Synthesis,characterization and pronounced epoxidation activity of cis-dioxo-molybdenum(VI) tridentate Schiff base complexes using tert-butyl hydroperoxide

The synthesis and catalytic performance of novel cis-dioxo-Mo(VI) complexes containing simple ONO tridentate Schiff base ligands in the epoxidation of various olefins using tert-butyl hydroperoxide in desired times with excellent chemo- and stereoselectivity have been described. The study of turnover numbers and the UV–Vis spectra of the Mo complexes in the present epoxidation system indicate well the high efficiency and stability of the catalysts during the reaction. The electron-deficient and bulky groups on the salicylidene ring of the ligand promote the effectiveness of the catalyst.     

Preparation and characterization of aqueous polyaniline battery using a modified polyaniline electrode

A rechargeable battery of the type Zn/ZnCl₂, NH₄Cl/polyaniline (PAn)-reticulated vitreous carbon was successfully prepared based on a PAn modified electrode. Voltage of the battery was 1.2 V. Charge-discharge behavior at a constant load of 2.5 k, recycle ability and the rate of self-discharge were measured. The results showed that the battery has a capacity of 121 mA h g⁻¹ polymer weight and coulombic efficiency was in the range between 75% and 100%. Self-discharge rate was less than 1% per day and the battery showed a good recycle ability. It was also found that even after 70 cycles, the decrease in the open-circuit voltage was less than 5%.     

Application of a quartz crystal nanobalance and principal component analysis for the detection and determination of histidine

The aim of the present investigation was to develop a biosensor based on a quartz crystal nanobalance (QCN) for the detection of histidine (His). A thin layer of nickel was electrochemically deposited over the gold crystal electrode and exposed to H₂O₂ to form nickel oxide. The composite electrode was then used to determine His. The frequency shifts were linear with respect to the concentration of His in solution. His can be measured in the range of 100–2000 mg L⁻¹. A lower limit of detection of 48 mg L⁻¹ and a sensitivity factor of 0.0307 Hz/mg L⁻¹ was obtained. Some possible interferences were checked for, and the performance of the sensor was found to be unaffected by any interference except for those from arginine, cysteine and NaH₂PO₄. Principal component analysis (PCA) was used to process the frequency response data of the single piezoelectric crystal at various times, considering the different adsorption–desorption dynamics of His and the interfering compounds. Over 85% of the variance in the data was explained by two principal components. A score plot of the data for the first two PCs showed that the modified QCN yields favorable identification and quantification performances for His and the interfering compounds.     

Mechanism for the degradation of erythromycin A and erythromycin A 2'-ethyl succinate in acidic aqueous solution

A major drawback of the antibiotic erythromycin A is its extreme acid sensitivity, leading to rapid inactivation in the stomach. The accepted model for degradation in aqueous acidic solution has erythromycin A in equilibrium with erythromycin A enol ether and degrading to anhydroerythromycin A. We report a detailed kinetic study of the acidic degradation of erythromycin A and of erythromycin A 2'-ethyl succinate (the market-leading pediatric prodrug), investigating the reaction rates and degradation products via NMR. This reveals that the accepted mechanism is incorrect and that both the enol ether and the anhydride are in equilibrium with the parent erythromycin. By implication, both the anhydride and enol ether are antibacterially inactive reservoirs for the parent erythromycin. The actual degradation pathway is the slow loss of cladinose from erythromycin A (or erythromycin A 2'-ethyl succinate), which is reported here for the first time in a kinetic study. The kinetic analysis is based on global, nonlinear, simultaneous least-squares fitting of time course concentrations for all species across multiple datasets to integrated rate expressions, to provide robust estimates of the rate constants.     

A novel tridentate Schiff base dioxo-molybdenum(VI) complex: Synthesis,crystal structure and catalytic performance in green oxidation of sulfides by urea hydrogen peroxide

A new dioxo-molybdenum(VI) complex [MoO₂(L)(CH₃OH)] has been synthesized, using 2-[(2-hydroxypropylimino)methyl]phenol as tridentate ONO donor Schiff base ligand (H₂L) and MoO₂(acac)₂. A monoclinic space group P2₁/c was determined by X-ray crystallography from single-crystal data of this complex. The high catalytic activity of this new Schiff base complex has been observed in the oxidation of various sulfides by urea hydrogen peroxide in ethanol affording sulfoxides and sulfones using different molar ratio of oxidant/sulfide in high/excellent yields and selectivity under mild and eco-friendly conditions. The relative high stability and desired turnover numbers have been observed for this Mo-catalyst in the oxidation reactions.     

