Nano composite system based on coumarin derivative–titanium dioxide nanoparticles and ionic liquid: Determination of levodopa and carbidopa in human serum and pharmaceutical formulations

The combination of coumarin derivative (7-(1,3-dithiolan-2-yl)-9,10-dihydroxy-6H-benzofuro[3,2-c]chromen-6-on), (DC)–titanium dioxide nanoparticles (TiO₂) and ionic liquid (IL) yields nanostructured electrochemical sensor, formed a novel kind of structurally uniform and electrocatalytic activity material. This new ionic liquid–TiO₂ nanoparticles modified carbon paste electrode (IL–CTP) due to its enhanced conductivity presented very large current response from electroactive substrates. The modified electrode was characterized by different methods including a scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS) and voltammetry. A pair of well-defined quasi reversible redox peaks of coumarin derivative was obtained at the modified carbon paste electrode (DC/IL–CTP) by direct electron transfer between the coumarin derivative and the CP electrode. Dramatically enhanced electrocatalytic activity was exemplified at the DC/IL–CTP electrode, as an electrochemical sensor to study the electro oxidation of levodopa (LD) and carbidopa (CD). Based on differential pulse voltammetry (DPV), the oxidation of LD and CD exhibited the dynamic range between 0.10– 900.0 μM and 20.0–900.0 μM respectively, and the detection limit (3σ) for LD and CD were 41 nM and 0.38 μM, respectively. DPV was used for simultaneous determination of LD and CD at the DC/IL–CTP electrode, and quantitation of LD and CD in some real samples (such as tablets of Parkin-C Fort and Madopar, Sinemet, water, urine, and human blood serum) by the standard addition method.     

Fe(NO3)3·9H2O as Efficient Catalyst for One‐pot Synthesis of Highly Functionalized Piperidines

Fe(NO₃)₃·9H₂O is used as an efficient and effective catalyst for the one‐pot three‐component synthesis of highly functionalized piperidines from aromatic aldehydes, anilines and b–ketoesters in ethanol at ambient temperature. This procedure includes some important aspects like the easy work‐up, no need to column chromatography, simple and readily available precursors, and good to high yields.     

Trifluoroacetic Acid as an Efficient Catalyst for One-Pot,Four-Component Synthesis of 1,2,4,5-Tetrasubstituted Imidazoles Under Microwave-Assisted,Solvent-Free Conditions

An efficient method for synthesis of various tetrasubstituted imidazoles, using trifluoroacetic acid (TFA) as a catalytic support, by four-component condensation of benzil, aldehydes, amines, and ammonium acetate under microwave-irradiated, solvent-free conditions is described.     

Synthesis of Alkyl (5-Oxo-2-thioxo-[1,3,4]thiadiazinan-6-ylidene)acetates by the Reaction of N-Aminorhodanine,Dialkyl Acetylenedicarboxylates,and Triphenylphosphine

Protonation of the reactive zwitterionic intermediate produced from the reaction between triphenylphosphine and dialkyl acetylenedicarboxylates by N-aminorhodanine followed by the addition of the conjugate anion of N-aminorhodanine on the produced vinylphosphonium cation leads to alkyl (5-oxo-2-thioxo-[1,3,4]thiadiazinan-6-ylidene)acetates in good yields.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.

Modified dispersive liquid-liquid microextraction for pre-concentration of benzene, toluene, ethylbenzene and xylenes prior to their determination by GC

We have developed a modified method for the extraction and preconcentration of benzene, toluene, ethylbenzene and xylenes (BTEX) in aqueous samples. It based on dispersive liquid-liquid microextraction along with solidification of floating organic microdrops. The dispersion of microvolumes of an extracting solvent into the aqueous occurs without dispersive solvent. Various parameters have been optimized. BTEX were quantified via GC with FID detection. Under optimized conditions, the preconcentration factors range from 301 to 514, extraction efficiencies from 60 to 103 %, repeatabilities from 2.2 to 4.1 %, and intermediate precisions from 3.5 to 7.0 %. The relative recovery for each analyte in water samples at three spiking levels is >85.6 %, with a relative standard deviation of <7.4 %.

