On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.     

One Spot Microwave Synthesis and Characterization of Nitrogen-Doped Carbon Dots with High Oxygen Content for Fluorometric Determination of Banned Sudan II Dye in Spice Samples

Journal of Fluorescence - A simple microwave-assisted synthesis of nitrogen-doped carbon dots with high oxygen content (O-N-CDs) was carried out with citric acid as a carbon source and...     

Direct and Fast Electrochemical Determination of Catechin in Tea Extracts using SWCNT‐Subphthalocyanine Hybrid Material

In this study, single walled carbon nanotubes (SWCNTs) were covalently functionalized by terminal ethynyl bearing subphthalocyanine (SubPc) to obtain a new hybrid material, viz. SWCNT‐SubPc (CS), via “click” reaction for the first time. The structural characterization and study of the electrochemical sensor properties of the CS hybrid material to catechin were carried out. A convenient and fast analytical method was offered for the determination of catechin. It was shown that the deposition of CS on the surface of a glassy carbon electrode (GCE) led to a 2.2 and 8‐fold increase in the differential pulse voltammetry (DPV) responses to catechin in Britton‐Robinson (BR) buffer solution (a pH of 3) in comparison with SWCNT‐modified and bare GCE, respectively. The dynamic range, detection and quantification limits of catechin were determined to be 0.1–1.5 μM, 13 nM and 43 nM, respectively. Selectivity of the suggested CS/GCE sensor was investigated on addition of a number of interfering metal ions, antioxidants and biomolecules. The applicability of the modified electrode for the detection of catechin in real tea samples such as green, rosehip fruit, Turkish and Indian black tea was demonstrated with the standard addition method. Along with the ease in fabrication and low prices, the proposed CS/GCE sensor was reproducible, selective, stable and sensitive to catechin in major types of tea samples.     

Identification of radical structures on 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5‐dimethylbenzimidazoliumsilver(I)bromide exposed to gamma rays: an EPR study

1‐Pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide and 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide and their Ag⁺ complexes were synthesized and their polycrystal forms were produced by recrystallization in dichloromethane/Et₂O solvent system. Structural determinations were carried out by ¹H NMR and ¹³C NMR with a Varian 400 NMR system using tetramethylsilane as internal standard and CDCl₃ as solvent. The disappearance of acidic N‐heterocyclic carbene proton showed the formation of Ag(I) complexes. Also, elemental analyses were carried out. Electron paramagnetic resonance (EPR) measurements were performed to determine the formed radical structure on the samples irradiated at the room temperature for 72 h by using ⁶⁰Co‐source with dose rate of 0.680 kGy. The EPR measurements were carried out in the temperature range of 200 K–450 K. Identical radicals were determined on the irradiated compounds. It was observed that the shapes of the spectra of the samples were independent of the temperature but, the resonance line intensities changed linearly with the temperature. Also, it was detected that the free radical on the 1‐pentamethylbenzyl‐3‐ethylimidazoliumsilver(I)bromide is not stable compared to that on the 1,3‐bis(pentamethylbenzyl)‐4,5dimethylbenzimidazoliumsilver(I)bromide. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and Antimicrobial Activities of Some 1-[(N,N-Disubstitutedthiocarbamoylthio)acetyl]-3,5-diaryl-2-pyrazolines

The increasing clinical importance of drug-resistant fungal and bacterial pathogens has lent additional urgency to microbiological research and new antimicrobial compound development. For this purpose, new pyrazoline derivatives were synthesized and evaluated for antimicrobial activity.

Some 1-[(N, N-disubstitutedthiocarbamoylthio)acetyl]-3,5-diaryl-2-pyrazolines derivatives were synthesized by reacting 1-(chloroacetyl)-3,5-diaryl-2-pyrazolines with appropriate potassium salts of secondary amine dithiocarbamic acids. The chemical structures of the compounds were elucidated by IR, ¹ H-NMR, and FAB⁺-MS spectral data. Their antimicrobial activities against Staphylococcus aureus (B-767), Escherichia coli (B-3704), Pseudomonas aeruginosa (ATCC 27853), Proteus vulgaris (NRLL B-123), and Candida albicans (NRRL-27077) were investigated. The results showed that some of the compounds have notable activity against S. aureus and C. albicans.     

