The application of lightning forecasting based on surface electrostatic field observations and radar data

This paper presents an analysis of lightning forecasting based on atmospheric electrostatic field (EF), radar and lightning location data in Nanjing of China. The warning behavior with EF data in summer of 2009 was analyzed and the suitable EF warning indexes were determined. To improve EF warnings effect, a method of cloud-ground (CG) lightning nowcasting based on EF observations, radar data, etc. was proposed and the best radar forecasting index was selected in the paper. The experimental (2009) and independent test (2010) results show that POD is 82.7%, FAR is 14.6%, CSI is 72.4% and average lead time is 20.8 min.     

The structure-tunable synthesis and magnetic properties of Fe3O4 nanocrystals

Magnetite nanocrystals with tunable crystalline structures (orthorhombic and cubic) were synthesized via a simple oxidation-coprecipitation approach basing on the reaction of FeSO₄·7H₂O with C₆H₁₂N₄. The average diameter of prepared orthorhombic Fe₃O₄ nanorods were 15 nm while their lengths were approximately 150~200 nm. As-prepared cubic counterparts were composed of 10 nm sized nanoparticles. XRD, FESEM, TEM, SAED and HRTEM were then used to characterize our samples. In addition, magnetic measurements showed the saturation magnetization of orthorhombic magnetite was lower than that of cubic ones. Mössbauer spectroscopy verified the samples possessed the nature of cubic magnetite. Finally, a possible growth mechanism for orthorhombic nanorods and cubic nanoparticles was also discussed.     

Analysis of the mechanisms of electron recombination in HgCdTe infrared photodiode

This paper presents an experimental study of minority carrier lifetime and recombination mechanisms in HgCdTe photodiode. The excitation light source is a wavelength-tunable pulsed infrared laser. A constant background illumination has been introduced to minimize the effect of the junction equivalent capacitor and resistance. The decay of the photo-generated voltage is recorded by a storage oscilloscope. By fitting the exponentially decay curve, the time constant has been obtained which is regarded as the photo-generated minority carrier lifetime of the HgCdTe photodiode. The experimental results show that the carrier lifetime is in the range of 18–407 ns at 77 K for the measured detectors of four Cd compositions. It was found that the Auger recombination process is more effective for low Cd composition while the radiative recombination process became more important for high composition materials. The Shockley–Read–Hall recombination processes could not be ignored for all Cd composition.     

Ranking spreaders by decomposing complex networks

Ranking the nodes? ability of spreading in networks is crucial for designing efficient strategies to hinder spreading in the case of diseases or accelerate spreading in the case of information dissemination. In the well-known k-shell method, nodes are ranked only according to the links between the remaining nodes (residual links) while the links connecting to the removed nodes (exhausted links) are entirely ignored. In this Letter, we propose a mixed degree decomposition (MDD) procedure in which both the residual degree and the exhausted degree are considered. By simulating the epidemic spreading process on real networks, we show that the MDD method can outperform the k-shell and degree methods in ranking spreaders.     

Spectroscopic Properties of Cu(L-met)2, Cu(DL-met)2, Cu(L-ala)2 and Cu(DL-ala)2˙H2O and Qualitative Explanations to the Magnetism and Relative Ordering of the One-Electron Energy Levels.

Electronic absorption spectra and photoacoustic spectra of four copper(II)-amino acid complexes of formulas Cu(L-met)˙(1). Cu(DL-met)˙(2). Cu(L-ala)x(3) and Cu(DL-ala)˙-H₂O(4)(L-met=L-methioninato;DL-met=DL-methioninato;L-ala=L-alaninato DL-ala=DL-alaninato) were recorded and the results are discussed quantitatively with respect to llgand field theory and the radical wave function of a non-free copper(II) ion. The relationship between the maximum absorption peak in PAS and magnetic properties is also discussed. Lastly, a qualitative explanation on the senquence of splitting energy in going from regular octahedral to strongly elongately and slightly tetragonally distorted octahedral around each copper(II) center is proposed.     