Completeness results in probabilistic metric spaces

In this paper, we consider complete probabilistic metrizable (topological) space and prove that any G_δ set in a complete probabilistic metric spaces is a topologically complete probabilistic metrizable space.     

Electrically conductive epoxy‐based nanocomposite adhesives loaded with silver‐coated copper and silver‐coated reduced graphene oxide nanoparticles

In this research, a conductive adhesive based on epoxy resin as the polymer matrix and silver‐coated copper powder and silver‐coated reduced graphene oxide as conductive fillers was synthesized. Graphene oxide was synthesized by modified Hummer's method. It was reduced and modified by silver powder. Copper particles were coated with silver using the electroless plating method. Finally, conductive nanocomposite adhesives were prepared using conductive fillers with different weight fractions. The structural properties of fillers were identified by Fourier‐transform infrared (FTIR) and induced coupled plasma (ICP) analysis and the morphology of the samples by scanning electron microscopy (SEM). Finally, conductive properties, lap shear strength, and thermal stability of adhesive were evaluated. The conductive adhesive prepared with optimized properties have 70% weight percentage silver‐coated copper powder and 1% weight percentage silver‐coated reduced graphene oxide. The bulk resistivity of the optimum sample was 1.6 × 10^‐2 Ω.cm, and the lap shear strength was 7.10 MPa. Also, thermogravimetric analysis showed that the weight loss of adhesive decreased from 88.72% to 30.55% during heating, which showed the addition of fillers improves the thermal stability of adhesive.     

Simple and highly efficient synthesis of oxaziridines by tetrabutylammonium Oxone

Oxygenation of various aldimines with tetrabutylammonium monoperoxysulfate produced the corresponding E- or a mixture of E- and Z-oxaziridines with very high yields (?90%) and good to excellent selectivities (75-100%) within 20 min to 10 h in CH₃CN at room temperature (∼25 °C). The E/Z isomer ratio critically depends on the stereo-electronic nature of the substituents in the oxaziridines, solvent, and the presence of Lewis acids and bases.     

Optimal design and characterization of superparamagnetic iron oxide nanoparticles coated with polyvinyl alcohol for targeted delivery and imaging

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) measurements, vibrating-sample magnetometer (VSM), transmission electron microscopy (TEM), UV-visible, and Fourier transform infrared (FT-IR) spectrometer. PVA not only stabilized the colloid but also played a role in preventing further growth of SPION followed by the formation of large agglomerates by chemisorption on the surface of particles. A rich behavior in particle size, particle formation, and super paramagnetic properties is observed as a function of molarity and stirring conditions. The particle size and the magnetic properties as well as particle shape and aggregation (individual nanoparticles, magnetic beads, and magnetite colloidal nanocrystal clusters (CNCs) are found to be influenced by changes in the stirring rate and the base molarity. The formation of magnetic beads results in a decrease in the saturation magnetization, while CNCs lead to an increase in saturation magnetization. On the basis of the DOE methodology and the resulting 3-D response surfaces for particle size and magnetic properties, it is shown that optimum regions for stirring rate and molarity can be obtained to achieve coated SPION with desirable size, purity, magnetization, and shape.     

Economical Oxygenation of Olefins and Sulfides Catalyzed by New Molybdenum(VI) Tridentate Schiff Base Complexes: Synthesis and Crystal Structure

Abstract. New cis‐dioxomolybdenum(VI) complexes (MoO₂Y^xCH₃OH) were synthesized using MoO₂(acac)₂ and 2[(1‐hydroxy‐2‐methylpropane‐2‐ylimino)methyl]phenol derivatives as tridentate ONO donor Schiff base ligands (H₂Y^x). MoY¹ was crystallized in orthorhombic space group Pbca. The epoxidation of olefins using tert‐butyl hydroperoxide and oxidation of sulfides to the sulfoxides by hydrogen peroxide were efficiently enhanced by the catalytic activity of title Mo^VI complexes with excellent selectivity. The high efficiency and relative stability of the catalysts was observed by turnover number and UV/Vis investigations. The electron‐rich and bulky ligands promoted the effectiveness of the catalysts.