Carrier‐Mediated Transport of Hg(II) through Bulk and Supported Liquid Membranes

The transport of Hg (II) ions from an aqueous solution into an aqueous receiving solution through bulk and supported liquid membranes containing a calix[4]arene derivative 1 as a carrier was examined. The kinetic parameters of bulk liquid membrane studies were analyzed assuming two consecutive, irreversible first‐order reactions. The influence of temperature, stirring rate, carrier concentration and solvent on the kinetic parameters (k₁, k₂, R_m ^max, t_max, J_d ^max, J_a ^max) has also been investigated. The membrane entrance rate, k₁, and the membrane exit rate, k₂, increased with increasing temperature and stirring rate. The activation energy values are calculated as 4.87 and 48.63 kj mol^?1 for extraction and reextraction, respectively. The values of calculated activation energy indicate that the process is diffusionally controlled by species. Also, the transport behavior of Hg²⁺ from aqueous solution through a flat‐sheet supported liquid membrane has been investigated by the use of calix[4]arene derivative 1 as carrier and Celgard 2500 as the solid support. A Danesi mass transfer model was used to calculate the permeability coefficients for each parameter studied. The highest values of permeability were obtained with 2‐nitrophenyloctyl‐ether (NPOE) solvent and the influence was found to be in the order of NPOE>chloroform>xylene.     

Synthesis and Comparison of Extraction Properties of p‐tert‐Butylcalix[n]arene Nitrile Derivatives for Selected Metals and Dichromate Anions

The article describes the syntheses and extraction properties of two p‐tert‐butylcalix[6]arene nitrile derivatives (3 and 4). The trinitrile derivative 3 has been synthesized from 5,11,17,23,29,35‐hexa‐tert‐butyl‐37,38,39,40,41,42‐hexahydroxycalix[6]arene 1. The compound 1 was directly converted to its hexanitrile derivative 4. In these syntheses, it was thought to explore the role of nitrile sites in the extraction of various metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions. The liquid‐liquid extraction properties of 3 and 4 towards selected alkali/transition metal cations and HCr₂O₇ ^?/Cr₂O₇ ^2? anions are reported. It has been observed that receptor 3 does not extract alkali/transition metal cations effectively, but shows affinity towards HCr₂O₇ ^?/Cr₂O₇ ^2? anions at low pH. The compound 4 is an effective form for transferring Ni²⁺ selectively, while it shows poor transferring ability for HCr₂O₇ ^?/Cr₂O₇ ^2? anions from an aqueous into a dichloromethane layer. It was observed that the cavity size of the calix[n]arenes and the cooperativity of the functionalities play important roles in two phase extraction systems.     

Metal ion complexation in acetonitrile by cone,di-ionised calix[4]arene-1,2-crown ethers with two pendant dansyl fluorophores

Four cone calix[4]arene-1,2-crown ethers each with two ionisable side arms containing dansyl groups are synthesised. The crown ether ring on the lower rim is varied from crown-4 to crown-5 with hydrogen or tert-butyl groups on the para position of the upper rim. Di(tetramethylammonium) salts of the di-ionised ligands are utilised for spectrofluorimetric titration experiments in MeCN. The influence of alkali metal, alkaline earth metal and selected transition and heavy metal (Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) cations on the spectroscopic properties of the two dansyl groups linked to the lower rim of the conformationally locked, di-ionised calix[4]arene-1,2-crown ether frameworks is investigated by emission spectrophotometry. All of the metal cations induce red shifts in the emission spectra of the di-ionised ligands. The metal cations produce enhancement or quenching of the fluorescence emissions. Changes in the fluorescence emission as a function of the metal cation identity, the lower rim crown ether ring size and the absence or presence of upper rim tert-butyl groups are investigated.     

Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Synthetic Access to New Pyridone Derivatives through the Alkylation Reactions of Hydroxypyridines with Epoxides

General methods for the preparation of a variety of pyridone and oxypyridine derivatives are described. 2‐,3‐,4‐Hydroxy pyridine and 2‐pyridinemethanol were alkylated with ethylene‐, propylene‐, and stryrene‐oxide and epichlorohydrin in the presence of different Lewis acids as a catalyst. The best yield of 3a was achieved in the presence of CdI₂/BF₃ · OEt₂. The corresponding pyridone derivatives (3a–d, 7a–d) were obtained from the reaction of 2‐and 4‐hydroxypyridine with oxiranes in good yields, whereas oxypyridine derivatives (5a–d, 9a,b) were obtained from reactions of 3‐hydroxypyridine and 2‐pyridinemethanol with oxiranes. Chlorohydrines (3d, 5d, 7d) were easily converted to corresponding epoxy derivatives (10, 11, 12) in basic medium; then amino alcohols (13–17) were obtained from the reaction of these epoxy derivatives with amines.