Electrochemical studies of the effect of lanthanide ions on the activity of glutamate dehydrogenase

Using the electrochemical method based on the "diffusion" layer concept of the convective system, the effect of lanthanide ions La3+ and Eu3+ on the activity of glutamate dehydrogenase (GLDH) has been determined. In suitable concentrations, the lanthanide ions La3+ and Eu3+ can activate the GLDH in the reductive amination of alpha-Ketoglutarate (alpha-KG). The activation mechanism would be that the lanthanide ions could interrupt the binding of NAD+ to GLDH by combining preferentially to NAD+. This mechanism was proposed by the voltammetric studies.     

Effects of Hydrogen and Hydrogen Sulfide on Cumene Cracking Catalyzed by Pt/WO3-ZrO2. Control of Acidic and Metallic Functions

Synthesis of alumina aerogels was carried out by hydrolysis of aluminium isopropanolate and butanolate in benzene, methanol and isopropanol solutions as components of support precursors followed by gelation, drying under supercritical conditions and calcination. The influence of the type of precursor and solvent, synthesis temperature as well as drying and calcination temperature on bulk density, specific surface area and total pore volume was investigated.     

火焰原子吸收分光光度法测定维血康颗粒中总铁

建立火焰原子吸收分光光度法测定维血康颗粒中总铁的含量,火焰类型选择空气–乙炔,测定波长为248.3 nm,测定时间为4.0 s,燃气流量为0.9 L/min,以氘灯作为背景校正。铁的质量浓度在2.4~28.8μg/mL范围内与吸光度呈良好的线性,线性相关系数r~2=0.999 8。6次测定结果的相对标准偏差小于1.0%,样品加样回收率为93.89%,方法检出限为0.011 3μg/mL。该方法具有准确度高,稳定性、重复性好等优点,可用于维血康颗粒中总铁含量的测定。     

CO_2捕集炭膜的前驱体结构设计及性能

从分子结构设计出发,合成了一系列新型刚性、高自由体积的聚酰亚胺炭膜前驱体,并制备了炭膜.采用热重分析(TGA)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和高分辨透射电子显微镜(HRTEM)研究了不同聚酰亚胺前驱体的热分解特性及在热解炭化过程中化学结构、微结构的变化规律;测试了所制备炭膜的气体分离性能.结果表明,前驱体的自由体积分数显著影响炭膜的气体分离性能;聚合物结构越具刚性,自由体积越大,所得炭膜结构越疏松,极微孔道尺寸越大,越有利于气体分子在炭膜极微孔道中的渗透、扩散与传输.其中,刚性大体积基团芴基、酚酞cardo基团和六氟异丙基的引入能有效破坏分子链间的堆积,提高聚合物的自由体积,所形成炭膜的结构较疏松,均表现出优异的气体渗透性和分离选择性,超越了Robeson上限,解决了传统炭膜气体渗透性能低的问题.特别是采用羟基官能化聚酰亚胺前驱体制备的炭膜在保持较高气体分离选择性的同时,CO_2气体的渗透性高达24770 Barrer(1 Barrer≈7.5×10-18m2·s-1·Pa-1),可实现对CO_2的有效分离和捕集,展现出良好的商业化应用前景.     

可瓷化硅橡胶材料的研究

研究了一种可瓷化硅橡胶,其特点是在火灾发生时可在金属线外形成瓷化绝缘保护层,600℃的成瓷温度大幅度低于目前文献报道的成瓷温度。实验得到的优化瓷化填料配方为:相对于100份混炼胶,氧化铝10份、硅灰石15份、结构控制剂9份、碳酸锂3份。在此配方条件下,未瓷化硅橡胶的断裂伸长率316%、拉伸强度10.79MPa、体积电阻率134×10~(12)Ω·cm,其在600℃、800℃瓷化后的抗压强度分别为3.47MPa、10.13MPa、体积电阻率≥28×10~(12)Ω·cm,满足电缆用硅橡胶的力学和绝缘要求。经热重分析及SEM分析可知加入瓷化填料后,试样烧蚀重量减少了39.4%,烧蚀残留率大大提高,且成瓷试样结构致密。     

结合可见光促进氧化还原和镍催化的碳碳键合成进展

结合可见光促进氧化还原和镍催化的碳碳键合成研究,是对过渡金属催化的交叉偶联反应的重要补充,具有广阔的发展空间和应用前景,是近年来有机光化学合成的前沿热点领域之一。本文依据反应设计的模式划分,小结目前该领域的研究进展。     

Low Temperature Catalytic Hydrolysis of Carbon Disulfide on Activated Carbon Fibers Modified by Non-thermal Plasma

In order to improve the carbon disulfide (CS₂) catalytic hydrolysis efficiency of activated carbon fibers (ACFs), ACFs surface was modified by non-thermal plasma (NTP). In particular, the effects of modification conditions on the catalyst properties were studied, including the reactor structure, modification atmosphere, modification time, output voltage and discharge gap. The catalytic activity study showed that ACFs with NTP modification enhanced CS₂ catalytic hydrolysis. The optimal reactor structure, modification atmosphere, modification time, output voltage and discharge gap was a coaxial cylinder, an N₂ atmosphere, 5 min, 7 kV and 7.5 mm, respectively. The effect of the NTP modification on the micro-structural properties of the ACFs was characterized using scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and X-ray photoelectron spectroscopy (XPS) methods. The results showed that NTP modification improved the dispersion of functional groups and increased the number of oxygen-containing and nitrogen-containing functional groups, thus the catalytic activity could be enhanced. The present results indicated that NTP modification was an effective way to manipulate ACFs surface properties for the CS₂ catalytic hydrolysis reaction.     

Effects of precipitants and surfactants on catalytic activity of Pd/CeO<Subscript>2</Subscript> for CO oxidation

A series of precipitants and commercial surfactants (soft templates) were employed to synthesize mesoporous/nano CeO₂ by a hydrothermal method. As-prepared CeO₂ was impregnated with palladium and employed for low-temperature catalytic oxidation of CO. It was found that both soft templates and precipitants had significant effects on the morphology, particle size, crystallinity, and porous structure of the CeO₂, having a significant effect on the surface palladium abundance, molar ratios of surface species, and catalytic activity of the final impregnated Pd/CeO₂. Using ammonia as precipitant could facilitate increased surface palladium abundance and surface molar ratios of PdO/Pd _SMSI , Ce³⁺/(Ce³⁺ + Ce⁴⁺), and O_surface/O_lattice. The catalytic activity of the final Pd/CeO₂ catalysts could be enhanced as well. The optimal P123-assisted ammonia-precipitated Pd/CeO₂ catalyst exhibited over 99% catalytic conversion of CO at 50 °C.