负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

Spectrothermal studies of 1,10-phenanthroline complexes of Co(II), NI(II), Cu(II) and Cd(II) orotates

The 1,10-phenanthroline (phen) complexes of Co(II), Ni(II), Cu(II) and Cd(II) orotates were synthesized and characterized by elemental analysis, magnetic susceptibility, spectral methods (UV-vis and FTIR) and thermal analysis techniques (TG, DTG and DTA). The Co(II), Ni(II), Cu(II) and Cd(II) ions in diaquabis(1,10-phenanthroline)metal(II) diorotate octahedral complexes [M(H₂O)₂(phen)₂](H₂Or)₂·nH₂O (M=Co(II), n=2.25; Ni(II), n=3; Cu(II) and Cd(II), n=2) are coordinated by two aqua ligands and two moles of phen molecules as chelating ligands through their two nitrogen atoms. The monoanionic orotate behaves as a counter ion in the complexes. On the basis of the first DTG_max, the thermal stability of the hydrated complexes follows the order: Cd(II), 68°C 68°C     

Self-assembly and characterization of paclitaxel-loaded N-octyl-O-sulfate chitosan micellar system

N-octyl-O-sulfate chitosan micellar system loaded paclitaxel was prepared by using dialysis method. The critical micelle concentration (CMC) of the modified chitosan was found to be 0.45 mg/ml. Compared with the amount of N-octyl-O-sulfate chitosan, the paclitaxel loading amount in the system was up to 25% (w/w), depending on both of the solvents used in dialysis and the feed weight ratio of paclitaxel to the derivative. The polymeric micelles forming and loading occurred simultaneously in the dialysis process when ethanol and water were utilized as the solvents for paclitaxel and the polymer, respectively. Paclitaxel-loaded micellar system of N-octyl-O-sulfate chitosan was characterized by DSC, WXRD and TEM. TEM photograph revealed that paclitaxel existed as the colloid particulates in ethanol before loading and in the cores of the spherical polymeric micelles after loading. The results of DSC and WXRD indicated that paclitaxel was transferred from the crystalline state to amorphous state after loading. The lyophilized powder of micellar system (25% (w/w) loading) could be reconstituted easily in aqueous media even after 2 months storage at 4 degrees C without the change of paclitaxel entrapment and micelle size. The reconstituted solution (2.1 mg paclitaxel/ml) also showed good stability. The dilution with saline may decrease the loading and physical stability based on the dilution times which was related with CMC of the polymer. In vitro tests showed that paclitaxel was slowly released from micellar solution and the release lasted up to 220 h by means of the dialysis method.     

New Copper（Ⅱ） and Nickel（Ⅱ） Complexes of 4-Morpholinoacetophenone Thiosemicarbazone： Structural, Electrochemical and Antimicrobial Studies

4-Morpholinoacetophenone thiosemicarbazone, MAPT, and its nickel（Ⅱ） and copper（Ⅱ） complexes have been prepared and characterized by elemental analysis, magnetic susceptibility, spectral methods （FT-IR, ^1H NMR） and cyclic voltammetry. Electrochemical behaviors of the complexes have been studied by cyclic voltammetry in DMF media showing metal centered reduction processes for both of them. The redox properties, nature of the electrode processes and the stability of the complexes were discussed. [Cu（MAPT）2]Cl2 complex shows Cu（Ⅱ）/Cu（Ⅰ） couple and quasi-reversible wave associated with the Cu（Ⅲ）/Cu（Ⅱ） process. The reduction/oxidation potential values depend on the structures of complexes. Also, the antimicrobial activities of these complexes were determined against S. aureus, E. coli and B. subtilis.     

Solvent extraction behaviour of iodine and bromine in aqueous-organic systems,analogy with radioactive decay

The extraction of iodine and bromine under various conditions from their saturated aqueous solutions by CCl₄, C₆H₆ and o-xylene has been studied. The data obtained from the experiments carried out at various temperatures, for H₂O(I₂)−CCl₄ and H₂O(I₂)−C₆H₆ systems, exhibit an Arrhenius behaviour. The overall activation energy calculated for the extraction in the H₂O(I₂)−CCl₄ system, 650±50 cal·mol⁻¹ is lower than that of H₂O(I₂)−C₆H₆, 3600±300 cal·mol⁻¹. The use of the solubility parameter for the interpretation of the data in the extraction of iodine is investigated. The data obtained in multiple extractions are treated by using the analogy between extraction and radioactive decay. The half number of extraction for each system is determined. The complex curves obtained in the H₂O(I₂)−CCl₄ and H₂O(I₂) −Br₂)−CCl₄ systems are resolved into two components.     

Single-site mutation and secondary structure stability: an isodesmic reaction approach. The case of unnatural amino acid mutagenesis Ala-->Lac

