Remediation of copper ions from aqueous solution using hybrid magadiite: kinetics,isotherm and mechanism of removal

Research on Chemical Intermediates - This paper deals with the potential use of hybrid magadiite composite as an alternative adsorbent for the removal of copper ions. Na-magadiite was synthesized...     

Synthesis,characterization and study of methyl 3-(2-oxo-2H-1,4-benzoxazin-3-yl) propanoate as new corrosion inhibitor for carbon steel in 1M H2SO4 solution

Research on Chemical Intermediates - A new benzoxazin derivative, namely methyl 3-(2-oxo-2H-1,4-benzoxazin-3-yl) propanoate (1,4-MBXP), was synthesized under mild conditions from 2-aminophenols and...     

Electrochemical determination of Cd<Superscript>2+</Superscript> at a titanium electrode modified with a lead film by square wave anodic stripping voltammetry

The modified titanium electrode with lead film (PbTiE) was used for determination of trace levels of cadmium using square wave anodic stripping voltammetry (SWASV). The measurement of cadmium on the PbTiE has the best reply under the following conditions of PbTiE preparation: 10^–3 mol L^–1 Pb²⁺ in HCl (pH 1.0), deposition potential of–1.40 V vs. Ag/AgCl/KCl_sat and deposition time of 300 s. The PbTiE reveals highly linear behavior in the concentration range 5 × 10^–8 to 10^–6 mol L^–1, with a limit of detection of 2 × 10^–9 mol L^–1. Interference of nine ionic species was evaluated. The measurements were carried out without removing dissolved oxygen from the solution.     

Antifungal activities of amino acid ester functional pyrazolyl compounds against Fusarium oxysporum f.sp. albedinis and Saccharomyces cerevisiae yeast

Series of functional multidendate ligands based on pyrazole and amino acid derivatives were prepared in good and excellent yields (75–5%) by condensation of one equivalent of amino acid ester hydrochloride substrates with two equivalents of (3,5-dimethyl-1H–pyrazol-1-yl)methanol. These tridentate functionalized compounds and their starting materials were screened for their antifungal activities against Fusarium oxysporum f.sp. albedinis and the yeast of Saccharomyces cerevisiae. Considerable activities were recorded with respect to the two studied microorganisms.     

Phase behavior of polystyrene acrylonitril copolymer and polymethylmethacrylate blends under shear

Polymer blends undergo external stresses such as pressure and shear in course of processing cycles. The knowledge of their phase behavior at each step of these cycles is crucial for understanding their physical properties and eventually improves their performance in practical applications. The effects of shear on the phase diagram of binary polymer blends are considered. A theoretical formulism is used upon which the free energy is the sum of two terms. The first term is modeled with the Flory–Huggins free energy of mixing and describes the thermodynamic behavior of the system in the quiescent state. The second term represents the excess free energy stored during flow. In the presence of shear flow, the excess free energy is expressed in terms of the viscosity and the shear modulus. Both quantities depend on composition and shear rate. The curvature of the variation of viscosity versus composition has a tremendous impact upon the nature of phase separation. Phase diagrams are described by the spinodal curves and show for the case considered here miscibility enhancement with increasing shear rate. A good correlation is found with experimental data of the literature on blends of polystyrene acrylonitril copolymer and polymethylmethacrylate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Calibration transfer of near‐IR partial least squares property models of fuels using virtual standards

Partial least squares (PLS) models of 10 important jet and diesel fuel properties were built using spectra from a master near‐IR dispersive instrument and then subsequently transferred to a secondary dispersive instrument via a novel calibration transfer method using virtual standards and a slope‐bias correction. Implementation of the transfer requires that only seven spectra of neat solvents be acquired on the master and secondary instruments. The spectra of the neat solvents are then used to digitally replicate spectra from the calibration set to generate virtual standards. Comparison of PLS predictions for the master and secondary instrument virtual standards provides a simple but effective slope‐bias correction for transfer. The transferred fuel properties include American Petroleum Institute gravity, % aromatics, cetane index, flashpoint, hydrogen content, % saturates, and distillation temperatures at 10%, 20%, 50%, and 90% volume recovered. Transfer error was lower than using either the pure solvents with a slope‐bias correction or than using a piecewise direct standardization calibration transfer using fuel spectra. Transfer error was higher than when using actual fuels to transfer the calibration. The use of virtual standards eliminates the need to maintain either complex fuel standards or the master instrument for future instrument calibration transfers. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling NASDAQ Series by Sparse Multifractional Brownian Motion

The objective of this paper is to compare the performance of different estimators of Hurst index for multifractional Brownian motion (mBm), namely, Generalized Quadratic Variation (GQV) Estimator, Wavelet Estimator and Linear Regression GQV Estimator. Both estimators are used in the real financial dataset Nasdaq time series from 1971 to the 3rd quarter of 2009. Firstly, we review definitions, properties and statistical studies of fractional Brownian motion (fBm) and mBm. Secondly, a numerical artifact is observed: when we estimate the time varying Hurst index H(t) for an mBm, sampling fluctuation gives the impression that H(t) is itself a stochastic process, even when H(t) is constant. To avoid this artifact, we introduce sparse modelling for mBm and apply it to Nasdaq time series.     

Shakedown analysis of periodic composites with kinematic hardening material model

Lower-bound limit and shakedown analysis of periodic composites with the consideration of kinematic hardening are carried out on the representative volume element level. In combination with homogenization theory, the homogenized macroscopic admissible loading domains are determined. Furthermore, the strengths of periodic composites by using elastic perfectly plastic, unlimited and linear limited kinematic hardening material models are calculated and compared. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and structural determination of novel 5-arylidene-3-N(2-alkyloxyaryl)-2-thioxothiazolidin-4-ones

As part of our project devoted to the synthesis of heterocycles including thiazole rings, some new 5-arylidene-2-thioxo-3-N-arylthiazolidin-4-ones were synthesized by Knoevenagel condensation. An interesting feature of these compounds is that their chirality is induced by that of their 3-N-(2-alkyloxyaryl)-2-thioxothiazolidin-4-one precursors, which in turn is due to the presence of a C2 axis of chirality. These new compounds were characterized by spectroscopic methods (IR, 1H-NMR, 13C-NMR). The structure of compound (Z)-(2g) was further determined by X-ray diffraction.