Determination of ageing time of spirits in oak barrels using a headspace–mass spectrometry (HS-MS) electronic nose system and multivariate calibration

The aromatic composition of sugar cane spirits and, in general, of alcoholic beverages, is mainly influenced by the ageing process in wood barrels. There are several factors that affect the quality of the final aged product, but the time of the storage in the barrel is perhaps the most important one. Ageing time must therefore be controlled in order to detect counterfeits; however, this parameter is very difficult to control and, at present, there is no analytical method available to determine it. We propose a quantitative method for determining the ageing time of sugar cane spirits in oak barrels by using an electronic nose based on coupling directly a headspace sampler to a mass spectrometer (HS-MS), and multivariate calibration. The method developed is simple and provides, in 5 min, the ageing time of spirits with an accuracy of about 1 month.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Hydrogels in aqueous phases of polyvinylalcohol (PVA), surfactants and clay minerals

Aqueous solutions of synthetic clay minerals have been studied in the presence of surfactants and water-soluble polyvinylalcohol (PVA). The PVAs (PVA 1, PVA 2) had a molecular weight of about 10⁵ Dalton and a degree of hydrolysis of 82%. The PVA-samples were surface active and lowered the surface tension to 43 mN/m. As a consequence of their amphiphilic nature the PVA molecules bind strongly to clay mineral particles. On saturation the clay mineral particles adsorb the fivefold weight of PVA of their own weight. It is concluded that the thickness of the adsorbed layers on both sides of the clay mineral is in the range of the hydrodynamic diameter of the PVA-coils in the bulk phase.When the clay mineral particles are not saturated with PVA, they act as cross-linking agents for the PVA. The whole systems are physically cross-linked and assume gel-like properties. Rheological measurements show that samples behave like soft matter with a yield stress value. All of them have a frequency independent storage modulus which is an order of magnitude larger than the loss modulus. The hydrogels become stronger as PVA concentration increases.Small amounts of cationic surfactants bind on the clay mineral. The interface of the clay mineral becomes more hydrophobic and the binding of the PVA on the clay mineral is strengthened. With rising concentration of the surfactant the surfactant molecules bind on PVA and the PVA becomes hydrophilic. As a consequence the PVA can no longer bind on the clay mineral and the gels transform to viscous and turbid solutions. Small amounts of cationic surfactants therefore stiffen the hydrogels while larger amounts cause phase separation and a solution with low viscosity. Anionic surfactants like SDS do not bind on the clay mineral, but strongly on the PVA. With increasing SDS concentration, the hydrogels become stiffer at first but thereafter they break and transform to viscous fluids.In PVA-solutions without the clay minerals both cationic and anionic surfactants bind to the PVAs in the aqueous solution. With increasing concentration of surfactant, the viscosities of the solutions pass over a maximum. In this respect the PVAs behave like hydrophobically modified water soluble polymers. The surfactants bind to the hydrophobic microdomain and thereby crosslink the polymer molecules. On saturation the polyvinyl alcohol with anionic surfactant become hydrophilic and the network character disappears to a certain extent.     

Electrochemical dissolution of magnetite in acid solutions

The present paper deals with the electrochemical behavior of magnetite microcrystals in an acid medium. A voltammetric method employing a carbon-paste electroactive electrode (CPEE) with an organic binder was used. It was found that the cathodic voltammograms, which were recorded at different scan rates, formed a set bounded in the space of i–E parameters by a generalizing voltammetric curve corresponding to the effective potential scan rate _eff. In other words, all curves are situated under one enveloping curve, just as the smaller dolls sit in the largest doll of a Russian doll. Reverse currents (a cathodic current in the anodic direction of the potential scan) were observed on the cyclic voltammogram. Forward and reverse currents obey the same laws and have one and the same generalizing curve, which could be taken as the magnetite characteristic.     

Intramolecular charge transfer in pyrromethene laser dyes: photophysical behaviour of PM650.

