应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

混合指数更新模型下平均折现惩罚函数

本文讨论了以混合指数分布为点间间距的更新风险模型下平均折现惩罚函数, 在简单条件下, 利用Dickson and Hipp (2001)中引入的变换方法, 得到了平均折现惩罚函数的Laplace变换的精确表达式.     

GLOBAL WEAK SOLUTIONS OF THE RELATIVISTIC VLASOV-KLEIN-GORDON SYSTEM IN TWO DIMENSIONS

In this paper we consider the system of classical particles coupled with a Klein-Gordon field in two dimensions.We establish a-priori-bounds on the solutions of this system with initial data satisfying a size restriction derived from conservation of energy.This result,together with the smoothing of"velocity averaging",yields the existence of global weak solutions to the corresponding restricted initial value problem.The size restriction is necessary since energy of the system is indefinite.Finally,we show that the weak solutions preserve the total mass.     

利用向量探索点的位置

通过对高二数学 (下B)第九章的学习知道 ,几何研究的一种重要思路是代数化 .向量使几何问题代数化 ,摒弃了繁杂的几何推理 ,降低了思维的难度 ,下面用向量探讨满足某一性质的点的位置的实例加以说明 .1　已知线与面垂直例 1　如图 1,正四棱锥P -ABCD中 ,底面边长为 2 ,侧面PAD与底面成 6 0°角且PM⊥AD ,E是PB图 1　例 1图的中点 ,在面PAD上找一点F ,使EF⊥面PBC .解　如图 1,过点P作PO⊥面ABCD .以O为原点建立如图 1所示空间直角坐标系 ,其中Oy∥AB ,Ox∥DA .在面PAD上任意找一点F ,过点F作NF⊥AD ,FH⊥面ABCD ,∴N…     

非奇异单圈图的刻划

边数等于顶点个数的连通图称为单圈图.本文修正了文献[1]中关于奇异单圈图的充要条件,并且利用该条件证明了文献[2]中一个关于非奇异单圈图的猜想.     

巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

在教改实践中改进和完善新编教材

同济大学应用数学系编写的面向 2 1世纪课程教材《微积分》由高教出版社正式出版已三年多了 .在此期间 ,我校围绕新教材的使用 ,广泛听取了校内外教师和专家的意见和建议 ,对教材中存在的问题和不足之处进行修正 ,到今年初 ,完成了该书第二版的编写 ,新版已在七月份正式出版面世 .在这次修订中 ,除了对原书中存在的不当与错误之处作订正外 ,主要围绕提高教材的可教学性这个中心 ,就一些问题进行了再思考 ,并根据教改实践的经验及同行们的意见得出了自己的认识和结论 ,对教材作了修订 .前几年 ,国家出版了一大批改革教材 ,经过一段时期的使用…     

High-Density Read-Only Memory Disc with Ag11In12Sb51Te26 Super-Resolution Mask Layer

A novel read-only memory (ROM) disc with an Ag11ln12Sb51Te26 super-resolution mask layer is proposed and investigated for the first time to our knowledge. The carrier-to-noise ratio of more than 40 dB could be obtained from small pits (380nm), which are below the readout resolution limit (400nm), in our dynamic setup with a wavelength of 632.8 nm and numerical aperture of 0.40. Dependences of carrier-to-noise ratio on readout power,readout velocity and film thickness are studied. The results show that the optimum film thickness is 20-50nm and the corresponding carrier-to-noise ratio is more than 40dB at readout power of 4mW and readout velocity of 2m/s in our experiment. The super-resolution readout mechanism for this ROM disc is also discussed.     

Effect of the geometry of workpiece on polishing velocity in free annular polishing

Base on Coulomb friction model, the workpieces with different geometry rotating in free annular polishing are simulated. From simulation, the following conclusions are drawn. The angular velocity of workpiece is higher than that of polishing pad if the ring rotates uncontrolled in free annular polishing. The circular workpiece can synchronize with polishing pad through controlling the rotation of ring, which depends on the radii of ring and workpiece, the friction coefficients of polishing pad-workpiece and ring-workpiece, and the angular velocity of polishing pad. The workpiece with sharp corner cannot contact with the ring contiguously, which causes the contact state changing and the angular velocity of workpiece fluctuating ceaselessly, and this type of workpiece should be controlled with clamp to rotate synchronistically with the polishing pad.