Groups of paramagnetic centres in coal samples with different carbon contents

Complex systems of paramagnetic centres existing in demineralised flame coal (71.4 wt% C), medium-rank coal (85.6 wt% C) and anthracite (94.9 wt% C) were analysed by electron paramagnetic resonance spectroscopy (EPR). Different groups of paramagnetic centres were searched in macerals (exinite, vitrinite, inertinite) of coals with carbon contents of 73.8 wt% C and 85.6 wt% C. Experimental EPR spectra were fitted by different superposition of theoretical lines. Total concentration of paramagnetic centres both in coal and macerals increases with carbon content in the sample. Total concentration of paramagnetic centres in macerals increases from exinite to inertinite. Four groups of paramagnetic centres were found in medium-rank coal, and only two groups exist in flame coal and anthracite. The EPR spectrum of medium-rank coal is a superposition of two broad and two narrow lines. Both broad and narrow, and two narrow lines were measured in EPR spectra of flame coal and anthracite, respectively. Two types of paramagnetic centres with broad lines and one group with narrow lines exist in exinite and vitrinite from medium-rank coal. Two narrow components were observed in EPR spectra of its inertinite. Two different broad electron paramagnetic resonance signals were detected for macerals from low-coalificated coal. Paramagnetic centres systems of medium-rank coal samples reveal the most complex character. Broad EPR lines were not observed for the higher coalificated samples, i.e., anthracite and inertinite from medium-rank coal. Narrow lines do not occur in EPR spectra of low-coalificated macerals. Strong dipolar interactions and fast spin-lattice relaxation processes are characteristic for paramagnetic centres with broad lines. Strong exchange interactions and short spin-lattice relaxation time were measured for paramagnetic centres with the narrowest EPR signals.     

Oxidation of some catecholamines by sodium N-chloro-p-toluenesulfonamide in acid medium: A kinetic and mechanistic approach

The kinetics of the oxidation of five catecholamines viz., dopamine (A), L-dopa (B), methyldopa (C), epinephrine (D) and norepinephrine (E) by sodium N-chloro-p-toluenesulfonamide or chloramine-T (CAT) in presence of HClO₄ was studied at 30±0.1 °C. The five reactions followed identical kinetics with a first-order dependence on [CAT] _o , fractional-order in [substrate] _o , and inverse fractional-order in [H⁺]. Under comparable experimental conditions, the rate of oxidation of catecholamines increases in the order D>E>A>B>C. The variation of ionic strength of the medium and the addition of p-toluenesulfonamide or halide ions had no significant effect on the reaction rate. The rate increased with decreasing dielectric constant of the medium. The solvent isotope effect was studied using D₂O. A Michaelis-Menten type mechanism has been suggested to explain the results. Equilibrium and decomposition constants for CAT-catecholamine complexes have been evaluated. CH₃C₆H₄SO₂NHCl of the oxidant has been postulated as the reactive oxidizing species and oxidation products were identified. An isokinetic relationship is observed with β=361 K, indicating that enthalpy factors control the reaction rate. The mechanism proposed and the derived rate law are consistent with the observed kinetics.     

NRET from naphthalene labels in multilayer shell wall on melamine formaldehyde microparticles fabricated with layer-by-layer self-assembly to pyrene-labeled polyelectrolyte in solution

Core-shell colloidal particles were prepared with the core of monodisperse melamine formaldehyde particles (MF) with a diameter of 3.5 μm. The shell deposited on the core by the layer-by-layer (LbL) self-assembly was made with a copolymer ANp3 of 2-acrylamido-2-methylpropanesulfonate sodium (AMPS) and 3 mol% naphthalene label monomer and poly(diallyldimethylammonium chloride) (PD). Nonradiative energy transfer (NRET) from the naphthalene labels deposited on the MF particles to pyrene labels at a polyelectrolyte APy3, a copolymer of AMPS and 3 mol% pyrene label monomer, or to an ionic pyrene probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl) in water was observed. The NRET efficiency was expressed as the emission intensity ratio I/I₀ of naphthalene with and without existence of pyrene in the surrounding solution. With increasing pyrene concentration, I/I₀ decreased down to about 0.2 and the mechanism for this NRET from the inner naphthalene label to the pyrene labels in solution is still ambiguous.     

Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

Aqueous p-nitrotoluene oxidation induced with direct glow discharge plasma

A plasma induced degradation process has been studied to treat 4-nitrotoluene (4-NT) present as an aqueous pollutant. The plasma was locally generated from a glow discharge around a tip of a platinum anode in an electrolytic solution. The influence of initial pH and Fe²⁺ on the degradation was examined. Major intermediates resulting from the degradation process were identified. Amongst the aromatic intermediates, p-hydroxybenzoic acid was the predominant degradation product. The formation of oxalic acid, malic acid was also observed. The final products of degradation were NH ₄ ⁺ , NO ₃ ⁻ and CO₂. Based on the analysis of intermediates and the kinetic considerations, the degradation was shown to follow a pseudo-first order reaction hence, a possible reaction pathway was proposed.     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

Optimization of the design and operation of FAIMS analyzers

Field asymmetric waveform ion mobility spectrometry (FAIMS) holds significant promise for post-ionization separations in conjunction with mass-spectrometric analyses. However, a limited understanding of fundamentals of FAIMS analyzers has made their design and operation largely an empirical exercise. Recently, we developed an a priori simulation of FAIMS that accounts for both ion diffusion (including anisotropic components) and Coulomb repulsion, and validated it by extensive comparisons with FAIMS/MS data. Here it is corroborated further by FAIMS-only measurements, and applied to explore how key instrumental parameters (analytical gap width and length, waveform frequency and profile, the identity and flow speed of buffer gas) affect FAIMS response. We find that the trade-off between resolution and sensitivity can be managed by varying gap width, RF frequency, and (in certain cases) buffer gas, with equivalent outcome. In particular, the resolving power can be approximately doubled compared to "typical" conditions. Throughput may be increased by either accelerating the gas flow (preferable) or shortening the device, but below certain minimum residence times performance deteriorates. Bisinusoidal and clipped-sinusoidal waveforms have comparable merit, but switching to rectangular waveforms would improve resolution and/or sensitivity. For any waveform profile, the ratio of two between voltages in high and low portions of the cycle produces the best performance.     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

一种基于流动注射梯度技术识别异常峰及校正的方法

基于流动注射梯度信息提出了一种利用梯度比均值进行定量的校正方法。方法具有在线自动判别和修复异常峰并自行校正的功能，和通用的标准系列定量方法相比，两者测定精度相当。但本文提出的方法抗干扰能力明显优于后者，可适用于在线过程监测。     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.