Thermal and Thermo-Oxidative Degradation of Biodegradable Poly(Ester Urethane) Containing Poly(L-Lactic Acid) and Poly(Butylene Succinate) Blocks

A novel biodegradable poly(ester urethane; PEU) was synthesized by chain extension reaction of dihydroxylated poly(L-lactic acid; PLLA) and poly(butylene succinate; PBS) using diisocyanate as a chain extender. The kinetics of thermal and thermo-oxidative degradation of PEU containing PLLA and PBS blocks were studied by thermogravimetric analysis (TGA). TGA results indicated that PEU was more stable in air than in nitrogen and went through a two-stage degradation process irrespective of the experimental atmosphere. Activation energy of each stage was calculated by means of Kissinger, Kim-Park, Friedman, Flynn-Wall-Ozawa, and Kissinger-Akahira-Sunose methods. For the first stage, the activation energy value obtained in air was slightly higher than the corresponding value obtained in nitrogen; and for the second stage, the activation energy showed a much higher value in air than in nitrogen. The Coats-Redfern method was employed to study the degradation mechanism of each stage. The results indicated that the degradation of the first stage follows the P3/4 mechanism irrespective of the experimental atmosphere; the degradation of the second stage of PEU obeys the P1 mechanism in nitrogen while P3/2 in air.     

Preparation and Properties of Polyethylene Terephthalate (PET)/Near Infrared Reflective Pigment (NIR) Composites

A near infrared reflective (NIR, nickel antimony titanium yellow rutile) pigment filler was incorporated into a polyethylene terephthalate (PET) matrix via a melt blending approach to increase the infrared reflection of PET and limit the thermal heat accumulation in light of environmental and energy conservation concerns. Two different types of surface modifiers, polyethylene glycol (PEG) and cetyltrimethylammonium bromide (CTAB), were used to modify the NIR surface, as NIR–PEG and NIR–CTAB fillers, to investigate the surface modification effect. Fourier transform infrared spectroscopy (FTIR), a Zetasizer, and electron spectroscopy for chemical analysis (ESCA) results suggested a successful adsorption of the organic modifiers onto the NIR surface. Thermogravimetric analysis indicated a higher adsorption degree for the CTAB modifier than the PEG modifier due to the electronic interaction between CTAB and NIR. The thermal crystallization temperature (T_c) for neat NIR-filled samples decreased with increasing NIR content within the PET matrix at first, up to 9°C, but then tended to increase again up to a measurable difference of 6°C with respect to pure PEG, indicating the promotion of the crystallization kinetics of the neat NIR within the PET matrix. On the other hand, a decrease in T_c for all NIR-CTAB or NIR-PEG loadings was found, with the depression close to 10°C for all NIR-CTAB samples regardless of the loading. CTAB modified NIR gave the highest improvement in tensile strength and strain at break in comparison with NIR and NIR-PEG filled samples. The near infrared reflection values of modified PET were higher than those of neat PET. The reflection values appeared to be the highest for some concentrations of the NIR-CTAB filled samples, but were of similar orders of magnitude with those for NIR or NIR-PEG filled samples.     

Stochastic optimization for power system configuration with renewable energy in remote areas

This paper presents a stochastic mixed integer programming model for a comprehensive hybrid power system design problem, including renewable energy generation, storage device, transmission network, and thermal generators, for remote areas. Given the complexity of the model, we developed a Benders’ decomposition algorithm with two additional types of cutting planes: Pareto-optimal cuts generated using a modified Magnanti-Wong method and cuts generated from a maximum feasible subsystem. Computational results show significant improvement in our ability to solve this type of problem in comparison to a state-of-the-art professional solver. This model and the solution algorithm provide an analytical decision support tool for the hybrid power system design problem.     

Filtering with Marked Point Process Observations via Poisson Chaos Expansion

We study a general filtering problem with marked point process observations. The motivation comes from modeling financial ultra-high frequency data. First, we rigorously derive the unnormalized filtering equation with marked point process observations under mild assumptions, especially relaxing the bounded condition of stochastic intensity. Then, we derive the Poisson chaos expansion for the unnormalized filter. Based on the chaos expansion, we establish the uniqueness of solutions of the unnormalized filtering equation. Moreover, we derive the Poisson chaos expansion for the unnormalized filter density under additional conditions. To explore the computational advantage, we further construct a new consistent recursive numerical scheme based on the truncation of the chaos density expansion for a simple case. The new algorithm divides the computations into those containing solely system coefficients and those including the observations, and assign the former off-line.     

Real Valuations and Orderings on a Module

The purpose of this article is to introduce the notion of real valuations on modules over commutative rings. These real valuations are characterized by their associated valuation triples, and a necessary and sufficient condition for a module to possess a real valuation is established. Moreover, the close interplay between valuations and orderings on a module is investigated by introducing the compatibility of valuations with orderings. Via the compatibility of valuations with orderings, the reality of valuations on a module also is characterized.