Structural characterization of nickel oxide nanowires by X-ray absorption near-edge structure spectroscopy

Nickel oxide nanowires modified by poly(vinylpyrrolidone) (PVP) were synthesized via a simple chemical pattern. For the first time NiO nanowires with diameters ranging from 40 to 100 nm with the expected ratio (length vs diameter) ranging from 54 to 90 were grown using a simple solution-phase approach (mild method). These nickel nanowires exhibited unique photoluminescence features and displayed a significant UV luminescence. X-ray absorption near-edge spectroscopy has been used to characterize the local Ni environment and identify the electronic structure. Comparing experimental and theoretical spectra at the Ni and O K edges, we determine the lattice distortion via the analysis of the characteristic preedge features and the multiple-scattering structures detected in the X-ray absorption near-edge structure spectra. The correlation between experimental features and the disordered or distorted local structures is also discussed.     

Simultaneous kinetic spectrophotometric determination of cyanide and thiocyanate using the partial least squares (PLS) regression

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of CN⁻ and SCN⁻ ions is described. The method is based on the difference in the rate of the reaction between CN⁻ and SCN⁻ ions with chloramine-T in a pH 4.0 buffer solution and at 30 °C. The produced cyanogen chloride (CNCl) reacts with pyridine and the product condenses with barbituric acid and forms a final colored product. The absorption kinetic profiles of the solutions were monitored by measuring absorbance at 578 nm in the time range 20-180 s after initiation of the reaction with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 31 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 10.0-900.0 and 50.0-1200.0 ng mL⁻¹ for CN⁻ and SCN⁻ ions, respectively. The proposed method was successfully applied to the simultaneous determination of cyanide and thiocyanate in water samples.     

Installation of carbon chain onto 2-cyclohexene-1,4-diol monoacetate

Alkylation of cyclohexenyl monoacetate 1 with R₂Cu(CN)(MgCl)₂ or RMgBr/CuCN (cat.) in Et₂O produced trans 1,2-isomers 4, while arylation and alkenylation of 1 was accomplished with lithium borates 5 and a nickel cat. to afford trans 1,4-isomers 3 selectively. Furthermore, several transformations of the products were carried out to demonstrate synthetic advantages of the present reactions.     

Commercially available 5'-DMT phosphoramidites as reagents for the synthesis of vinylphosphonate-linked oligonucleic acids

[reaction: see text]. Commercially available cyanoethyl phosphoramidites derived from T, d(C), d(A), and d(G) were hydrolyzed (1H-tetrazole, MeCN/H2O) to give the corresponding H-phosphonates in excellent yields. Palladium(0)-catalyzed cross-coupling of each of these with the thymidine-derived vinylbromide 2 afforded the corresponding vinylphosphonate-linked dimers TT, d(C)T, d(A)T, and d(G)T in modest to good yields. The TT dimer was further elaborated to give a 5'-DMT-TT-3'-CEP building block, and this was used in the automated synthesis of the TpTTpT tetramer.     

Ion pairing, H-bonding, and π–π interactions in copper(II) complex-organo-networks derived from a proton-transfer compound of the 1,10-phenanthroline-2,9-dicarboxylic acid

The one-pot reaction between the novel proton transfer compound (pydaH₂)²⁺(phendc)²⁻, LH₂, and Cu(II) afforded the compounds (pydaH)₂[Cu(phendc)₂]·10H₂O, 1, and (pydaH)₂[Cu(phendc)(phendcH)]₂·5H₂O, 2, where pyda=2,6-diaminopyridine, and phendcH₂=1,10-phenanthroline-2,9-dicarboxylic acid. The single crystal X-ray diffraction analysis of 1 and 2 revealed that these are two novel self-assembled 3D Cu(II) complex-organo-networks, in which (pydaH)⁺ ions and [Cu(phendc)₂]²⁻ or complex units are held together by ion pairing, H-bonding, and π–π interactions. Magnetic measurements over the temperature range 1.8–310 K revealed no significant magnetic coupling between Cu(II) centers in 1 or 2.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

