Prediction of the global energy minimum conformation of polypeptides by the High Directional Monte Carlo procedure

Abstract

A new Monte Carlo sampling scheme, namely High Directional Monte Carlo procedure, is used to obtain the global energy minimum conformations of polypeptides such as enkephalin and melittin. The resultant structures of enkephalin and melittin agree well with previous results of theoretical and experimental studies. Particularly, it is shown that some important parts in the conformation, such as the hinge region that principally determines the tertiary structure of proteins, are correctly described by the new method. The resultant structures are compared with those of other works and their stereoscopic views are shown.     

Non-enzymatic hydrogen peroxide sensor based on a gold electrode modified with granular cuprous oxide nanowires

Granular nanowires with a diameter of about 60 nm were fabricated from cuprous oxide (Cu₂O) by an electrochemical method using anodic aluminium oxide as the template. A non-enzymatic sensor for hydrogen peroxide (H₂O₂) was then developed on the basis of a gold electrode modified with Cu₂O nanowires and Nafion. The resulting sensor enables the determination of H₂O₂ with a sensitivity of 745 μA?mM^?1?cm^?2, over a wide linear range (0.25 μM to 5.0 mM), and with a low detection limit (0.12 μM). The results demonstrate that the use of such granular nanowires provides a promising tool for the design of non-enzymatic chemical sensors.

Ethylene Glycol as New Mobile Phase for Resolution of Two-Component Mixture of Cationic Surfactants on Alumina Surface

Aqueous ethylene glycol (ethane 1,2 diol) as a green mobile phase has been used for thin layer chromatographic (TLC) studies of cationic surfactants on alumina layers. Nineteen solvent systems were used to examine the mobility of the surfactants and to discover the best TLC system for the selective separation of dodecyl trimethylammonium bromide (DTAB) from multi-component mixture of other surfactants. Among the TLC systems studied, M₃ (ethylene glycol: water, 8:2) was best for achieving the selective separation of DTAB from multi-component mixture of other surfactants because in this mobile phase mobility of all surfactants except DTAB were insignificant. Effect of organic additives in aqueous ethylene glycol mobile phase on the mobility of surfactants was examined. The results obtained on laboratory made alumina TLC plates and commercially available precoated alumina HPTLC plates were compared. The lower limits of detection of DTAB, CPC, CTAB, HDTAC, and TTAB were 0.02, 0.05, 0.04, 0.06, or 0.08 µg per zone respectively. The resolution of mixture of cationic surfactants was also examined in the presence metal cations as an impurity in the analyzed sample.     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10–35%, elastic moduli of 3–14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape‐changing membranes, and/or microfluidics.     

Effect of the twisted alignment on the liquid crystal wave‐front corrector

The effect of twisted alignment on the phase modulation of a liquid crystal wave‐front corrector was investigated. First, the effect of twisted alignment is discussed in terms of the modulation principle of the liquid crystal molecule. Only partial incident light can be modulated because of the effect of the twisted alignment. Other unmodulated light will affect the correction accuracy and the resolution of the image. The blazed grating method is proposed to solve this problem. Adaptive correction was performed without the blazed grating method and the correction results are poor. A similar adaptive correction experiment was performed with the blazed grating method and a better correction result is obtained. The residual averaged wave‐front errors are PV = 0.101λ and RMS = 0.015λ and a resolvable image is obtained.     

In situ self-assembly synthesis of gold nanoparticle arrays on polystyrene microspheres and their surface plasmon resonance

Gold (Au) nanoparticle arrays with tunable morphology and optical characteristics were synthesized by in-situ self-assembly process that occurred on the surface of aniline-modified polystyrene (PS) microspheres. The method can be used to control the growth of both single and aggregated Au nanoparticle arrays on PS microsphere surface. This method could also be adapted for synthesis of other noble metals hybrid materials, which opens exciting opportunities for their practical applications.     

Total synthesis of methyl l-daunosaminide hydrochloride via chiral 1,3-oxazine

Total synthesis of methyl l-daunosaminide hydrochloride was achieved from readily available l-tyrosine. Key steps in this strategy were palladium(0) catalyzed stereoselective intramolecular oxazine formation and catalytic hydrogenation of oxazine intermediate. This paper reported ¹H and ¹³C NMR data of α- and β-anomer of methyl l-daunosaminide hydrochloride.     

A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Solar Driven Gas Phase Advanced Oxidation Processes for Methane Removal - Challenges and Perspectives

Methane (CH₄) is a potent greenhouse gas and the second highest contributor to global warming. CH₄ emissions are still growing at an alarmingly high pace. To limit global warming to 1.5 °C, one of the most effective strategies is to reduce rapidly the CH₄ emissions by developing large-scale methane removal methods. The purpose of this perspective paper is threefold. (1) To highlight the technology gap dealing with low concentration CH₄ (at many emission sources and in the atmosphere). (2) To analyze the challenges and prospects of solar-driven gas phase advanced oxidation processes for CH₄ removal. And (3) to propose some ideas, which may help to develop solar-driven gas phase advanced oxidation processes and make them deployable at a climate significant scale.     

Flexible strain sensor with ridge-like microstructures for wearable applications

The flexible stretchable sensors have great potential for implementation in various applications, such as intelligent soft robots, health monitoring, and motion detection. However, most of the flexible stretchable sensors with microstructures and high sensitivities are fabricated by expensive templates and complex processes. In consideration of large-scale fabrication, a low cost and efficient way is in great demand. Herein, electroless plating on Nafion films with decent swelling ratios are proposed to fabricate stretchable sensors with wrinkle-structured electrodes. By adding isopropanol (IPA) to the electroless plating process, the H₂O-IPA sensor with larger swelling ratio shows deeper surface wrinkles, higher surface roughness, and better sensitivity to strain. At the same time, the H₂O-IPA sensor exhibit good durability (500 cycles). By mounting the sensor on the joint of human finger, the motion of the finger bending and even the bending degree can be accurately detected, indicating the potential use in the field of wearable devices and soft electronic skins.