Self-assembling Dimeric and Trimeric Aggregates Based on Solvophobic and Charge-pairing Interactions

Self-assembly processes based on shape complementarity and noncovalent binding interactions are widely recognized as a fundamental principle in nature. Besides charge pairing and hydrogen bonding, hydrophobic interactions play a crucial role in water. Here we report the self-assembly of structurally simple monomers to yield defined dimeric and trimeric aggregates in highly polar media, based on ionic and solvophobic interactions. NMR, mass spectrometry and curve fitting were used to characterize these supramolecular assemblies in water–methanol solutions.     

Sodiation as a tool for enhancing the diagnostic value of MALDI‐TOF/TOF‐MS spectra of complex astaxanthin ester mixtures from Haematococcus pluvialis

The microalga Haematococcus pluvialis produces the pigment astaxanthin mainly in esterified form with a multitude of fatty acids, which results in a complex mixture of carotenol mono‐ and diesters. For rapid fingerprinting of these esters, matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF/TOF‐MS) might be an alternative to traditional chromatographic separation combined with MS. Investigation of ionization and fragmentation of astaxanthin mono‐ and diester palmitate standards in MALDI‐TOF/TOF‐MS showed that sodium adduct parent masses [M + Na]⁺ gave much simpler MS² spectra than radical / protonated [M]^+● / [M + H]⁺ parents. [M + Na]⁺ fragments yielded diagnostic polyene‐specific eliminations and fatty acid neutral losses, whereas [M]^+● / [M + H]⁺ fragmentation resulted in a multitude of non‐diagnostic daughters. For diesters, a benzonium fragment, formed by polyene elimination, was required for identification of the second fatty acid attached to the astaxanthin backbone. Parents were forced into [M + Na]⁺ ionization by addition of sodium acetate, and best signal‐to‐noise ratios were obtained in the 0.1 to 1.0 mM range. This method was applied to fingerprinting astaxanthin esters in a crude H. pluvialis extract. Prior to MALDI‐TOF/TOF‐MS, the extract was fractionated by normal phase Flash chromatography to obtain fractions enriched in mono‐ and diesters and to remove pheophytin a, which compromised monoester signals. All 12 types of all‐trans esterified esters found in LC were identified with MALDI‐TOF/TOF‐MS, with the exception of two minor monoesters. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of surface roughness and chemical composition on the wetting properties of silicon-based substrates

The article reports on the wetting properties of silicon-based materials as a function of their roughness and chemical composition. The investigated surfaces consist of hydrogen-terminated and chemically modified atomically flat crystalline silicon, porous silicon and silicon nanowires. The hydrogenated surfaces are functionalized with 1-octadecene or undecylenic acid under thermal conditions. The changes occurring upon surface functionalization are characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) spectroscopy and water contact angle measurements. By increasing the surface roughness, the static water contact angle increases. The combination of high surface roughness with chemical functionalization with water repellent coating (1-octadecene) enables reaching superhydrophobicity (water contact angle greater than 150°) for silicon nanowires.     

Single molecule study of DNA collision with elliptical nanoposts conveyed by hydrodynamics

Periodic arrays of micro‐ or nanopillars constitute solid‐state matrices with excellent properties for DNA size separation. Nanofabrication technologies offer many solutions to tailor the geometry of obstacle arrays, yet most studies have been conducted with cylinders arranged in hexagonal lattices. In this report, we investigate the dynamics of single DNA collision with elliptical nanoposts using hydrodynamic actuation. Our data show that the asymmetry of the obstacles has minor effect on unhooking dynamics, and thus confirm recent predictions obtained by Brownian dynamics simulations. In addition, we show that the disengagement dynamics are correctly predicted by models of electrophoresis, and propose that this consistency is associated to the confinement in slit‐like channels. We finally conclude that elliptical posts are expected to marginally improve the performances of separation devices.     

Direct Evidence for Intermolecular Oxidative Addition of σ(SiSi) Bonds to Gold

Oxidative addition plays a major role in transition‐metal catalysis, but this elementary step remains very elusive in gold chemistry. It is now revealed that in the presence of GaCl₃, phosphine gold chlorides promote the oxidative addition of disilanes at low temperature. The ensuing bis(silyl) gold(III) complexes were characterized by quantitative ³¹P and ²⁹Si NMR spectroscopy. Their structures (distorted Y shape) and the reaction profile of σ(Si? Si) bond activation were analyzed by DFT calculations. These results provide evidence for the intermolecular oxidative addition of σ(Si? Si) bonds to gold and open promising perspectives for the development of new gold‐catalyzed redox transformations.     

