Liquid Chromatographic Analysis of Arabinosylcytosin and 1-β-D-Arabinofuranosyluracil in Treatment with Cyclophosphamide and Pirarubicin

A reversed-phase liquid chromatographic (RPLC) method has been developed for determination of arabinosylcytosin (Ara-C) and its metabolite 1-β-D-arabinofuranosyluracil (Ara-U) on a 250 mm × 4.6 mm i.d., 5 μm particle, Diamonsil C₁₈ column. The mobile phase was a mixture of 5% methanol and 95% 10 mmol L⁻¹ phosphate buffer adjusted to pH 5.5. The flow-rate was 1.0 mL min⁻¹ and the injection volume 20 μL. Eluting compounds were detected at 270 nm by use of an ultraviolet detector. Under these LC conditions cyclophosphamide (CTX) and pirarubicin (THP), two other medicines given with Ara-C in clinical treatment, do not interfere with measurement of Ara-C and Ara-U. Individual calibration plots of peak area against concentration generated from analysis of standard solutions were used to calculate the concentrations of Ara-C and Ara-U in sample solutions. The calibration plot was linear in the range 2.5–100 μg mL⁻¹, the average recovery of Ara-C and Ara-U was more than 98% (RSD < 2.5%), and between-day and within-day precision, expressed as relative standard deviation (RSD), were below 4.0%. LOQ for both Ara-C and Ara-U was 2 μg mL⁻¹. The method is rapid, simple, accurate and reproducible, and especially useful for application to patient samples.     

A synthesis of aromatic five- and six-membered B-N heterocycles via ring closing metathesis

The ring closing metathesis on appropriate vinyl or allyl aminoboranes (1 or 2) gives azaboracycloalkenes (3 or 4) which can be converted to azaborolides (5) or azaborines (6).     

Highly efficient visible-light photocatalytic ethane oxidation into ethyl hydroperoxide as a radical reservoir

Photocatalytic ethane conversion into value-added chemicals is a great challenge especially under visible light irradiation. The production of ethyl hydroperoxide (CH₃CH₂OOH), which is a promising radical reservoir for regulating the oxidative stress in cells, is even more challenging due to its facile decomposition. Here, we demonstrated a design of a highly efficient visible-light-responsive photocatalyst, Au/WO₃, for ethane oxidation into CH₃CH₂OOH, achieving an impressive yield of 1887 μmol g_cat⁻¹ in two hours under visible light irradiation at room temperature for the first time. Furthermore, thermal energy was introduced into the photocatalytic system to increase the driving force for ethane oxidation, enhancing CH₃CH₂OOH production by six times to 11 233 μmol g_cat⁻¹ at 100 °C and achieving a significant apparent quantum efficiency of 17.9% at 450 nm. In addition, trapping active species and isotope-labeling reactants revealed the reaction pathway. These findings pave the way for scalable ethane conversion into CH₃CH₂OOH as a potential anticancer drug.

Highly efficient visible-light driven photocatalytic oxidation of ethane into ethyl hydroperoxide was realized for the first time over Au/WO₃.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

Electron paramagnetic resonance study of amphiphiles partitioning behavior in desiccation-tolerant moss during dehydration

Desiccation tolerance is a crucial characteristic for desert moss surviving in arid regions. Desiccation procedure always induces amphiphiles transferring from the polar cytoplasm into lipid bodies. The behavior of amphiphiles transferring can contribute to the enhancement of desiccation tolerance and the reduction of plasma membrane integrity simultaneously. The effects of amphiphiles partitioning into the lipid phase during water loss has been studied for pollen and seeds using electron paramagnetic resonance (EPR) spectroscopy. However, desiccation-tolerant high plants occur among mosses, several angiosperms and higher plants seeds or pollens. They have different strategies for survival in dehydration and rehydration. A desiccation-tolerant moss Tortula desertorum was used to investigate the behaviors of amphiphilic molecules during drying by spin label technology. There are small amount of amphiphilic probes partitioning into membrane during moss leaves dehydration, comparing with that in higher plants. Cytoplasm viscosity changed from 1.14 into glass state only dehydration less than 60 min. Moss leaves lost plasma membrane integrity slightly, from 0.115 to 0.237, occurred simultaneously with amphiphiles partition. The results showed the more advantages of mosses than higher plants in adapting fast dehydration. We propose that EPR spin label is feasible for studying the amphiphiles partitioning mechanisms in membrane protection and damage for desiccation-tolerant mosses.     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.