using the protonated molecule of a known compound, which is measured in a MS/MS function using low collision energy (no fragmentation), as mass calibrator. The unknown compound is acquired in MS/MS mode albeit using high collision energy. After the acquisition, the two MS/MS spectra of unknown and mass calibrator are combined, and the fragments of the unknown are lock mass corrected by using the protonated molecule of the mass calibrator. To prove this concept, 10 compounds were analyzed using this approach, the fragments interpreted and, where possible, related to structural data available in the literature. All the unequivocally assigned fragments were accurately mass measured with mass errors within appropriate limits, i.e. for m/z values <200 with a mass tolerance of 3 mDa while for m/z > 200 the mass tolerance is expressed as 10 ppm.     

Measurements in the separation region of a gas-particle cross flow

This paper reports the results from a study of the effects of particles on the boundary layer characteristics for cross flow over a single circular cylinder in the near separation region and on a cylinder located in the second row of a small mock-up heat exchanger array. Two size ranges of particles (45–85 m and 100–200 m) with two concentrations were used for the single cylinder tests. For the array, the larger particles were used at a single concentration. For the single cylinder, the results with the larger particles at mass loading ratio of 1.0 show an obvious effect on the velocity profile shape and on the rms levels. For reduced concentrations, and for the smaller particles, the effects are less noticeable. For the array, similar trends are observed and a delay in the separation point is reported.     

Sonic spray ionization applied to liquid chromatography/mass spectrometry analysis of endocrine-disrupting chemicals in environmental water samples

A sonic spray ionization liquid chromatography/mass spectrometry (LC/SSI-MS) procedure combined with off-line solid-phase extraction was optimized for the analysis of 20 endocrine-disrupting chemicals (EDCs) in water samples. Method development included a comparison of the novel sonic spray ionization (SSI) with more traditional ion sources, i.e. pneumatically assisted electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). It was demonstrated that SSI and ESI spectra were very similar, but were more prone to the formation of solvent cluster ions as compared with APCI spectra. This phenomenon was most prominent for SSI and resulted in an increased chemical background in full-scan mass spectra. However, this chemical noise did not affect the overall sensitivity of SSI and ESI. After optimization of LC and MS parameters, the LC/SSI-MS method was validated. Recoveries ranged from 76.3 up to 113.4% for all compounds. Limits of detection (LOD) and quantitation (LOQ) were established between 3.0 and 11.5 ng/L and 9.9 and 38.0 ng/L, respectively. Within-day (n = 5) and between-day (n = 5) reproducibility were investigated at three levels and ranged from 3.3-16.5% and 7.6-19.2%, respectively. Eight-point calibration curves were established and showed linearity for all compounds (r(2) > 0.987) over a linear dynamic range of 10-10 000 ng/L.     

Photodissociation channels for N2O near 130 nm studied by product imaging

The photodissociation of N(2)O at wavelengths near 130 nm has been investigated by velocity-mapped product imaging. In all, five dissociation channels have been detected, leading to the following products: O((1)S)+N(2)(X (1)Sigma), N((2)D)+NO(X (2)Pi), N((2)P)+NO(X (2)Pi), O((3)P) + N(2)(A (3)Sigma(+) (u)), and O((3)P) + N(2)(B (3)Pi(g)). The most significant channel is to the products O((1)S) + N(2)(X(1)Sigma), with strong vibrational excitation in the N(2). The O((3)P) + N(2)(A,B):N((2)D,(2)P) + NO branching ratio is measured to be 1.4 +/- 0.5, while the N(2)(A) + O((3)P(J)):N(2)(B) + O((3)P(J)) branching ratio is determined to be 0.84+/-0.09. The spin-orbit distributions for the O((3)P(J)), N((2)P(J)), and N((2)D(J)) products were also determined. The angular distributions of the products are in qualitative agreement with excitation to the N(2)O(D (1)Sigma(+)) state, with participation as well by the (3)Pi(v) state.     

Synthesis and biological evaluation of 5-substituted-4-nitroimidazole ribonucleosides

The imidazole nucleosides, 4(5)-bromo-5(4)-nitro-1-β-D-ribofuranosylimidazoles, have been prepared via glycosylation of the trimethylsilylated aglycone, 4(5)-bromo-5(4)-nitroimidazole, with tetra-O-acetyl-β-D-ribo-furanose followed by removal of the acetyl protecting groups. The 5-bromo-4-nitro-1-β-D-ribofuranosylimidazole nucleoside was acetonated to produce 5-bromo-4-nitro-1-(2,3-O-isopropylidene-β-D-ribofuranosyl)-imidazole which was cyclized to provide the corresponding anhydronucleoside 5,5′-anhydro-4-nitro-5-oxo-1-(2,3-O-isopropylidene-β-D-ribofuranosyl)imidazole. Sodium hydrosulfide treatment of 5-bromo-4-nitroimidazole nucleoside provided 5-mercapto-4-nitro-1-β-D-ribofuranosylimidazole 5-sodium salt which was alkylated with E-1,5-diiodopent-1-ene to yield 5-(E-1-iodo-1-penten-5-yl)thio-4-nitro-1-β-D-ribofuranosylimidazole. The corresponding iodine-125-labeled compound was prepared similarly using radiolabeled diiodopentene. The 5-bromo-4-nitroimidazole, 5-mercapto-4-nitroimidazole, and 5-iodopentenylthio-4-nitroimidazole nucleosides were cytotoxic to Molt-3 cells in vitro at concentrations higher than 10 μg/mL. The radiolabeled 5-iodopentenylthio-4-nitroimidazole nucleoside showed 2-fold higher uptake in a rapidly growing tumor as compared to uptake in a relatively slower growing tumor in mice.