Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.     

A phosphate-based epoxy resin for flame retardance: synthesis, characterization, and cure properties

A phosphorus-containing oligomer, bis(3-hydroxyphenyl) phenyl phosphate (BHPP), was synthesized through the reaction of phenyl dichlorophosphate and 1,3-dihydroxybenzene, and characterized by elemental analysis, Fourier transform IR spectroscopy, and ¹H NMR and ³¹P NMR spectroscopy. Consequently, the phosphate-based epoxy resins with a phosphorus content of 1 and 2 wt % were prepared via the reaction of diglycidyl ether of bisphenol-A with BHPP and bisphenol-A, and were confirmed with Fourier transform IR spectroscopy and gel permeation chromatography. Phenolic melamine, Novolak, and dicyanodiamide were used as curing agents to prepare the thermoset resins with the control and the phosphate-based epoxy resins. Thermal properties and thermal degradation behavior of these thermoset resins were investigated by using differential scanning calorimetry and thermogravimetric analysis. The thermoset resins cured with phenolic melamine exhibited higher glass-transition temperatures than the other cured resins owing to the high rigidity of their molecular chain. Thermogravimetric analysis studies demonstrated that the decomposition temperatures of the thermoset resins cured with Novolak were higher than those of the others. A synergistic effect from the combination of the phosphate-based epoxy resin and the nitrogen-containing curing agent can result in a great improvement of the flame retardance for their thermoset resins.     

Sorption of Th(IV) ions onto TiO2: Effects of contact time, ionic strength, thorium concentration and phosphate

Summary The sorption of Th(IV) onto TiO₂ was studied by the batch technique as a function of pH and ionic strength at moderate concentration (10^-4-10^-5 mol/l) and in the presence and absence of phosphate. It was found that the sorption rate of Th(IV) was relatively slow, the sorption percent was abruptly increased from pH 2 to 4, and the sorption was decreased with increasing ionic strength as a whole. In the concentration range of Th(IV) from trace concentration to 1.4 ^. 10^-4 mol/l and in the absence of phosphate, the sorption isotherms were roughly fitted the Freundlich equation at different ionic strengths and approximately constant pH. These sorption characteristics of Th(IV) onto TiO₂ were compared with those of uranyl on the same sorbent. In addition, the positive effect of phosphate on the sorption of Th(IV) onto TiO₂ was demonstrated obviously and can be attributed to strong surface binding of phosphate, and the subsequent formation of ternary surface complexes of Th(IV). The difference between the sorption characteristics of Th(IV) ions and uranyl ions onto TiO₂ is discussed.     

Two-Dimensional Supramolecular from the Self-Assembly of Dissymmetrical Oxamidato-Bridged Heterometallic Trinuclear Building Blocks: Synthesis, Crystal Structure, and Magnetic Properties

Two heterometallic trinuclear complexes {[Cu(oxbp)]₂Co(H₂O)₂}1.5DMF0.5H₂O (complex 1) and {[Cu(oxbm)]₂Co(H₂O)₂}2DMF (complex 2) were obtained from the self-organization of two new dissymmetrical oxamidato-bridged copper(II) building blocks [Cu(oxbp)]^– and [Cu(oxbm)]^–[H₃oxbp=N-benzoato-N'-(3-aminopropyl)oxamido, H₃oxbm=N-benzoato-N'-(2-amino-2-methylethyl)oxamido, DMF=dimethylformamide]. The crystal structure of complex 1 has been determined. Complex 1 crystallize in triclinic system, space group P-1, a=8.0609(16) Å, b=10.661(2) Å, c=22.279(5) Å, =85.32(3), =86.64(3), =70.90(3), and Z=1. The crystal structure of complex 1 consists of neutral trinuclear complex units, and hydrogen bond involved DMF and water molecules. Through the hydrogen bonds, weak coordination and CuCu weak interactions, complex 1 features a 2-D supramolecular structure. Magnetic susceptibility measurements (5–100 K) indicate that the central Co(II) and terminal copper metal ions are antiferromagnetically coupled with J=–28.09 and J=–29.70 cm^–1 for complex 1 and 2, respectively.     

旋转薄层色谱分离聚合物

报道了旋转薄层色谱分级聚合物，及配合直接扫描密度法测定分子量分布的结果．在旋转薄层硅胶板上用混合溶剂成功地分离并直接收集了聚苯乙烯２１个级分，分子量测定结果与ＧＰＣ法基本一致．初步认为旋转薄层色谱以薄层吸附色谱分离机理为基础，采用连续注入流动相和旋转薄层板离心力相结合的方式，改善并加快了分离效果     

加氢处理催化剂载体中Y型分子筛组分对催化剂表面性质和催化性能的影响

应用ＸＲＤ，ＸＰＳ，ＩＲ－ＴＰＤ，ＣＯ２和ＮＯ吸附及正庚烷裂解和噻吩加氢脱硫脉冲微反等方法，研究了加氢处理催化剂载体经Ｙ型分子筛改性前后各种性质的变化，结果表明，载体经Ｙ型分子筛改性后，催化剂的Ｂ酸、正庚烷裂解活性和异构选择性明显提高，Ｙ型分子筛以分散的形式分布于γ－Ａｌ２Ｏ３表面，减少了载体表面的空位铝，该催化剂中有盯当一部分金属组分进入Ｙ型分子筛孔道与３其Ｂ酸位作用，与ＮｉＱ／γＡｌ２Ｏ３相比     

Fluorescent probes for detection of biothiols based on “aromatic nucleophilic substitution-rearrangement” mechanism

“Aromatic nucleophilic substitution-rearrangement (SNAr-rearrangement)” mechanism provided a powerful tool to design fluorescent probes for the discrimination between biothiols.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Application of AMS <Superscript>14</Superscript>C measurements to criminal investigations

¹⁴C variations of atmospheric CO₂ as well as carbonaceous fraction of living materials, such as collagen from tooth and bone, tissue, skin, hair, nail, etc., of modern humans are influenced by ¹⁴C produced artificially by nuclear bomb tests in the atmosphere from late 1950s to early 1960s. By careful investigation of ¹⁴C concentration of tree rings and human body samples formed in this time intervals, we can establish a relationship of their ¹⁴C concentrations with calendar year. By applying this relation to a sample whose ¹⁴C concentration can be measured, we can estimate the formation age of the sample. In addition, sources of the chemicals that were used in some criminal cases can be possibly identified, by their carbon isotope ratios (¹³C/¹²C and ¹⁴C/¹²C). This method of age determination has been applied to a forensic study, i.e., two criminal cases of murder. For each case, by comparing the measured ¹⁴C abundances of several pieces of hair and one tooth (the third molar) from the body with the annual change on concentrations of bomb-produced ¹⁴C, the time of death of the body and the age of the victim were estimated. The estimated values were consistent with the real ones that were revealed by the confession of the real murderers.     

Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.