Palladium-catalyzed cascade reaction of alpha,beta-unsaturated sulfones with aryl iodides

Unlike traditionally used acyclic 1,2-disubstituted alkenes, the reaction of alpha,beta-unsaturated phenyl sulfones with aryl iodides under Heck reaction conditions (Pd(OAc)(2) as catalyst, Ag(2)CO(3) as base in DMF at 120 (0)C) takes place mainly by a cascade process, involving one unit of the alkene and three units of the aryl iodide, to afford a substituted 9-phenylsulfonyl-9,10-dihydrophenanthrene. The dominant formation of this 3:1 coupling product, instead of the Heck trisubstituted olefin, shows that aromatic C-H bond activation processes can compete with the usually fast syn beta-hydrogen elimination step in the Heck arylation of an acyclic olefin. The structural scope of this palladium-catalyzed cascade arylation of alpha,beta-unsaturated sulfones has proved to be wide with regard to substitution at the beta-position (alkyl, aryl, or alkenyl substitution), substitution at the sulfone unit (alkyl or phenyl sulfones), and configuration at the CdoublebondC bond (trans or cis). Moreover, although less favored than in the case of the arylation of alpha,beta-unsaturated sulfones, similarly substituted 9,10-dihydrophenanthrenes have also been obtained in the case of alpha,beta-unsaturated phosphine oxides and alpha,beta-unsaturated phosphonate esters. A Pd(0)-Pd(II)-Pd(IV) mechanistic pathway involving the successive formation of highly electrophilic sigma-alkylpalladium intermediates and palladacycles is proposed for this multicomponent arylation.     

Liquid chromatographic determination of aliphatic amines in water using solid support assisted derivatization with 9-fluorenylmethyl chloroformate

Summary A simple and sensitive method has been developed for the liquid chromatographic determination of short-chain aliphatic amines in water. Analytes are retained in solid-phase extraction (SPE) cartridges, and then derivatized by drawing an aliquot of the fluorogeneic reagent 9-fluorenylmethyl chloroformate (FMOC) through the cartridges. After a certain reaction time the derivatives formed are desorbed with acetonitrile. The collected extracts are then chromatographed on a LiChrospher 100 RP₁₈ 125 mm×4 mm i.d., 5 μm, column using an acetonitrile-water gradient. The influence of experimental conditions (SPE material, volume of sample, concentration of FMOC, time of reaction and pH) has been investigated. Optimal results have been obtained with C₁₈ SPE cartridges using a sample volume of 5.0 mL. For derivatization, 0.25 mL aliquots of 25 mM FMOC have been used, the reaction time being only 2 min. The method has been applied to the quantification of several aliphatic amines: methylamine, ethylamine, dimethylamine,n-butylamine,n-pentylamine andn-hexylamine. Under the proposed conditions the percentages of analytes retained plus derivatized were of about 54–107% compared to those obtained with direct solution derivatization. The method provided good reproducibility, linearity and accuracy within the 0.050–1.0 mg L⁻¹ concentration range. The limits of detection were in the 0.25–5.0 μg L⁻¹ range. The utility of the described approach has been tested by analysing tap water, river water and industrial waste water.     

Rapid determination of minority organic acids in honey by high-performance liquid chromatography

A rapid high-performance liquid chromatographic method for the determination of organic acids in honey is reported. Malic, maleic, citric, succinic and fumaric acids were identified and quantified in 15 min. First time repeatibility, reproducibility and recoveries were determined out for these acids in honey samples. Maleic acid was also quantified for first time by a chromatographic method. The organic acids were removed from honey by using a solid-phase extraction procedure with anion-exchange cartridges. Previously, the solution of honey was adjusted to pH 10.50 with 0.1 M NaOH and stirred for 15 min at room temperature. Then, this solution was adjusted to pH 5.00 with 0.1 M H2SO4. This procedure was carried out to avoid interferences in the baseline. The chromatographic separation was achieved with only one Spherisorb ODS-2 S5 column thermostated at 25 degrees C. Metaphosphoric acid (pH 2.20) was used as mobile phase at a flow-rate of 0.7 ml/min. Organic acids were detected with a UV-vis detector (215 nm). The precision results showed that the relative standard deviations of the repeatability and reproducibility were < or =3.20% and < or =4.86%, respectively. The recoveries of the organic acids ranged from 62.9 to 99.4%. Under optimum conditions the detection limits ranged from 0.0064 to 7.57 mg/kg and the quantification limits ranged from 0.025 to 10.93 mg/kg.     

