AlCn及AlC+n(n=1-4)原子簇的理论研究

用ab initio能量解析梯度法，在UHF（RHF）／3－21G水平上优化得到AlCn，AlCn+（n＝1～3）的四十三个构型，在RHF（UHF）／3－21G水平上优化得到AlC4，AlC4+的二十六个构型，CISD能量．从能量角度所研究的AlCn，AlCn+（n=1～4）构型中，最稳定的构型均是线性构型，且Al全都在端点上，同文献报导的理论和实验结果相一致．此外，还研究了原子簇的离子化能，原子平均结合能以及原子簇的碎片化通道和碎片化能，并计算了上述最稳定构型的谐振动光谱常数．     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

密胺树脂/硼酸锌双层包覆微胶囊化红磷的制备及其在阻燃聚烯烃中的应用

描述了采用密胺树脂和硼酸锌连续双层包覆微胶囊化红磷(MRP)的最新制备方法。采用红外光谱、电子能谱和透射电镜等分析手段对其进行了表征，并证实红磷已被完全包覆。实验数据表明：经包覆的MRP的热稳定性获得了明显改善，吸水率和磷化氢的发生量均大大减少。MRP作为阻燃助剂应用于聚烯烃阻燃材料表现出了良好的阻燃效果。实时红外和热失重测量以及扫描电镜观察表明：其阻燃机制是红磷受热时与树脂反应促进了含磷膨胀炭层的形成，从而提高了材料的热稳定性，碳层起到了隔氧、隔热作用，而且主要在凝聚相中发挥其阻燃作用。     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.     

Structures, stabilities, and electronic and optical properties of c(58) fullerene isomers, ions, and metallofullerenes.

The 1205 classical isomers of fullerene C58, as well as one quasi-fullerene C58 isomer with a heptagonal ring (labeled as Cs:hept) have been investigated by the quantum chemical methods PM3, HCTH/3-21G, and B3LYP/6-31G(d). Isomer C3v:0001, which has the lowest number of adjacent pentagons, is predicted to be the most stable isomer, but the quasi-fullerene isomer Cs:hept is only 2.50 kcal mol-1 higher in energy. Systematic investigations of the electronic properties of C3v:0001 and Cs:hept find that the C3v:0001 isomer has high vertical electron affinity (3.19 eV). The nucleus-independent chemical shifts (NICS) value at the center of Cs:hept (-5.1 ppm) is more negative than that of C60 (-2.8 ppm). The NICS value at the center of the heptagonal ring in Cs:hept (-2.5 ppm) indicates weakly aromatic character. In contrast, the C58(6-) and C58(8-) ions of the C3v:0001 and Cs:hept geometries possess large aromatic character, with NICS values between -14.0 and -26.2 ppm. To clarify the thermodynamic stabilities of C58 isomers at different temperatures, the entropy contributions are taken into account on the basis of the Gibbs energy at the B3LYP/6-31G(d) level. The C3v:0001 isomer prevails in a wide range of temperatures, and the Cs:hept isomer is also an important component around 2800 K. The IR spectra of C58 isomers are simulated to facilitate experimental identification of different isomers. In addition, the electronic spectra and the second-order hyperpolarizabilities are predicted by ZINDO and the sum-over-states model. The static second-order hyperpolarizability of the C3v:0001 isomer is 96.5 % larger than that of C60, and its second-order hyperpolarizabilities at external field frequencies are at least nine times larger than those of C60.     

Diterpene derivative and chromone from Hypericum perforatum

A novel diterpene derivative, 5-methyl-5-(4,8,12-trimethyl-tridecyl)-dihydro-furan-2-one (1) and a new chromone, 5-hydroxy-7-methoxy-3-methyl-chromen-4-one (2), along with a known compound, phytol (3) have been isolated from the aerial parts of Hypericum perforatum. Their structures were established on the basis of spectroscopic analysis and by comparison with published values.     

On the Randić Index of Acyclic Conjugated Molecules

The Randić index of an organic molecule whose molecular graph is G is the sum of the weights (d(u)d(v))^−1/2 of all edges uv of G, where d(u) and d(v) are the degrees of the vertices u and v in G. We give a sharp lower bound on the Randić index of conjugated trees (trees with a perfect matching) in terms of the number of vertices. A sharp lower bound on the Randić index of trees with a given size of matching is also given Mei Lu: Partially supported by NNSFC (No. 60172005) Lian-zhu Zhang: Partially supported by NNSFC (No. 10271105) Feng Tian: Partially supported by NNSFC (No. 10431020)     

Preparation of 103Pd seeds Part II. “Molecular Plating” of 103Pd onto copper rod

A method for ¹⁰³Pd molecular plating onto the surface of the copper rod is reported. The optimal composition of the plating bath was: palladium chloride 2 g/l, ammonium hydroxide (28%) 150 ml/l, sodium hypophosphite 12 g/l, and ammonium chloride 37 g/l. The whole procedure of ¹⁰³Pd molecular plating will last 50 minutes at 40 °C. This article provides valuable experience for the preparation of ¹⁰³Pd seeds.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.