Nanostructured pure gamma-Fe2O3 via forced precipitation in an organic solvent

Pure maghemite, gamma-Fe(2)O(3), was prepared as ultra fine particles in the nanometer-sized range via the forced precipitation method in an organic solvent. The precipitation of iron(III) ions, from iron(III) chloride in 2-propanol led selectively to highly dispersed particles of ferrihydrite, which upon treatment with temperatures higher than 200 degrees C under dynamic vacuum resulted in high-surface-area particles of gamma-Fe(2)O(3). Precipitation in water also led to ferrihydrite, but the final product, after heating at 300 degrees C, contained a mixture of gamma-Fe(2)O(3) and alpha-Fe(2)O(3) (hematite). The precipitation from iron(III) nitrate in water resulted in goethite which was converted to hematite upon heating. On the other hand, the final product in 2-propanol was a mixture of maghemite and hematite. The products were characterized by FTIR, TGA, XRD, and gas sorption analysis. Nitrogen gas adsorption studies for the pure gamma-Fe(2)O(3) samples revealed mesoporous particles with high surface areas in the range of 70-120 m(2) g(-1) after heat treatment at 300 degrees C. The gamma-Fe(2)O(3) particles retained their gamma-phase as well as their mesoporous structure at relatively high temperatures, as high as 400 degrees C.     

Metallocene–methylaluminoxane catalyst for olefin polymerization. II. Bis-η5-(neomenthyl cyclopentadienyl)zirconium dichloride

Bis(neomenthyl cyclopentadienyl)zirconium dichloride/methyl aluminoxane (η⁵-(NMCp)₂ZrCl₂/MAO) catalyst has been investigated for ethylene polymerization. About 51% of the Zr forms active sites more or less instantaneously according to quenching with tritiated methanol. There is an initial drop of rate of polymerization, R_p, of about 30% which remains constant thereafter. The catalytic activity increases monotonically with temperature; it is proportional to [MAO]^1.75 at a constant [Zr] = 1.5 μM and proportional to [Zr]^?1.2 at a constant [MAO] = 64.5 mM. At very large [MAO]/[Zr], the catalyst has extremely high activity; κ_p = 5 × 10³ (Ms)^?1 at 50°C. There is also facile chain transfer to aluminum, κ = 0.14 s^?1 at 50°C. Both κ_p and κ are about 30 times greater than the corresponding rate constants for MgCl₂ supported TiCl₃ catalysts. The TiCl₃/MgCl₂ and (NMCp)₂/MAO catalysts have nearly the same activation energy for propagation (ca. 7 kcal/mol^?1). The higher activity of the latter is due to its larger preexponential factor in κ_p. The dependence of catalytic activity on the [MAO]/[Zr] ratio may be explained by rapid association-dissociation equilibria of MAO involving acid-base and/or electron deficient bridge complexation.     

Viscosity of concentrated colloidal suspensions: comparison of bidisperse models

In this paper, recent advances in the study of rheological behavior of concentrated bimodal suspensions are briefly reviewed. The predictive models are divided into two categories, namely, the effective volume fraction (or hard sphere scaling) approach and the separation of contributions approach. Predictions of both approaches are compared with experimental data of electrostatically and sterically stabilized suspensions. It is shown that the predictions of both hard sphere scaling and the scaling method of Zaman and Moudgil (J. Colloid Interface Sci. 212 (1999) 167) to separate the contributions of fine and coarse particles are in good agreement with the experimentally observed results. The approach by Dames, Morrison, Wilenbacher (Rheol. Acta 40 (2001) 434) to separate the hard-sphere and non-hard-sphere contributions is investigated using the aqueous silica and polystyrene suspensions respectively. A good agreement is shown for aqueous silica suspensions. However, significant differences between the predictions and experimental data are found for the sterically stabilized polystyrene suspensions, suggesting a more generalized expression is needed. As an attempt to classify the models on the viscosity of colloidal suspensions, the present study will provide guidelines for interpretation of experimental results and for the development of more comprehensive predictive methodologies for polydispersed colloidal dispersions.     

Corrected Debye-Hückel analysis of surface complexation; III. Spherical particle charging including ion condensation

Statistical mechanics has been used to derive a model for the charging of a spherical particle in a salt solution to complement our experimental studies and gain a deeper understanding of the processes involved in surface complexation. Our chosen model goes beyond the equilibrium constants and the Gouy-Chapmann theory currently used in surface complexation models. The proton adsorption is taken to occur at a harmonic potential well on the surface characterized by a frequency v and a well depth u(0). Outside the particle surface there is a capacitor layer of width w(c) which is impenetrable to the salt ions. The diffuse screening of the charged particle is described by a corrected Debye-Hückel analysis accounting for ion size in the ion-ion interactions. To account also for nonlinear electrostatic response a layer of condensed counterions has been introduced. The criterion for the onset of ion condensation is that the electrostatic field exceeds a linear response criterion. Ion size effects are accounted for in terms of hole-corrected electrostatic energies and excluded volume. The model has been applied to titrated surface charge data on goethite (alpha-FeOOH) at various background concentrations and good agreement between the experimental data and the model was obtained. Both the size of the screening ions and the central particle size were shown to be of importance for the surface charge.