Accurately solving the electronic Schrodinger equation of small atoms and molecules using explicitly correlated (r12-)MR-CI. VIII. Valence excited states of methylene (CH2)

We compute the adiabatic transition energies of methylene (CH(2)) from the ground state to the lowest electronically excited valence states using the r(12)-MR-ACPF-2 method with a large basis set and an extended reference space. We recall that this method aims at reaching the basis-set and full configuration interaction (CI) limits simultaneously. Our best excitation energies, T(e) (T(0)), are 9.22 (8.87) (a (1)A(1), corrected for relativistic and adiabatic effects), 31.98 (31.86) (b (1)B(1)), and 57.62 (57.18) kcal mol(-1) (c (1)A(1)) (both uncorrected). We are able to reach the respective basis-set limits that closely that the remaining errors of our (uncorrected) calculations are clearly due to the MR-ACPF-2 method. While we are unable to assess the error of the latter method in a systematic way, we still believe that it is rather unlikely that the errors of our excitation energies exceed +/-0.10 kcal mol(-1). We finally observe that our (corrected) a state values deviate by only -0.10 (-0.10) kcal mol(-1) from the results of Csaszar et al. [J. Chem. Phys. 118, 10631 (2003)]--who did careful extrapolations to the valence full-CI and basis-set limits and added a correction for the core correlation--and that the deviation from experiment is only -0.13 (-0.13) kcal mol(-1). From these excellent agreements we conclude that our excitation energies to the b and c states are similarly accurate.     

Direct iodination of alkanes

[reaction: see text] A cheap and efficient iodination of hydrocarbons can be achieved by generating tert-butyl hypoiodite from iodine and sodium tert-butoxide. The alkane is reactant and solvent, and this metal-free process provides a clean solution for their direct iodination.     

Fourier Transform Infrared Spectroscopy and Solid Phase Extraction Applied to the Determination of Oil and Grease in Water Matrices

 The solid phase extraction as a solvent-free method for the analysis of oil and grease in waters was studied. The use of a PTFE surface as a solid phase allows the retention of the volatile fraction of oil and grease, and further analysis of carbon–hydrogen bonds using infrared spectroscopy can be done on the surface. Various oils and grease samples were tested: n-hexadecane, n-tetradecane, n-nonadecane, n-docosane, isooctane, diesel oil and gasoline. Temperatures from 25° to 90 °C and a range of heating times were checked for extraction. Precision tests showed relative standard deviation values of around 10% in several samples of the same concentration. Calibration lines of n-hexadecane showed high correlation coefficients from 0.9 to 30 mg/l. Recoveries for the various oils using different calibration lines showed values from 90 to 110%. The method described here is fast and clean, and allows reproducible measurements of oil and grease in water that do not require the use of a solvent. Received March 1, 2001; accepted August 15, 2001; published online July 15, 2002     

Reactivity of amino acids in nitrosation reactions and its relation to the alkylating potential of their products

Nitrosation reactions of amino acids with an -NH(2) group [namely, six alpha-amino acids (glycine, alanine, alpha-aminobutyric acid, alpha-aminoisobutyric acid, valine, and norvaline); two beta-amino acids (beta-alanine and beta-aminobutyric acid), and one gamma-amino acid (gamma-aminobutyric acid)] were studied. Nitrosation was carried out in aqueous acid media, mimicking the conditions of the stomach lumen. The rate equation was r = k(3)(exp)[amino acid][nitrite](2), with a maximum k(3)(exp) value in the 2.3-2.7 pH range. The existence of an isokinetic relationship supports the argument that all the reactions share a common mechanism. A nitrosation mechanism is proposed, and the following conclusions are drawn: (i) Nitrosation reactions of amino acids with a primary amino group in acid media occur with dinitrogen trioxide as the main nitrosating agent. The finding that the nitrosation rate is proportional to the square of the nitrite concentration suggests that the yield of nitrosation products in the stomach would increase sharply with higher nitrate/nitrite intakes. (ii) Stomach hypochlorhydria could be a potential enhancer of in vivo amino acid nitrosation. (iii) The reactivity (k(3)()(exp)) [alpha-amino acids > beta-amino acids > gamma-amino acids] is the same as that found in a previous work for the alkylating potential of lactones formed from nitrosation products of the same amino acids. This implies that the nitrosation reactions of the most common natural amino acids are the most efficient precursors of the most powerful alkylating agents. (iv) The order of magnitude (10(7)-10(8) M(-1) s(-1)) of the bimolecular rate constants of nitrosation shows that such reactions occur through an encounter process.     

Particle and surface characterization of a natural illite and study of its copper retention

Illite clays are known to have a strong affinity for metallic pollutants in the environment and can be applied as low-cost adsorbents for industrial waste treatment. A crucial factor in the development of such applications, however, is the understanding of the chemical, mineralogical, and colloidal properties of these clays. It is also important to understand the mechanisms involved in the surface adsorption of metals by these adsorbants. In order to study the retention of transition metals on illite clays, we have applied surface characterization techniques such as FPIA, SEM-EDX, XRD, N2 (77 K) adsorption, and FTIR. In addition to these experimental techniques, we have also employed a theoretical model that accounts for the chemistry of transition metal ions, and considers the global retention process to be the sum of several single retention processes. This model adequately fits the experimental data and allows for the speciation of metal retention on illite surfaces. Between pH values of 2.53 and 3.01 the only adsorption processes are the electrostatic sorption of [Cu(H2O)6]2+, and the surface complexation of [Cu(H2O)6]2+ and [Cu(OH)(H2O)5]+ ions. Surface complexation of [Cu(OH)(H2O)5]+ ions increases with pH, overcoming [Cu(H2O)6]2+ retention, and thus contributing to the surface precipitation of Cu(OH)2.     

Alkynyldiphenylphosphine d8 (Pt, Rh, Ir) complexes: contrasting behavior toward cis-[Pt(C6F5)2(THF)2

The synthesis and characterization of a series of mononuclear d(8) complexes with at least two P-coordinated alkynylphosphine ligands and their reactivity toward cis-[Pt(C(6)F(5))(2)(THF)(2)] are reported. The cationic [Pt(C(6)F(5))(PPh(2)C triple-bond CPh)(3)](CF(3)SO(3)), 1, [M(COD)(PPh(2)C triple-bond CPh)(2)](ClO(4)) (M = Rh, 2, and Ir, 3), and neutral [Pt(o-C(6)H(4)E(2))(PPh(2)C triple-bond CPh)(2)] (E = O, 6, and S, 7) complexes have been prepared, and the crystal structures of 1, 2, and 7.CH(3)COCH(3) have been determined by X-ray crystallography. The course of the reactions of the mononuclear complexes 1-3, 6, and 7 with cis-[Pt(C(6)F(5))(2)(THF)(2)] is strongly influenced by the metal and the ligands. Thus, treatment of 1 with 1 equiv of cis-[Pt(C(6)F(5))(2)(THF)(2)] gives the double inserted cationic product [Pt(C(6)F(5))(S)mu-(C(Ph)=C(PPh(2))C(PPh(2))=C(Ph)(C(6)F(5)))Pt(C(6)F(5))(PPh(2)C triple-bond CPh)](CF(3)SO(3)) (S = THF, H(2)O), 8 (S = H(2)O, X-ray), which evolves in solution to the mononuclear complex [(C(6)F(5))(PPh(2)C triple-bond CPh)Pt(C(10)H(4)-1-C(6)F(5)-4-Ph-2,3-kappaPP'(PPh(2))(2))](CF(3) SO(3)), 9 (X-ray), containing a 1-pentafluorophenyl-2,3-bis(diphenylphosphine)-4-phenylnaphthalene ligand, formed by annulation of a phenyl group and loss of the Pt(C(6)F(5)) unit. However, analogous reactions using 2 or 3 as precursors afford mixtures of complexes, from which we have characterized by X-ray crystallography the alkynylphosphine oxide compound [(C(6)F(5))(2)Pt(mu-kappaO:eta(2)-PPh(2)(O)C triple-bond CPh)](2), 10, in the reaction with the iridium complex (3). Complexes 6 and 7, which contain additional potential bridging donor atoms (O, S), react with cis-[Pt(C(6)F(5))(2)(THF)(2)] in the appropriate molar ratio (1:1 or 1:2) to give homo- bi- or trinuclear [Pt(PPh(2)C triple-bond CPh)(mu-kappaE-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)Pt(C(6)F(5))(2)] (E = O, 11, and S, 12) and [(Pt(mu(3)-kappa(2)EE'-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)(2))(Pt(C(6)F(5))(2))(2)] (E = O, 13, and S, 14) complexes. The molecular structure of 14 has been confirmed by X-ray diffraction, and the cyclic voltammetric behavior of precursor complexes 6 and 7 and polymetallic derivatives 11-14 has been examined.     

Production of lepton pairs in processes with hadronic jets

We propose a model for the production of extra (additional) lepton pairs in deep inelastic lepton-hadron scattering, e⁺e^– annihilation and large p_T processes. Extra lepton pairs are supposed to be originated by annihilations of quarks and antiquarks created during the space-time evolution of quark initiated jets. This mechanism yields predominantly dileptons with rather low masses. Predictions following from the model are compared with the recent data on trimuon production in neutrino-nucleon interactions. It is also suggested that internal hard processes can lead to dileptons with both small and large masses. The latter mechanism has rather small cross section but it is particularly interesting from the point of view of the simple quark-parton model.Dedicated to Academician Václav Votruba on the occasion of his seventieth birthday.