Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

The reactivity of 2-vinylindoles with dimethyl acetylenedicarboxylate

The overall rates of reaction of 1-substltuted-1- (1-methyl-2-indolyl)ethenes with dimethyl acetylenedicarboxylate are considerably lower than those of the corresponding 2-vinyl- pyrroles. Steric interaction between the N-methyl group on the indole ring and the 1-substituent on the ethenyl group prevents the diene system adopting a coplanar $\text{cisoid}$ configuration and, thereby, inhibits the _π4 + _π2 cycloaddition reaction of the system with dimethyl acetylenedicarboxylate. Under such conditions, the indolylethene preferentially undergoes a Michael addition reaction at the 3-position. The _π4 + _π2 cycloaddition reaction is promoted at elevated temperatures. No evidence was found for a Cope rearrangement of the Michael adducts to give the dihydrocarbazole.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).     

Nitrosation of Phenolic Compounds: Effects of Alkyl Substituents and Solvent

Summary.  Nitrosation reactions of phenol, o-cresol, 2,6-dimethylphenol, o-tert-butylphenol, 2-hydroxyacetophenone, and 2-allylphenol in water and water/acetonitrile were studied. Kinetic monitoring of the reactions was accomplished by spectrophotometric analysis of the nitrosated products at 345 nm. The dominant reaction was C-nitrosation via a mechanism consisting of an attack on the nitrosatable substrate by NO⁺/NO₂H₂ ⁺ followed by a slow proton transfer. The values of the rate constants of phenolic C-nitrosation were increased by electron donating substituents, and a good Hammett correlation was observed with ρ = −6.1. The results also revealed the strong effect of pH and the permitivity of the reaction medium on the rate constant, whose maximum values were observed for pH ≈ 3, decreasing strongly for higher pH values. The study in water/acetonitrile with up to 25% acetonitrile showed that it is possible to inhibit the reaction strongly by increasing the percentage of the organic component. The conclusions drawn show that (i) it is possible to predict the rate of nitrosation of phenolics as a function of the meta-substituents on the phenol ring and (ii) the nitrosation of phenolics can be strongly inhibited by increasing the pH of the reaction medium as well as by lowering its dielectric constant. Received July 13, 2001. Accepted (revised) September 18, 2001     

Comparative study of separation and determination of triazines by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis: application to residue analysis in natural waters

The separation and determination of a mixture of chloro- and methylthiotriazines in water samples by both micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary zone electrophoresis (NA-CZE) were compared. The characteristics of both methods proved to be very similar in terms of separation efficiency and analysis times, but application of these methods for the analysis of triazines in natural waters, with a prior preconcentration step, revealed significant differences. A preconcentration step by solid-phase extraction (SPE) with Oasis HLB cartridges was accomplished for the determination of triazines at sub-ppb levels in drinking and river waters; when NA-CZE was used after this SPE step, electropherograms with fewer interferences and more stable baselines were obtained than when separation was carried out using MEKC. Another aspect related to the application to real samples was the lack of precision encountered upon evaluating the electrophoretic signals generated when using SPE coupled with NA-CZE. Here, we demonstrate the importance of choosing an appropriate internal standard for analyte quantification. It is recommended that a triazine belonging to the same family as that of the triazine to be determined should be used as internal standard.     

Determination of organophosphorus and triazine pesticides in olive oil by on-line coupling reversed-phase liquid chromatography/gas chromatography with nitrogen-phosphorus detection and an automated through-oven transfer adsorption-desorption interface

A method is described for the simultaneous determination of organophosphorus and triazine pesticides in olive oil, whereby reversed-phase liquid chromatography (LC) is coupled to gas chromatography by means of an automated through-oven transfer adsorption-desorption (TOTAD) interface. The olive oil needs to be filtered only before it is loaded into the liquid chromatograph, where preseparation of the pesticide residues from the other olive oil components is carried out by using methanol-water as the eluant. The LC fraction containing the pesticides is automatically transferred to the gas chromatograph by using the TOTAD interface, which almost totally eliminates the solvent, so that water-sensitive detectors such as the nitrogen-phosphorus detector can be used. Detection limits range from 0.07 to 0.38 microg/L for organophosphorus pesticides and from 6.0 to 7.0 microg/L for triazines. The results were compared with those obtained by flame ionization detection.     

Carbohydrate-based DNA ligands: sugar-oligoamides as a tool to study carbohydrate-nucleic acid interactions

Sugar-oligoamides have been designed and synthesized as structurally simple carbohydrate-based ligands to study carbohydrate-DNA interactions. The general design of the ligands 1-3 has been done as to favor the bound conformation of Distamycin-type gamma-linked covalent dimers which is a hairpin conformation. Indeed, NMR analysis of the sugar-oligoamides in the free state has indicated the presence of a percentage of a hairpin conformation in aqueous solution. The DNA binding activity of compounds 1-3 was confirmed by calf thymus DNA (ct-DNA) NMR titration. Interestingly, the binding of the different sugar-oligoamides seems to be modulated by the sugar configuration. Semiquantitative structural information about the DNA ligand complexes has been derived from NMR data. A competition experiment with Netropsin suggested that the sugar-oligoamide 3 bind to DNA in the minor groove. The NMR titrations of 1-3 with poly(dA-dT) and poly(dG-dC) suggested preferential binding to the ATAT sequence. TR-NOE NMR experiments for the sugar-oligoamide 3-ct-DNA complex both in D(2)O and H(2)O have confirmed the complex formation and given information on the conformation of the ligand in the bound state. The data confirmed that the sugar-oligoamide ligand is a hairpin in the bound state. Even more relevant to our goal, structural information on the conformation around the N-glycosidic linkage has been accessed. Thus, the sugar asymmetric centers pointing to the NH-amide and N-methyl rims of the molecule have been characterized.     

Rare earth metal complexes with 1,3-bis-(2-hydroxyphenyl)-1,3-propanedione. An example of anhydrous rare earth β-diketonates

Summary The interaction of non-anhydrous solutions of the ligand 1,3-bis-(2-hydroxyphenyl)-1,3-propanedione (bhppH₃) with hydrated rare earth chlorides resulted in the formation of anhydrous, non-solvated, complexes M(bhppH₂)₃ (M=Y, La, Nd, Pr, Sm or Yb). The complexes have been characterized by elemental analysis, t.g., i.r. and¹H n.m.r. spectroscopy. The evidence suggests that the coordination is through the -diketone site.