Zinc-zinc bonded zincocene structures. Synthesis and characterization of Zn2(eta5-C5Me5)2 and Zn2(eta5-C5Me4Et)2

While, in general, decamethylzincocene, Zn(C5Me5)2, and other zincocenes, Zn(C5Me4R)2 (R = H, But, SiMe3), react with dialkyl and diaryl derivatives, ZnR'2, to give the half-sandwich compounds (eta5-C5Me4R)ZnR', under certain conditions the reactions of Zn(C5Me5)2 with ZnEt2 or ZnPh2 produce unexpectedly the dizincocene Zn2(eta5-C5Me5)2 (1) in low yields, most likely as a result of the coupling of two (eta5-C5Me5)Zn* radicals. An improved, large scale (ca. 2 g) synthesis of 1 has been achieved by reduction of equimolar mixtures of Zn(C5Me5)2 and ZnCl2 with KH in tetrahydrofuran. The analogous reduction of Zn(C5Me4R)2 (R = H, SiMe3, But) yields only decomposition products, but the isotopically labeled dimetallocene 68Zn2(eta5-C5Me5)2 and the related compound Zn2(eta5-C5Me4Et)2 (2) have been obtained by this procedure. Compound 2 has lower thermal stability than 1, but it has been unequivocally characterized by low-temperature X-ray diffraction studies. As for 1 a combination of structural characterization techniques has provided unambiguous evidence for its formulation as the Zn-Zn bonded dimer Zn2(eta5-C5Me4Et)2, with a short Zn-Zn bond of 2.295(3) A indicative of a strong Zn-Zn bonding interaction. The electronic structure and the bonding properties of 1 and those of related dizincocenes Zn2(eta5-Cp')2 have been studied by DFT methods (B3LYP level), with computed bond distances and angles for dizincocene 1 very similar to the experimental values. The Zn-Zn bond is strong (ca. 62 kcal.mol-1 for 1) and resides in the HOMO-4, that has a contribution of Zn orbitals close to 60%, consisting mostly of the Zn 4s orbitals (more than 96%).     

Vibrational spectra of cyclopentadienylphosphine: infrared and theoretical studies from DFT anharmonic potentials

Both experimental and theoretical infrared investigations of cyclopentadienylphosphine (CpP) are reported. The infrared spectra (3500-500 cm(-1)) in the gas phase have been recorded at 0.5 cm(-1) resolution. Infrared absorptions bands of the two lowest stable conformers were observed and assigned. Average integrated intensities of isolated and overlapping vibrational bands were also determined experimentally. The vibrational frequencies of the CpP system and its P-dideuterated isotopologue have been calculated by means of density functional theory. The Becke exchange functional and Lee-Yang-Parr correlation functional method with a combination of the two basis sets, namely 6-31+G(d,p) and the correlation-consistent triple-zeta cc-pVTZ set of Dunning, were used. Hybrid B3LYP/B3LYP//cc-pVTZ/6-31+G(d,p) anharmonic frequencies of the fundamental, overtone, and combination transitions were calculated in the 3500-200 cm(-1) area with the use of a variational approach, implemented in the P_Anhar_v1.1 code, to assign the experimental data for each conformer.     

Monte Carlo simulation of thermal neutron flux of americium–beryllium source used in neutron activation analysis

The neutron activation analysis is a method of exclusively elemental analysis. Its implementation of irradiates the sample which can be analyzed by a high neutron flux, this method is widely used in developed countries with nuclear reactors or accelerators of particle. The purpose of this study is to develop a prototype to increase the neutron flux such as americium–beryllium and have the opportunity to produce radioisotopes. Americium–beryllium is a mobile source of neutron activity of 20 curie, and gives a thermal neutron flux of (1.8 ± 0.0007) × 10⁶ n/cm² s when using water as moderator, when using the paraffin, the thermal neutron flux increases to (2.2 ± 0.0008) × 10⁶ n/cm² s, in the case of adding two solid beryllium barriers, the distance between them is 24 cm, parallel and symmetrical about the source, the thermal flux is increased to (2.5 ± 0.0008) × 10⁶ n/cm² s and in the case of multi-source (6 sources), with-out barriers, increases to (1.17 ± 0.0008) × 10⁷ n/cm² s with a rate of increase equal to 4.3 and with the both barriers flux increased to (1.37 ± 0.0008) × 10⁷ n/cm² s.     