Absorption and fluorescence (steady-state and time-correlated) techniques are used to study the photophysical characteristics of the pyrromethene 650 (PM650) dye. The presence of the cyano group at the 8 position considerably shifts the absorption and fluorescence bands to lower energies with respect to other related pyrromethene dyes; this is attributed to the strong electron-acceptor character of the cyano group, as is theoretically confirmed by quantum mechanical methods. The fluorescence properties of PM650 are intensively solvent-dependent. The fluorescence band is shifted to lower energies in polar/protic solutions, and the evolution of the corresponding wavelength with the solvent is analysed by a multicomponent linear regression. The fluorescence quantum yield and the lifetime strongly decrease in polar/protic solvents, which can be ascribed to an extra nonradiative deactivation, via an intramolecular charge-transfer state (ICT state), favoured in polar media.     

Regioselective N-vinylation of cyclic thionocarbamates through a vinyl bis-sulfone methodology

A vinyl bis-sulfone Michael type approach towards heteroatom vinylation was applied on nitrogen derivatives. Cyclic thionocarbamates--mainly 1,3-oxazolidine-2-thiones--were converted into their N-vinyl counterparts; the procedure proved particularly efficient in the case of carbohydrate-derived complex structures.     

Methodological modifications on quantification of phosphatidylethanol in blood from humans abusing alcohol,using high-performance liquid chromatography and evaporative light scattering detection

Background  

Phosphatidylethanol (PEth) is an abnormal phospholipid formed slowly in cell membranes by a transphosphatidylation reaction from phosphatidylcholine in the presence of ethanol and catalyzed by the enzyme phospholipase D. PEth in blood is a promising new marker of ethanol abuse depending on the high specificity and sensitivity of this marker. None of the biological markers used in clinical routine at the present time are sensitive and specific enough for the diagnosis of alcohol abuse.     

Novel 99mTc labeled σ receptor ligand as a potential tumor imaging agent

A novel ^99mTc labeled complex, [N-[2-((2-oxo-2-(4-(3-phenylpropyl)piperazin-1-yl)ethyl) (2-mercaptoethyl)amino)acetyl]-2-aminoethanethiolato]Technetium(V) oxide (PPPE-MAMA’-^99mTcO) ([ ^99m Tc]-2) has been designed and prepared based on the integrated approach. The corresponding rhenium complex (PPPE-MAMA’-ReO)(Re-2) has been prepared and characterized. In vitro competition binding assays show moderate affinity of Re-2 towards σ₁ and σ₂ receptors with K _i values of 8.67 ± 0.07 and 5.71 ± 1.88 μmol, respectively. Planar images obtained at 0.5 h, 4 h, 20 h after i.v. injection indicate the accumulation of [ ^99m Tc]-2 in MCF-7 human breast tumor bearing mice at 20 h. Furthermore, the accumulation of [ ^99m Tc]-2 has been inhibited at 20 h after co-injection of [ ^99m Tc]-2 plus haloperidol (1 mg/kg). Biodistribution studies of [ ^99m Tc]-2 display an in vivo tumor uptake of 0.14% ± 0.01% ID/g at 24 h post i.v. injection with a tumor/muscle ratio of 6.02 ± 0.87. The above results suggest that [ ^99m Tc]-2, derived from a previously published lead compound, retains certain tumor uptake and affinity for σ receptors. [ ^99m Tc]-2 may be used as a basis for further structural modifications to develop tumor imaging agents with high affinity for σ receptors.     

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

A new hydrogen peroxide biosensor was constructed, which consisted of a platinum electrode modified by a matrix of polyvinyl butyral (PVB) and nanometer-sized Ag colloid containing immobilized horseradish peroxidase (HRP), and using Co(bpy)₃³⁺ as mediator in the hydrogen peroxide solution. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The HRP immobilized on colloidal Ag was stable and retained its biological activity. The sensor displays excellent electrocatalytic response to the reduction of H₂O₂. Analytical parameters such as pH and temperature were also studied. Linear calibration for H₂O₂ was obtained in the range of 1×10^–5 to 1×10^–2 M under optimized conditions. The sensor was highly sensitive to H₂O₂, with a detection limit of 2×10^–6 M, and the sensor achieved 95% of steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability.