Ultrasound promoted synthesis of thioesters from 2-mercaptobenzoxa(thia)zoles

An ultrasound-enhanced method has been developed for the synthesis of a variety of thioesters from benzoyl chlorides and 2-mercaptobenzoxa(thia)zoles. Applying this methodology, 14 compounds were synthesized in excellent yields.     

Chemometric Strategies to Develop a Nanocomposite Electrode for Simultaneous Determination of Ascorbic Acid,Dopamine, and Uric Acid

A simple and sensitive method for simultaneously measuring dopamine (DA), ascorbic acid (AA), and uric acid (UA) using a poly(1‐aminoanthracene) and carbon nanotubes nanocomposite electrode is presented. The experimental parameters for composite film synthesis as well as the variables related to simultaneous determination of DA, AA, and UA were optimized at the same time using fractional factorial and Doehlert designs. The use of carbon nanotubes and poly(1‐aminoanthracene) in association with a cathodic pretreatment led to three well‐defined oxidation peaks at potentials around ?0.039, 0.180 and 0.351 V (vs. Ag/AgCl) for AA, DA, and UA, respectively. Using differential pulse voltammetry, calibration curves for AA, DA, and UA were obtained over the range of 0.16–3.12×10^?3 mol L^?1, 3.54–136×10^?6 mol L^?1, and 0.76–2.92×10^?3 mol L^?1, with detection limits of 3.95×10^?5 mol L^?1, 2.90×10^?7 mol L^?1, and 4.22×10^?5 mol L^?1, respectively. The proposed method was successfully applied to determine DA, AA, and UA in biological samples with good results.     

Assessment of dispersive liquid–liquid microextraction for the simultaneous extraction,preconcentration, and derivatization of Hg2+ and CH3Hg+ for further determination by GC–MS

This work reports the development of a dispersive liquid – liquid microextraction method for the simultaneous extraction, preconcentration, and derivatization of Hg²⁺ and CH₃Hg⁺ species from water samples for further determination by GC – MS. Some parameters of the proposed method, such as volume and type of disperser and extraction solvent, and Na[B(C₆H₅)₄] concentration were investigated using response surface methodology. Suitable recoveries were obtained using 80 μL C₂Cl₄ (as extraction solvent), 1000 μL ethanol (as disperser solvent), and 300 μL 2.1 mmol/L Na[B(C₆H₅)₄] (as derivatizing agent). Accuracy was evaluated in terms of recovery and ranged from 87 to 99% with RSD values <7%. In addition, a certified reference material of water (NIST 1641d) was analyzed and agreed with the certified value about 107% (for Hg²⁺), with RSD values <8.5%. LODs were 0.3 and 0.2 μg/L, with enrichment factors of 112 and 115 for Hg²⁺ and CH₃Hg⁺, respectively. The optimized method was applied for the determination of Hg²⁺ and CH₃Hg⁺ in tap, well, and lake water samples.     

Portable chemiluminescence multiplex biosensor for quantitative detection of three B19 DNA genotypes

A miniaturized multiplex biosensor exploiting a microfluidic oligonucleotide array and chemiluminescence (CL) lensless imaging detection has been developed for parvovirus B19 genotyping. The portable device consists of a reaction chip, comprising a glass slide arrayed with three B19 genotype-specific probes and coupled with a polydimethylsiloxane microfluidic layer, and a charge-coupled device camera modified for lensless CL imaging. Immobilized probes were used in DNA hybridization reactions with biotin-labeled targets, and then hybrids were measured by means of an avidin-horseradish peroxidase (HRP) conjugate and CL detection. All hybridization assay procedures have been optimized to be performed at room temperature through the microfluidic elements of the reaction chip, with sample and reagents delivery via capillary force exploiting adsorbent pads to drive fluids along the microchannels. The biosensor enabled multiplex detection of all B19 genotypes, with detectability down to 80 pmol?L^?1 for all B19 genotype oligonucleotides and 650 pmol?L^?1 for the amplified product of B19 genotype 1, which is comparable with that obtained in traditional PCR-ELISA formats and with notably shorter assay time (30 min vs. 2 h). The specificity of the assay has been evaluated by performing DNA–DNA hybridization reactions among sequences with different degrees of homology, and no cross hybridizations among B19 genotypes have been observed. The clinical applicability has been demonstrated by assaying amplified products obtained from B19 reference serum samples, with results completely consistent with the reference PCR-ELISA method. The next crucial step will be integration in the biosensor of a miniaturized PCR system for DNA amplification and for heat treatment of amplified products.

Molecule-based kinetic modeling by Monte Carlo methods for heavy petroleum conversion

A methodology for kinetic modeling of conversion processes is presented.The proposed approach allows to overcome the lack of molecular detail of the petroleum fractions and to simulate the reactions of the process by means of a two-step procedure.In the first step,a synthetic mixture of molecules representing the feedstock is generated via a molecular reconstruction method,termed SR-REM molecular reconstruction.In the second step,a kinetic Monte Carlo method,termed stochastic simulation algorithm(SSA),is used to simulate the effect of the conversion reactions on the mixture of molecules.The resulting methodology is applied to the Athabasca vacuum residue hydrocracking.An adequate molecular representation of the vacuum residue is obtained using the SR-REM algorithm.The reaction simulations present a good agreement with the laboratory data for Athabasca vacuum residue conversion.In addition,the proposed methodology provides the molecular detail of the vacuum residue conversion throughout the reactions simulations.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Acid-Catalyzed Diels-Alder Reactions of Cycloalkenones

Whereas the Diels-Alder reaction has been in vogue as a facile method of six-membered ring construction for many years, its application to a one-step cis-octalone synthesis was precluded by discouraging, early reports on the conditions required for the interaction of dienes with 2-cyclohexenones and on the yields of the resultant adducts.^1,2 It is quite conceivable that these observations were responsible in part for the minimization of use of an otherwise attractive route toward angularly alkylated six-membered polycycles in the field of steroid total synthesis. The discovery of Lewis acid catalysis of the cycloaddition of α, β-unsaturated carbonyl compounds³ has rekindled interest in the above reactions.⁴ The following discussion illustrates octalone     

Synthesis in Water and Antimicrobial Activity of 5-Trichloromethyl-4,5-dihydroisoxazoles

Two series of 5-trichloromethylisoxazoles were synthesized from the cyclocondensation of 1,1,1-trichloro-4-methoxy-3-alken-2-ones [Cl₃CC(O)C(R²) = C(R¹)OMe, where R¹ = H, Me, Et, Pr, iso-Pr, cyclo-Pr, Bu, terc-Bu, CH₂Br, CHBr₂, CH(Me)SMe, (CH₂)₂Ph, and Ph, and R² = H; R¹ = H and R² = Me and Et; R¹ and R² = -(CH₂)₄- and -(CH₂)₅-; and R¹ = Et and Ph and R² = Me] with hydroxylamine hydrochloride through a rapid one-pot reaction in water. The 5-trichloromethyl-4,5-dihydroisoxazoles were aromatized by reaction with concentrated sulfuric acid to obtain the respective 5-trichloromethylisoxazoles. Their structures were confirmed by elemental analysis, ¹H/¹³C nuclear magnetic resonance, and electron impact mass spectroscopy. Crystal structure analysis for 5-triclhoromethyl-5-hydroxy-3-propyl-4,5-dihydroisoxazole (2d) and 5-trichloromethyl-5-hydroxy-3,4-hexamethylene-4,5-dihydroisoxazole (2o) is presented. The antimicrobial activities of the 5-trichloromethyl-4,5-dihydroisoxazole derivatives were examined using the standard twofold dilution method against Gram-positive bacteria (Staphylococcus aureus), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), and yeasts (Candida spp. and Cryptococcus neoformans). All of the tested 5-trichloromethyldihydroisoxazoles exhibited antibacterial and antifungal activities at the tested concentrations.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Selective Sulfenylative Desulfonylation or Decarbalkoxylation of α-Sulfonyl Malonates with DABCO or Bu3N: Reactivity and Conformational Analysis

The study on reactivity of several α-substituted α-sulfonyl malonates toward 1,4-diazabicyclo[2.2.2]octane (DABCO) and Bu₃N is described. The reactivity with DABCO revealed the possible competition between decarbalkoxylation and unexpected desulfonylation, depending on the α-substituent, because of sterical hindrance around the electrophilic centers (SO₂ and CO₂R). The derivatives with crowded α-substituents suffer selective desulfonylation, and a novel and efficient desulfonylation method can be proposed. The dependence of the reactivity of α-sulfonyl malonates on the sterical hindrance around the electrophilic centers is confirmed by conformational analysis (Macromodel/MM2? and Mopac/MP3). The carbanionic mechanism is proved because the corresponding protonated, deuterated, and sulfenylated products were obtained by addition of the corresponding electrophilic agents. Bu₃N showed itself to be a novel selective decarbalkoxylation agent for any α-substituted α-sulfonyl malonate.