Facile and Efficient Method for the Synthesis of 14-Substituted-14-H-dibenzo[a,j]xanthenes Catalyzed by Ruthenium Chloride Hydrate as a Homogeneous Catalyst

Synthesis of dibenzoxanthenes through condensation of β-naphthol with various aromatic and aliphatic aldehydes in ethanol as an ecofriendly solvent using Ru^III as catalyst is reported.

Characterization of Chitosan/Alginate Self-Assembled Nanoparticles as a Protein Carrier

The aim of this study was to evaluate the effect of the polymeric ratios on the characteristics of chitosan/alginate (ch/alg) self-assembled nanoparticles and their potential as protein delivery vehicle. The nanoparticles were prepared using proper mixing of polymers in presence or absence of bovine serum albumin (BSA) as a protein model. Three formulations of nanoparticles comprising ch/alg ratios of 2:1, 1:1, and 1:2 were prepared. Size, shape and zeta potential of the formulations were studied by scanning electron microscopy (SEM) and nanosizer instruments. FTIR, and differential scanning calorimetery (DSC) studies were performed to investigate polymer-polymer or polymer-protein interactions. Release profiles and entrapment efficiencies of the nanoparticles were determined by calorimetric technique using appropriate techniques. Entrapment efficiency was 70% for ch/alg ratio of 1:1, 65% for 1:2, and 60% for 2:1. The z-average size of the nanoparticles were 403, 205, and 318 nm for ch/alg ratios of 2:1, 1:1, and 1:2, respectively. Average zeta potentials were ?47, +15, ?25 mV for 2:1, 1:1, and 1:2 as well. Considering the favorable features required for protein delivery systems, ch/alg (1:1) due to its smallest size, highest loading, and most homogenous shape was regarded as the best ratio.     

A quick and green ionic liquid-mediated approach for the synthesis of high-performance, organosoluble and thermally stable polyimides

Three diamine monomers with different derivatives of imidazole heterocyclic ring and meta-linked aryl ethers were synthesized and used in polycodensation reaction with various commercial dianhydrides for preparation of a series of novel poly(ether-imide) (PEI)s. The polycodensation reactions were carried out by using conventional method and in a green medium of ionic liquid (IL) without using NMP-pyridine-acetic anhydride. The PEIs were obtained in good yields (80% 96%) with moderate viscosity (0.48 0.66 dL/g) in a shorter reaction time (10 h) in IL as compared with the conventional method (36 h). All of the polymers were amorphous in nature, showed excellent solubility in amide-type polar aprotic solvents with ability to form tough and flexible films, and excellent thermal stability with Tgs in the range of 212 340 ℃ and 10% weight loss temperature (T10) up to 570℃ in N 2 and 528 ℃ in air.     

Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane

An experimental study on the pertraction of methylene blue (MB) through a supported liquid membrane (SLM) using a mixture of mono-(2-etylhexyl) ester of phosphoric acid (M2EHPA) and bis-(2-etylhexyl) ester of phosphoric acid (D2EHPA) and sesame oil as the liquid membrane (LM) was performed. Parameters affecting the pertraction of MB such as initial MB concentration, carrier concentration, feed phase pH, and stripping phase concentration were analyzed. Optimal experimental conditions for MB pertraction (permeability of 5.63 × 10^?6) were obtained after a 7 h separation with the MB concentration in the feed phase of 80 mg L^?1, D2EHPA/M2EHPA concentration in membrane phase of 40 vol. %, feed pH of 6, and acetic acid concentration in the stripping phase of 0.4 mol L^?1. Kinetics of transport and stability of the SLM system were also studied and the mass transfer coefficient for this system was evaluated. Scanning electron microscopy (SEM) was used to morphologically characterize the membrane surface.