A method is described to evaluate backbone interactions in proteins via computational unnatural amino acid mutagenesis. Several N-acetyl polyalanyl amides (AcA(n)NH(2)) were optimized in the representative helical (3(10)-, 4(13)-, and a "hybrid" kappa-helix, n = 7, 9, 10, 14) and hairpin (two- and three-stranded antiparallel beta-sheets with type I turns betaalphaalphaepsilon, n = 6, 9, 10) conformations, and extended conformers of N-acetyl polyalanyl methylamides (n = 2, 3) were used to derive multistranded beta-sheet fragments. Subsequently, each residue of every model structure was substituted, one at a time, with l-lactic acid. The resulting mutant structures were again optimized, and group-transfer energies DeltaE(GT) were obtained as heats of the isodesmic reactions: AcA(n)NHR + AcOMe --> AcA(x)LacA(y)NHR + AcNHMe (R = H, CH(3)). These group-transfer energies correlate with the degree of charge polarization of the substituted peptide linkages as measured by the difference Deltae in H and O Mulliken populations in HN-C=O and with the H-bond distances in the "wild-type" structures. A good correlation obtains for the HF/3-21G and B3LYP/6-31G* group-transfer energies. The destabilization effects are interpreted in terms of loss of interstrand and intrastrand H-bonds, decrease in Lewis basicity of the C=O group, and O...O repulsion. On the basis of several comparisons of Ala --> Lac DeltaE(GT)'s with heats of the NH --> CH(2) substitutions, the latter contribution is estimated (B3LYP/6-31G*) to range between 1.5 and 2.4 kcal mol(-1), a figure close to the recent experimental DeltaDeltaG(o) value of 2.6 kcal mol(-1) (McComas, C. C.; Crowley, B. M.; Boger, D. L. J. Am.Chem. Soc. 2003, 125, 9314). The partitioning yields the following maximum values of the electronic association energy of H-bonds in the examined sample of model structures (B3LYP/6-31G* estimates): 3(10)-helix D(e) = -1.7 kcal mol(-1), alpha-helix D(e) = -3.8 kcal mol(-1), beta-sheet D(e) = -6.1 kcal mol(-1). The premise of experimental evaluations of the backbone-backbone H-bonding that Ala --> Lac substitution in proteins is isosteric (e.g., Koh, J. T.; Cornish, V. W.; Schultz, P. G. Biochemistry 1997, 36, 11314) is often but not always corroborated. Examination of the integrity of H-bonding pattern and phi(i), psi(i) distribution identified several mutants with significant distortions of the "wild-type" structure resulting inter alia from the transitions between i, i + 3 and i, i + 4 H-bonding in helices, observed previously in the crystallographic studies of depsipeptides (Ohyama, T.; Oku, H.; Hiroki, A.; Maekawa, Y.; Yoshida, M.; Katakai, R. Biopolymers 2000, 54, 375; Karle, I. L.; Das, C.; Balaram, P. Biopolymers 2001, 59, 276). Thus, the isodesmic reaction approach provides a simple way to gauge how conformation of the polypeptide chain and dimensions of the H-bonding network affect the strength of backbone-backbone C=O...HN bonds. The results indicate that the stabilization provided by such interactions increases on going from 3(10)-helix to alpha-helix to beta-sheet.     

Synthesis of persulfate containing poly (N-vinyl-2-pyrrolidone) (PVP) hydrogels in aqueous solutions by γ-induced radiation

The effect of ⁶⁰Co γ-irradiation on aqueous solutions of poly(N-vinyl-2-pyrrolidone) (PVP) in the presence of persulfate anion has been investigated. The gelation dose of PVP and persulfate containing PVP aqueous solutions has been determined. At low concentrations of persulfate (1.00–3.50%), gelation percentages exhibited a decreasing trend by increasing persulfate content in aqueous solutions of the polymer. The gelation doses of persulfate containing polymer solutions were calculated by the Charlesby–Pinner equation. It was observed that the gelation dose values were shifted to higher values by increasing persulfate concentration in solution. The ratio of the chain scission and crosslinking yields (G(s)/G(x)) was also determined. The results showed that the G(s)/G(x) ratios were smaller than one for PVP aqueous solution system, whereas those obtained for persulfate containing PVP aqueous solutions were higher than unity. The results implied that the chain scission of polymer is more effective than crosslinking in the presence of persulfate. Mechanism of the crosslinking and/or degradation and structure–property relationship of PVP and PVP/persulfate hydrogel systems were investigated by Fourier transformation infeared and thermal analysis (differential scanning calorimetry, thermal gravimetric analysis and differential thermai analysis) methods.     

Structure of starch-bentonite gels

Mixed gels of starch and bentonite are investigated in the interval 0.056–0.089 of total solids/water ratio and 0-100% starch in the solids. The bentonite was a sodium calcium bentonite with a Na/Ca ratio of 1.76. In water it forms gels consisting of a network of band-type structures. Starch forms gels through hydrogen bonds between granules and/or amylose and amylopectin present on the external surfaces of granules and/or in fully stretched form. Mixed gels of bentonite and starch were obtained by adding corn starch granules to the already formed bentonite gels and heating the mixture above the Kofler gelatinization temperature. Amylose and amylopectin were adsorbed on strands of band-type structures of mont-morillonite lamellae. Starch gellation, e.g. diffusion of amylose out of the granule, was facilitated in the presence of bentonite. On the other hand, the presence of starch favored delamination of the montmorillonite particle into thinner lamellae. Maximum gelatinization and polymer adsorption were observed for gels with 20% starch and 80% bentonite. Montmorillonite networks formed the continuous phase for 0-80% starch. At higher starch concentrations, montmorillonite flakes were dispersed within the polymer network. Increase in the water content of the gels caused segregation of the bentonite and starch.     

The use of solid sorbents for direct accumulation of organic compounds from water matrices–a review of solid-phase extraction techniques

The main principles of solid-phase extraction techniques are reviewed in this paper. Various solid sorbents can be used as a suitable trap for direct accumulation of organic compounds from aqueous solutions. The trapped analytes can be desorbed by elution with suitably chosen liquid phases. These preconcentration procedures can be considered as low performance liquid chromatography and the efficiency of the procedure can thus be related to the retention characteristics of the preconcentration column. The main sorbents used for trace enrichment purposes are also reviewed. Besides, the concise methodology, sample storage, and automation are discussed. The advantages of solid phase extraction as compared to liquid-liquid extraction are given as well as some drawbacks of this method.