Tailoring the Structure of Two‐Dimensional Self‐Assembled Nanoarchitectures Based on NiII–Salen Building Blocks

The synthesis of a series of Ni^II–salen‐based complexes with the general formula of [Ni(H₂L)] (H₄L=R²‐N,N′‐bis[R¹‐5‐(4′‐benzoic acid)salicylidene]; H₄L1: R²=2,3‐diamino‐2,3‐dimethylbutane and R¹=H; H₄L2: R²=1,2‐diaminoethane and R¹=tert‐butyl and H₄L3: R²=1,2‐diaminobenzene and R¹=tert‐butyl) is presented. Their electronic structure and self‐assembly was studied. The organic ligands of the salen complexes are functionalized with peripheral carboxylic groups for driving molecular self‐assembly through hydrogen bonding. In addition, other substituents, that is, tert‐butyl and diamine bridges (2,3‐diamino‐2,3‐dimethylbutane, 1,2‐diaminobenzene or 1,2‐diaminoethane), were used to tune the two‐dimensional (2D) packing of these building blocks. Density functional theory (DFT) calculations reveal that the spatial distribution of the LUMOs is affected by these substituents, in contrast with the HOMOs, which remain unchanged. Scanning tunneling microscopy (STM) shows that the three complexes self‐assemble into three different 2D nanoarchitectures at the solid–liquid interface on graphite. Two structures are porous and one is close‐packed. These structures are stabilized by hydrogen bonds in one dimension, while the 2D interaction is governed by van der Waals forces and is tuned by the nature of the substituents, as confirmed by theoretical calculations. As expected, the total dipolar moment is minimized     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

Cyclodimerization versus Polymerization of Methyl Methacrylate Induced by N‐Heterocyclic Carbenes: A Combined Experimental and Theoretical Study

The activation behavior of two N‐heterocyclic carbenes (NHCs), namely, 1,3‐bis(isopropyl)imidazol‐2‐ylidene(NHCiPr) and 1,3‐bis(tert‐butyl) imidazol‐2‐ylidene (NHCtBu), as organic nucleophiles in the reaction with methyl methacrylate (MMA) is described. NHCtBu allows the polymerization of MMA in DMF at room temperature and in toluene at 50 °C, whereas NHCiPr reacts with two molecules of MMA, forming an unprecedented imidazolium–enolate cyclodimer (NHCiPr/MMA=1:2). It is proposed that the reaction mechanism occurs by initial 1,4‐nucleophilic addition of NHCiPr to MMA, generating a zwitterionic enolate 2 , followed by addition of 2 to a second MMA molecule, forming a linear imidazolium–enolate 3 (NHCiPr/MMA=1:2). Proton transfer, generating intermediate 5 , followed by cyclization and release of methanol yielded the aforementioned zwitterionic cyclodimer 1:2 adduct 7 , the molecular structure of which has been established by NMR spectroscopy, X‐ray diffraction, and mass spectrometry. This unexpected difference between NHCtBu and NHCiPr in the reaction with MMA (polymerization and cyclodimerization, respectively) can be rationalized by using DFT calculations. In particular, the nature of the NHC strongly influences the cyclodimerization pathway, the cyclization of 5 and the release of methanol are the discriminating step and limiting step, respectively. In the case of NHCtBu, both steps are strongly disfavoured compared with that of NHCiPr (energetic difference of around 14 and 9 kcal mol^?1, respectively), preventing the cyclization mechanism from a kinetic viewpoint. Moreover, addition of a third molecule of MMA in the polymerization pathway results in a lower activation barrier than that of the limiting step in the cyclodimerization pathway (difference of around 14 kcal mol^?1), in agreement with the formation of polymethyl methacrylate (PMMA) by using NHCtBu as nucleophile.     

Tuning the Reactivity of a Heterogeneous Catalyst using N-Heterocyclic Carbene Ligands for C−H Activation Reactions

We report the dramatic impact of the addition of N-heterocyclic carbenes (NHCs) on the reactivity and selectivity of heterogeneous Ru catalysts in the context of C−H activation reactions. Using a simple and robust method, we prepared a series of new air-stable catalysts starting from commercially available Ru on carbon (Ru/C) and differently substituted NHCs. Associated with C−H deuteration processes, depending on Ru/C-NHC ratios, the chemical outcome can be controlled to a large extent. Indeed, tuning the reactivity of the Ru catalyst with NHC enabled: 1) increased chemoselectivity and the regioselectivity for the deuteration of alcohols in organic media; 2) the synthesis of fragile pharmaceutically relevant deuterated heterocycles (azine, purine) that are otherwise completely reduced using unmodified commercial catalysts; 3) the discovery of a novel reactivity for such heterogeneous Ru catalysts, namely the selective C-1 deuteration of aldehydes.     

Photocontrolled Release of the Anticancer Drug Chlorambucil with Caged Harmonic Nanoparticles

While chemotherapy is one of the most used treatments in oncology, the systemic administration of chemotherapeutics generally results in undesired damages to healthy tissues and cells, side effects such as severe nausea and leukopenia, and reduced efficacy due to multidrug resistance and poor target accessibility. The limitations of conventional chemotherapy formulation have prompted the development of alternative nanomaterials-based strategies to achieve targeted and stimuli sensitive payload delivery to reach optimal local drug concentration at tumor sites. In this study, the anticancer drug chlorambucil (Clb) was conjugated to the surface of silica coated lithium niobate (LNO) harmonic nanoparticles (HNPs) using a photocaging tether based on coumarin-4-yl methyl derivative. Upon laser pulsed femtosecond irradiation at 790 nm, the second harmonic emission from the metal oxide core induced the efficient release of Clb, with concomitant contribution from the nonlinear absorption of the coumarin (CM)-based moiety.