Efficient Removal of Lead from Washing Effluent of Lead-contaminated Soil with Garlic Peel

Wastewater produced from the soil washing process contains heavy metals, which limits its reuse for washing. So it is necessary to develop an efficient and economical way to recycle it, and this study presented a biosorption method to realize this goal. A typical soil sample contaminated by lead was taken from the real field near a lead smelting factory, used for the toxic metals extraction with dilute citric acid. A leach liquor was obtained with lead ions at the level of 12.35 mg/L, Cd 1.2 mg/L, Cu 1.5 mg/L, Zn 2.6 mg/L, as well as the coexisting anions, such as sulphate, silicate, chloride at the concentration of several hundred miligram per liter. The garlic peel was modified by a simple chemical saponification process and used as the biosorbent for toxic metal removal. Firstly, the adsorption behavior of lead ions on the saponified garlic peel was systematically investigated using the synthetic solutions, and then the adsorption mechanisms were explored by detailed experiments combining with the thermodynamic calculation reuslts of the aqueous system of Pb(Ⅱ)-citrate-H₂O. It was found that in artificial solution containing 0.01 mol/L citrate, the maximum adsorption capacity of 261.0 mg/g was reached at pH near 3.0, and also at this very pH value the Pb²⁺ and Pb(H₂Cit)⁺ were the dominant lead species, which are favorable for adsorption due to its easier approaching to the -COO^- ligands in the saponified garlic peel partilces via charge attraction, and the appearance of Pb(HCit)⁰ and Pb(Cit)^- at pH above 3.0 inhibits the adsorption. Secondly, the real leach liquor was used for adsorption tests, and twice adsorption under the optimal conditons would decrease the residual concentrations of Pb, Cd, Cu and Zn to zero. After elution by using 0.1 mol/L nitric acid, the adsorbed metals can be recovered and garlic peel can be reused for at least 10 cycles effectively. This study presents a prospective biosorption method for economical and efficient removal of the lead ions from soil washing wastewater with citric acid as the leaching reagent.     

Directed Transport of Brownian Particles in a Periodic Channel

The transport of Brownian particles in the infinite channel within an external force along the axis of the channel has been studied. In this paper, we study the transport of Brownian particle in the infinite channel within an external force along the axis of the channel and an external force in the transversal direction. In this more sophisticated situation, some property is similar to the simple situation, but some interesting property also appears.     

壁面热特性对超声速燃烧室热环境的影响

在分析燃烧室壁面的对流-辐射耦合换热特性基础上,考虑燃烧室热环境与冷却系统间的相互关系,提出了一种以燃烧室材料许用温度为约束的非均匀冷却壁面热特性设计方法.以某型超声速燃烧室为例,采用混合分数平衡化学反应和液滴离散相模型,计算分析了壁面热特性对燃烧室壁面热流构成、热环境及冷却系统热负荷的影响.结果表明,壁面热特性对超声速燃烧室热环境的影响值得重视,非均匀冷却壁面热特性设计能有效减少燃烧室热损失.     

多孔氧化铝模板制备ZnS纳米线阵列及其光致发光谱

利用阳极氧化铝（AAO）模板,采用电化学沉积方法制备出了ZnS纳米线阵列。扫描电子显微镜（SEM）结果显示,AAO模板孔洞分布均匀,孔径基本一致（约50nm）,孔口呈六边形。TEM结果显示硫化锌纳米线的直径约50nm（与AAM模板孔径一致）,长度约为20μm（与AAM模板厚度一致）。电子衍射结果表明ZnS纳米线为多晶结构。比较了AAO模板组装ZnS纳米线阵列前后的光致发光谱,所得光谱显示,组装了ZnS纳米线阵列的模板的光致发光谱比没有组装的空模板相比多出两个发射峰,分别位于409,430nm,且其发光强度随激发波长的增长而增强。解谱分析表明,这即为ZnS纳米线阵列的发光光谱的两个发射峰,是由导带与受主能级间的跃迁发光和施主与受主能级间的复合跃迁发光共同作用所致。发现由于纳米线尺寸的单一性,发射峰窄化明显,半峰全宽较小,这种现象在其他文献中未曾报道过。     

Electrochemical Determination of Reduced Glutathione at Multiwalled Carbon Nanotubes/Poly(bromocresol green)Modified Glassy Carbon Electrode

A multiwalled carbon nanotubes/poly(bromocresol green) modfied glassy carbon electrode (MWNTs-PBG/GCE) was used to investigate the electrochemical behavior of reduced glutathione(GSH). GSH showed an irreversible oxidation process on MWNTs-PBG/GCE with an oxidation peak at 0.77 V(vs. SCE) in a phosphate buffer solution(pH=4.0). The kinetic parameters of the electrochemical behavior of GSH on MWNTs-PBG/GCE were calculated. Under the optimal conditions and with the help of amperometric method, a linear relationship was obtained between the oxidation peak current and GSH concentration in the range from 2×10–7 mol/L to 5×10–6 mol/L with the detection limit as 1×10–8 mol/L(signal-to-noise ratio of 3). The current reached the steady-state current within about 5 s. The modified electrode surface had very good reproducibility and stability.     

