新型磺酸功能化吡啶盐酸盐离子液体催化剂用于六氢喹啉合成(英文)

Sulfonic acid functionalized pyridinium chloride [pyridine-SO3 H]Cl has been synthesized as a novel Brnsted acidic ionic liquid and characterized on the basis of its FT-IR,1H and 13C NMR,MS,ther-mogravimetry,and derivative thermogravimetry data.The material has also been used as a highly efficient,homogeneous,and reusable catalyst for the preparation of hexahydroquinolines according to the one-pot multi-component condensation of arylaldehydes,dimedone(5,5-dimethylcyclohexane-1,3-dione),β-ketoesters,and ammonium acetate under solvent-free conditions.     

Miniaturized instrumentation for field applications: general considerations for environmental sensor networks

Various aspects of chemical instrument miniaturizing are explored. The limitations imposed by scaling laws are discussed, and the influences of system dynamics on chemical and physical behaviour of molecules in microsystems are presented. The complexity of chemical systems, as defined by intra- and intermolecular forces, influencing minimum device dimensions is illustrated for solution and gas-phase species. The basic concepts for environmental sensor networks are presented for a hypothetical system.     

An inorganic–organic hybrid material based on ZnO nanoparticles anchored to a composite made from polythiophene and hexagonally ordered silica for use in solid-phase fiber microextraction of PAHs

We report on an inorganic–organic hybrid nanocomposite that represents a novel kind of fiber coating for solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). The material is composed of ZnO nanoparticles, polythiophene and hexagonally ordered silica, and displays good extraction capability due to its nanostructure. The nanocomposite was synthesized by an in-situ polymerization technique, and the ZnO nanoparticles were anchored to the pores in the walls. The ZnO/polythiophene/hexagonally ordered silica (ZnO/PT/SBA-15) nanocomposite was then deposited on a stainless steel wire to obtain the fiber for SPME of PAHs. Optimum conditions include an extraction temperature of 85 °C (for 30 min only), a desorption temperature of 260 °C (for 2 min), and a salt concentration (NaCl) of 20 % (w/v). The detection limits are between 8.2 and 20 pg mL^?1, and the linear responses extend from 0.1 to 10 ng mL^?1. The repeatability for one fiber (for n?=?5), expressed as relative standard deviation, is between 4.3 and 9.1 %. The method offers the advantage of being simple to use, rapid, and low-cost (in terms of equipment). The thermal stability of the fiber and high relative recovery (compared to conventional methods) represent additional attractive features.

Prediction of Rheological Properties of Multi-Component Dispersions by Using Artificial Neural Networks

This article shows the ability of artificial neural network (ANN) technology for predicting the correlation between rheological properties of multi-component food model systems and their chemical compositions. Multi-component food model systems were made of whey protein isolate (WPI) (2, 4 wt%), Iranian tragacanth gum (TG) (Astragalus gossypinus) (0.5, 1 wt%) and oleic acid (5, 10% v/v). The input parameters of the neural networks (NN) were these chemical compositions, namely WPI and TG concentrations, and oleic acid volume fractions. The output parameters of the NN models were rheological properties of multi-component food model systems (flow and consistency indices, viscosity, loss and storage moduli). Results showed that, ANN with training algorithm of back propagation (BP) was the best one for the creation of nonlinear mapping between input and output parameters. The best topology was 3-10-5. The ANN model predicted the rheological properties of multi-component food model systems with average RMSE 4.529 and average MAE 3.018. These results show that the ANN can potentially be used to estimate rheological parameters of multi-component food model systems from chemical composition. This development may have significant potential to improve product quality control and reduce time and costs by minimizing the rheological experiments.     

99% efficiency in collecting photons from a single emitter

In a previous paper [Nat. Photon. 5, 166 (2011)], we reported on a planar dielectric antenna that achieved 96% efficiency in collecting the photons emitted by a single molecule. In that work, the transition dipole moment of the molecule was set perpendicular to the antenna plane. Here, we present a theoretical extension of that scheme that reaches collection efficiencies beyond 99% for emitters with arbitrarily oriented dipole moments. Our work opens important doors in a wide range of contexts including quantum optics, quantum metrology, nanoanalytics, and biophysics. In particular, we provide antenna parameters to realize ultrabright single-photon sources in high-index materials such as semiconductor quantum dots and color centers in diamond, as well as sensitive detection of single molecules in nanofluidic devices.     

