Effects of SnO2 addition on the magnetic properties of manganese zinc ferrites

SnO₂ was added to high-permeability MnZn ferrites and MnZn ferrites for high-frequency power supplies. The effects of the SnO₂ addition were studied. Sn⁴⁺ ions can dissolve into the spinel lattice and form stable Fe²⁺–Sn⁴⁺ pairs and hence can compensate the magneto-crystalline anisotropy constant K₁ and improve the initial permeability effectively. The initial permeability of ferrites is also improved as abnormal grain growth caused by ion vacancy is controlled with SnO₂ doping. In addition, the SnO₂ doping also leads to a decrease in the relative loss factor and an increase in density. The power loss and minimum power loss temperature decrease with SnO₂ doping.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

The Sheffer group and the Riordan group

We define the Sheffer group of all Sheffer-type polynomials and prove the isomorphism between the Sheffer group and the Riordan group. An equivalence of the Riordan array pair and generalized Stirling number pair is also presented. Finally, we discuss a higher dimensional extension of Riordan array pairs.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

Features of the total disintegration events of heavyemulsion targets caused by 4.5A GeV/c16O

Total disintegration events produced by 4.5\,A GeV/c $^{16}$O--AgBr interactions are analysed to investigate the characteristics of secondary charged particles produced in such collisions. The multiplicity distributions of grey, black, and relativistic charged particles can be well represented by Gaussian distribution. The average multiplicity of grey particles is found to increase with the mass of projectile increasing, while that of black particles is found to decrease with the mass of projectile increasing. This result is in good agreement with the prediction of fireball model. Finally, the linear dependence between grey and black particles is observed, but there is no distinct dependence between the production of relativistic charged particles and the target excitation.     

溶胀后的弹性印章进行毛细微模塑

用溶胀后的聚二甲基硅氧烷弹性印章进行毛细微模塑,得到了聚苯乙烯丙酮溶液的微四方点阵图案．较少的PS溶液滴加量会造成孤立不相连的微点阵图形．同时还获得了由于在收缩过程中各部分溶剂挥发速度不一造成的特殊的微点阵图案．     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

Far-infrared signature of animal tissues characterized by terahertz time-domain spectroscopy

We present terahertz time-domain spectroscopy characterization of various animal tissues obtained from pork and rats. As the sensitivity of terahertz radiation to polar molecules of water is very high, biological tissues with high level of hydration show strong absorption at terahertz frequencies. The experimental data indicate that skin, fat and lean pork tissues have different frequency-dependent response to terahertz radiation due to the variation in water content. The same type tissue from different animals, however, is observed to show very similar water absorption.     

Shadowing and Inverse Shadowing for C^1 Endomorphisms

In this paper, we consider the shadowing and the inverse shadowing properties for C^1 endomorphisms. We show that near a hyperbolic set a C^1 endomorphism has the shadowing property, and a hyperbolic endomorphism has the inverse shadowing property with respect to a class of continuous methods. Moreover, each of these shadowing properties is also ＂uniform＂ with respect to C^1 perturbation.