Modelisation and distribution of neutron flux in radium–beryllium source (<Superscript>226</Superscript>Ra–Be)

Using the Monte Carlo N-Particle code (MCNP-6), to analyze the thermal, epithermal and fast neutron fluxes, of 3 millicuries of radium–beryllium, for determine the qualitative and quantitative of many materials, using method of neutron activation analysis. Radium–beryllium source of neutron is established to practical work and research in nuclear field. The main objective of this work was to enable us harness the profile flux of radium–beryllium irradiation, this theoretical study permits to discuss the design of the optimal irradiation and performance for increased the facility research and education of nuclear physics.     

On the Structures,Lifetimes, and Infrared Spectra of Alkylmercury Hydrides

A series of six small alkylmercury hydrides of the general formula RHgH with R=methyl, ethyl, n‐propyl, isopropyl, n‐butyl, and 3‐butenyl were obtained by reduction in vacuo of the corresponding mercury halide with tributyltin hydride in the presence of a radical inhibitor. These very reactive compounds, which have to be removed from the reaction mixture as they are formed, were characterized by ¹H NMR and ¹³C NMR spectroscopy. The IR spectra of n‐propyl‐, isopropyl‐, n‐butyl‐, and 3‐butenylmercury hydride were recorded for the first time. All compounds were then studied by density functional theory calculations on the basis of a recent theoretical assessment for alkylmercury compounds performed by our group. Comparison of the experimental and theoretical results allowed the assignment of the vibrational modes in an unambiguous way, in spite of the low intrinsic stability of some of the derivatives investigated. The experimental procedure implemented for registering the IR spectra of these unstable species in the gas phase allowed us to obtain reasonable estimates of their lifetimes.     

Marine bacterial inhibitors from the sponge-derived fungus Aspergillus sp.

Chromatographic separation of a crude extract obtained from the fungus Aspergillus sp., isolated from the Mediterranean sponge Tethya aurantium, yielded a new tryptophan derived alkaloid, 3-((1-hydroxy-3-(2-methylbut-3-en-2-yl)-2-oxoindolin-3-yl)methyl)-1-methyl-3,4-dihydrobenzo[e][1,4]diazepine-2,5-dione (1), and a new meroterpenoid, austalide R (2), together with three known compounds (3–5). The structures of the new compounds were unambiguously elucidated on the basis of extensive one and two-dimensional NMR (¹H, ¹³C, COSY, HMBC, and ROESY) and mass spectral analysis. Interestingly, the compounds exhibited antibacterial activity when tested against a panel of marine bacteria, with 1 selectively inhibiting Vibrio species and 2 showing a broad spectrum of activity. In contrast, no significant activity was observed against terrestrial bacterial strains and the murine cancer cell line L5178Y.     

Structural revision and absolute configuration of lateritin

‘Lateritin’ (1), a morpholine-2,5-dione (depsipeptide), was reinvestigated for its structure and absolute configuration. On the basis of thorough 1D and 2D NMR and mass spectrometrical analyses, the structure of 1 was revised to be identical with beauvericin (8) and confirmed that beauvericin (8) is the trimeric lactone of ‘lateritin’ (1). The absolute configuration was determined by acidic hydrolysis, followed by application of Marfey’s method, menthyl ester derivatization, and GC–MS analysis. In addition, the specific optical rotation values of the hydrolysis products were compared with those of available standards.     

Multinuclear alkylaluminium macrocyclic Schiff base complexes: influence of procatalyst structure on the ring opening polymerisation of epsilon-caprolactone

Two remote dialkylaluminium centres supported by a macrocyclic Schiff base ligand exhibited beneficial cooperative effects, whilst aluminoxane-type bonding proved to be detrimental to activity for the ring opening polymerisation of epsilon-caprolactone.     

Emission spectroscopy from optically thick laboratory acetylene samples at high temperature

Recently, a high temperature source has been used to produce high temperature emission spectra of acetylene in the 3 μm spectral range, under Doppler limited resolution, and the complete spectral assignment has been performed using a global rovibrational Hamiltonian [Amyay B, Robert S, Herman M, Fayt A, Raghavendra B, Moudens A et al. Vibration-rotation pattern in acetylene (II): Introduction to Coriolis coupling in the global model and analysis of emission spectra of hot acetylene around 3 μm. J Chem Phys 2009;131:114301]. The present investigation focuses on the relative emission line intensities which are observed to be affected. The strongest lines intensity may be considerably reduced for high column density acetylene samples, hence affecting the 3:1 ortho:para intensity ratio. A radiative model is developed to take into account the effects generated by the strong opacity of the acetylene samples including self-absorption and absorption of the radiation emitted by the hot environment. The model is used to extract the absolute concentration of the high temperature acetylene samples from the observed relative spectral intensities. The relevance of the procedure for infrared remote sensing in high temperature astrophysical environments, such as circumstellar envelopes of cool carbon rich evolved stars, is discussed.