江西宜黄中华秋沙鸭自然保护区鱼类资源初步调查

2012年7月,对江西宜黄中华秋沙鸭自然保护区的鱼类资源展开初步调查。结果显示,该保护区分布有鱼类4目7科25种,兴凯鱊、棒花鱼、鲫为优势种,且渔获量丰富、鱼类个体较小。同时分析了保护区面临的潜在威胁,并提出了相应的保护措施。更多还原     

湖南扬子地台砂矿金刚石的红外、拉曼特征及指示意义

产于湖南沅水地区的十颗砂矿金刚石的红外光谱和拉曼光谱的研究结果表明：湖南砂矿金刚石多为I_aAB型,且往往表现为A型氮相对富集;金刚石中的氮含量介于38.30～840.67 μg·g-1之间,且不同金刚石晶体中氮含量差别极大;金刚石在地幔中的存储时间介于0.043～3.315 Ga之间,不同的样品在地幔中的存储时间相差较大,且最长存储时间(3.315 Ga)要大于湘鄂黔桂毗邻区最老岩体的年龄(3.285 Ga);湖南砂矿金刚石在其形成过程中经历过较为显著的环境变化,且菱形十二面体金刚石晶体的形成深度大于八面体金刚石晶体。     

基于过程分析技术和设计空间的金银花醇沉加醇过程终点检测

建立了一种新的基于过程分析技术(PAT)和质量源于设计(QbD)设计空间的中药制药过程终点分析与控制方法.以近红外(NIR)光谱技术为PAT工具, 采集正常操作条件下制药过程的多批次NIR光谱; 采用主成分分析结合移动块相对标准偏差(PCA-MBRSD)法, 确定每一批次过程的理想终点样本(DEPs), 由多批DEPs的光谱信息构成过程终点设计空间; 在过程终点设计空间确定的范围内, 建立多变量统计过程控制(MSPC)模型, 利用多变量Hotelling T²和SPE控制图对过程终点进行判断.应用上述方法, 进行了金银花醇沉加醇过程终点检测研究, 结果表明该方法灵敏、准确, 适宜于中药制药过程终点检测.     

高效液相色谱-串联质谱法同时测定牛奶和奶粉中的青霉素类药物及其主要酶解代谢产物

建立了液相色谱-串联质谱法同时测定牛奶和奶粉中4种青霉素(青霉素G、青霉素V、阿莫西林、氨苄西林)及其4种 β-内酰胺酶酶解产物(青霉素G脱羧噻唑酸、青霉素V脱羧噻唑酸、阿莫西林脱羧噻唑酸、氨苄西林脱羧噻唑酸)残留的方法。样品采用乙腈-水提取,浓缩后经HLB柱净化,用液相色谱-串联质谱检测,外标法定量。结果表明,青霉素原药在4~200 μg/L,酶解产物在10~500 μg/L范围呈良好线性,线性相关系数均大于0.99;样品检出限为5~50 μg/kg(S/N≥3),定量限为8~100 μg/kg(S/N≥10);对牛奶和奶粉样品分别进行3个水平的加标回收实验(n=6),牛奶中青霉素及其酶解产物的平均回收率为83.48%~96.97%,相对标准偏差为3.86%~10.87%;奶粉中青霉素及其酶解产物的平均回收率为82.70%~95.14%,相对标准偏差为3.02%~9.81%。该方法稳定、可靠,适用于牛奶和奶粉中青霉素类药物及其酶解代谢产物的测定。     

主链含酰亚胺环和炔基的聚酰亚胺型聚氨酯弹性体的合成及阻燃性能

以均苯四甲酸酐、 D,L-苯丙氨酸和1,4-丁炔二醇为原料合成了一种含有酰亚胺环和炔基的二醇, 并以其为扩链剂, 采用预聚体法, 与4,4-二苯基甲烷二异氰酸酯(MDI)和聚四氢呋喃醚二醇(PTMG)反应, 合成了不同硬段含量的主链含有酰亚胺环和炔基的热塑性聚酰亚胺型聚氨酯弹性体. 用红外光谱(FTIR)、 电子拉力机、 热失重分析(TG)、 广角X射线衍射(XRD)、 UL-94垂直燃烧和极限氧指数对聚酰亚胺型聚氨酯弹性体进行了表征. 结果表明, 这种聚氨酯呈现出无定形结构; 其拉伸强度随着硬段含量的增加而增大; 与传统的热塑性聚氨酯相比, 酰亚胺环和炔基改性的聚酰亚胺型聚氨酯弹性体的热分解过程非常缓慢, 呈现出较好的热稳定性; 不同硬段含量的聚酰亚胺型聚氨酯弹性体的UL-94垂直燃烧均达到V-2级别; 其极限氧指数随着硬段含量的增加而增大.