光声量热法测定辅酶B12的光解量子产率

时间可分辨的光声最热法（Time－resolvedphotoacousticcalorimetry；简称PAC）是研究脉冲激光诱发的快速光化学和光生物化学反应过程动力学和热力学信息的一种有效方法[1－5]。本文采用压电陶瓷圆管同时作为样品油和换能器组成的PAC探测系统[6]，以波长λ＝355nm的脉冲激光（脉冲宽度8ns，脉冲重复频率10Hz）为光源激发辅酶B12甲醇溶液；研究其解量子产率，获得了满意的结果．1实验被测溶液注入两端用石英玻璃封口的压电陶瓷圆管内腔，激光束透过石英窗照射溶液（如图］所示）为标定被测样品的非辐射放热量，利用能在极短的时间内（＜l…     

GC/MS SIM法快速测定酒中的游离脂肪酸

本文介绍一种简单、快速、灵敏、直接分析酒中游离脂肪酸的测定方法。用涂有OV-17熔融石英毛细管柱。选择游离脂肪酸质谱图中的基峰离子m/z 60进行SIM检测。定量测定了茅台酒、珍酒及鸭溪窖酒中十二种游离脂肪酸。     

压缩X因子导数光谱法测定痕量锗

本采用压缩Ｘ因子导数光谱技术实现了宽峰体系灵敏度的大幅度提高，提出了测定痕量锗的方法。在０．７２ｍｏｌ／ＬＨ２ＳＯ４和３．０ｍｏｌ／ＬＨ３ＰＯ４的混酸介质中，锗－水杨基荧光酮－ＯＰ三元显色体系的压缩Ｘ因子四阶导数光谱摩尔响应系数达１．８９×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度比常规光度法高１２．４倍；最低检测出限为０．０００３３ｍｇ／Ｌ，比常规光谱法低４倍；选择性也进一步提高，绝大多数离     

冠醚配合物的研究XV.若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应

本文运用微量电导滴定及计算机拟合技术，研究了若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应，测定了配合物的组成及稳定常数，并对实验结果进行了讨论。     

New Quaternary Chalcogenides BaLnMQ3 (Ln = Rare Earth or Sc; M = Cu, Ag; Q= S, Se): II. Structure and Property Variation vs Rare-Earth Element

Some new quaternary compounds of the type BaLnMQ₃ (Ln = rare earth or Sc; M = Cu, Ag; Q = S, Se) have been synthesized by the reaction of the constituent binary chalcogenides and elements at 1000°C. The crystal structures of two of these compounds have been determined by single-crystal X-ray diffraction techniques and are isostructural. Crystal data: BaErCuS₃—space group D¹⁷_2h —Cmcm, M= 464.32, Z = 4 , a = 3.987(1), b = 13.377(3), c = 10.101(2) Å (T = 115 K), V = 538.7(4) ų, R_w (F²) = 0.095 for 848 observations and 24 variables, R(F) = 0.037 for 840 observations having F²₀ > 2σ (F²₀); BaYAgSe—space group D¹⁷_2h —Cmcm, M = 571.0, Z = 4, a = 4.239(1), b = 14.030(2), c = 10.636(2) Å (T = 115 K), V = 632.6(2) ų, R_w (F²) = 0.057 for 645 observations and 24 variables, R(F) = 0.023 for 595 observations having F²₀ > 2σ(F²₀). These two compounds adopt the layered KZrCuS₃ structure type. The layers, which are separated by Ba²⁺ ions, consist of edge-sharing octahedral chains and corner-sharing tetrahedral chains. The other compounds synthesized crystallize either with this same structure or with that of β-BaLaCuSe₃, a slightly distorted variation, which is isostructural with Eu₂CuS₃. The diffuse reflective UV-visible spectra of several of these compounds have been measured. From magnetic susceptibility measurements, both BaNdCuS₃ and BaGdCuS₃ show Curie-Weiss behavior, whereas BaCeCuS₃ and BaCeCuSe₃ show in addition temperature-independent paramagnetism.     

Keggin型杂多酸在镀锌钝化中的应用

比较了H_4SiMo_(12)O_(40)、H_3PW_(12)O_(40)、H_4SiW_(12)O_(40)、H_3PMo_(12)O_(40)及铬酸盐对镀锌层钝化效果。H_3PMo_(12)O_(40)钝化的最佳条件为:H_3PMo_(12)O_(40)5g/L,pH 1.1,钝化时间35秒,温度15℃,空留时间10秒,封闭温度100℃(水)。经扫描电镜、XPS、AES、IR和Raman光谱等测定,表明在锌表面形成了一种含有P、Mo、O及Zn的耐蚀性膜。其中钼以Mo(Ⅵ)、Mo(Ⅴ)和Mo(Ⅳ)存在,P/Mo比为1:3.0。推测锌表面形成了一种形如Zn_x(PMo_3)_rO_z/ZnO/Zn的复杂钝化膜。     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

金属铜升温熔化过程的分子动力学模拟

采用分子动力学方法模拟了金属铜的升温熔化过程.原子间作用势采用FS (Finnis-Sinclair)势，结构分析采用双体分布函数(PCF)、均方位移(MSD)等方法.计算结果表明,在连续升温过程中，金属铜在1444 K熔化，在该熔化点的扩散系数为4.31×10－9 m2•s－1.上述结论与实验值相当接近，并且比之采用EAM镶嵌原子势所作模拟得到的结果更佳，说明FS势可以用来处理象液铜这样较复杂的无序体系.本文指出了升温速率在金属熔化过程中所起的作用.     

Synthesis, crystal structure and properties of K2Ta2S10: A novel ternary tantalum polysulfide with TaS8 polyhedra forming infinite anionic chains

The new ternary alkali tantalum polysulfide K₂Ta₂S₁₀ has been synthesized by reacting TaS₂ with an in situ formed melt of K₂S₃ and S at 773 K. The compound crystallizes with four formula units in the monoclinic space group P2₁/n (No. 14) with lattice parameters of . The structure contains two different zigzag chain anions [TaS₅]⁻, running parallel to the crystallographic b-axis separated by potassium cations. The two crystallographically independent tantalum atoms are in a distorted bi-capped trigonal prismatic environment of eight sulfur atoms which was never observed before. The TaS₈ polyhedra share three S atoms on each side to form the anionic chains. The compound was characterized with FIR and Raman spectroscopy.