Polythiophene/hexagonally ordered silica nanocomposite coating as a solid‐phase microextraction fiber for the determination of polycyclic aromatic hydrocarbons in water

A highly porous fiber coated with polythiophene/hexagonally ordered silica nanocomposite was prepared for solid‐phase microextraction (SPME). The prepared nanomaterial was immobilized onto a stainless‐steel wire for the fabrication of the SPME fiber. Polythiophene/hexagonally ordered silica nanocomposite fibers were used for the extraction of some polycyclic aromatic hydrocarbons from water samples. The extracted analytes were transferred to the injection port of a gas chromatograph using a laboratory‐designed SPME device. The results obtained prove the ability of the polythiophene/hexagonally ordered silica material as a new fiber for the sampling of organic compounds from water samples. This behavior is due most probably to the increased surface area of the polythiophene/hexagonally ordered silica nanocomposite. A one‐at‐a‐time optimization strategy was applied for optimizing the important extraction parameters such as extraction temperature, extraction time, ionic strength, stirring rate, and desorption temperature and time. Under the optimum conditions, the LOD of the proposed method is 0.1–3 pg/mL for analysis of polycyclic aromatic hydrocarbons from aqueous samples, and the calibration graphs were linear in a concentration range of 0.001–20 ng/mL (R² > 0.990) for most of the polycyclic aromatic hydrocarbons. The single fiber repeatability and fiber‐to‐fiber reproducibility were less than 8.6 and 19.1% (n = 5), respectively.     

Synthesis and properties of urethane-modified polyimides

The synthesis and properties of thermoplastic urethane-modified polyimides, based on different isocyanates, with different concentrations of hard segments and different ratios of imide and urethane groups, were studied. The effect of catalysts, isocyanates, and temperature was investigated on model reactions leading to formation of monoimides, bisimides, and polyimides. A polymer based on 2,4-TDI, poly(oxytetramethylene) glycol of 1000 molecular weight and pyromellitic dianhydride, with 75% of imide in the hard segments, retained about 50% of the original tensile strength at 120°C and about 30% at 150°C. Increasing the temperature up to 150°C had very little effect on the elongation of this copolymer. In general, increasing the imide concentration in the polymer structure provided better retention of stress-strain properties at elevated temperatures.     

Studies in the formation of poly(oxazolidones). II. Selectivity of catalysts and kinetics in the synthesis of 2-oxazolidone from butyl isocyanate and phenylglycidyl ether

The reaction of butyl isocyanate with phenylglycidyl ether was selected as a model reaction for the synthesis of aliphatic isocyanate-based poly(2-oxazolidones). The selectivity of different metal halides and aluminum trichloride/triphenylphosphine oxide (AlCl₃ TPPO) and aluminum hexamethylphosphoramide (AlCl₃ HMPA) complexes were investigated for oxazolidone formation. Both FTIR and mass spectrographic methods were employed for characterization of the reaction products. The kinetics of the model reaction was studied using AlCl₃ TPPO in o-dichlorobenzene at 120 and 140°C.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

pH stimuli-responsive and fouling resistance PES membrane fabricated by using photochromic spiropyran and spironaphthoxazine nanofillers for pesticide removal

New fouling resistance and stimulus–responsive nanofiltration membranes were fabricated by adding photochromic spiropyran (SPO) and spironaphthoxazine (SNO) nanofillers to the polyethersulfone (PES) matrix via the phase inversion method. The effect of SPO and SNO, as novel photoresponsive molecule nanofillers, were evaluated in terms of membrane morphology, porosity, wettability, pure water flux (PWF), antifouling resistance, and stimulus–responsive properties. All the modified membranes indicated better performance compared to the bare PES. The membrane PWF was notably enhanced from 7.7 kg/m²h for the bare PES up to 18.68 and 20.58 kg/m²h for the 0.1 wt.% SPO and SNO blended membranes, respectively. Also, the 0.1 wt.% of SNO-based PES membrane indicated the best flux recovery ratio compared to the other membranes. The photo stimulus–responsive assessment showed a color change for both SPO and SNO photochromic in membranes. In the case of variable effect investigation, the response surface methodology at three levels (pressure: 4, 5, 6 bar and flow rate: 50, 100, and 150 L/h) was applied. A suitable flux (23.39 kg/m² h) and high removal efficiency (more than 90%) was achieved at optimum conditions. Also, the modified membranes by photochromic materials were sensitive to environmental variables such as acidic and alkaline conditions by changing their color.