A new method for the quantitative analysis of organochlorine pesticides and polychlorinated biphenyls

A simple method is described for the quantitative determination of organochlorine pesticides and polychlorinated biphenyls (PCB's) in water at the sub-ppb level. A micro gas-phase extractor advantageously replaces other preconcentration and purification techniques. The extract is analyzed by capillary gas chromatography without further enrichment. The recovery at the ppb level was nearly 100% for organochlorine pesticides and more than 80% for PCB's. The complete procedure including sample preparation, steam distillation-extraction, and capillary gas chromatographic analysis is carried out in less than four hours.     

Synthesis and use of alpha-silyl-substituted alpha-hydroxyacetic acids

[reaction: see text] Rhodium-catalyzed oxygen transfer was used to generate benzyl 2-silyl-2-oxoacetates in good yields. The hydrogenation of these compounds led to chiral alpha-silyl-substituted alpha-hydroxyacetic acids. Resolution by means of HPLC using a chiral stationary phase afforded an enantiomerically pure representative of this class of compounds, which was successfully applied as a chiral ligand in an asymmetric aldol-type reaction.     

The use of comet assay data with a simple reaction mechanism to evaluate the relative effectiveness of free radical scavenging by quercetin, epigallocatechin gallate and N-acetylcysteine in UV-irradiated MRC5 lung fibroblasts

Comet assay data (tail DNA %) have been gathered for the concentration dependent role of three antioxidants (AOs); quercetin (Q), epigallocatechin gallate (EGCG) and N-acetylcysteine (NAC) in reducing UV-induced damage to DNA in normal fetal lung fibroblasts (MRC5). All three compounds demonstrate a concentration dependent reduction maximum with a pro-oxidant effect at higher (though not cytotoxic) concentrations. Manipulation of a simple 4-step reaction mechanism for free radical (FR) scavenging by AOs produced rate constant ratios which allowed the relative effectiveness (Q > EGCG > NAC) of the AOs to be evaluated.     

Deuterium spin probes of side-chain dynamics in proteins. 1. Measurement of five relaxation rates per deuteron in (13)C-labeled and fractionally (2)H-enriched proteins in solution

New pulse sequences are presented for the measurement of the relaxation of deuterium double quantum, quadrupolar order, and transverse antiphase magnetization in (13)CH(2)D methyl groups of (15)N-, (13)C-labeled, fractionally deuterated proteins. Together with previously developed experiments for measuring deuterium longitudinal and transverse decay rates [Muhandiram, D. R.; Yamazaki, T.; Sykes, B. D.; Kay, L. E. J. Am. Chem. Soc. 1995, 117, 11536], these schemes allow measurement of the five unique decay constants of a single deuteron, providing an unprecedented opportunity to investigate side-chain dynamics in proteins. All five deuterium relaxation rates have been measured for deuterons in the methyl groups of the B1 immunoglobulin binding domain of peptostreptococcal protein L and the N-terminal SH3 domain from the protein drk. Since values of the spectral density function at only three different frequencies contribute to the five relaxation rates, the self-consistency of the relaxation data is readily established. Very good agreement is obtained between calculated parameters describing the amplitudes and time scales of motion when different subsets of the relaxation data are employed.     

(PPh4)2[MoN(N3)3Cl]2; Synthese,IR-Spektrum und Kristallstruktur

(PPh₄)₂[MoN(N₃)₃Cl]₂; Synthesis, IR Spectrum, and Crystal Structure The title compound is formed in the reaction of molybdenum (II) benzoate with trimethylsilyl azide and PPh₄Cl in dichloro methane forming dark red single crystals. A PPh₃Me⊕ salt of the ion [MoN(N₃)₃Cl]₂^2? is obtained from (PPh₃Me)₂MoNCl₄] treated with silver azide in CH₂Cl₂ suspension. The solvent CH₂Cl₂ participates in both reactions as oxidizing agent. (PPh₄)₂[MoN(N₃)₃Cl₂ is characterized by a structural analysis based upon X-ray data: space group P1 , Z = 1, a = 1050.7 pm; b = 1185.4 pm; c = 1190.8 pm; α = 98.90°; β = 106.87°; γ = 103.97° (4505 independent, observed reflexions, R = 0.039). The compound consists of PPh₄⊕ cations and centrosymmetric anions [MoN(N₃)₃Cl₂^2? in which the molybdenum atoms are bridged by the N_α atoms of two azide groups; the resulting Mo? N bond lengths are 208 pm and 260 pm. In trans position to the long Mo? N bond the terminal nitrido ligand is situated, the Mo?N distance of 164 pm corresponds to a triple bond. Two terminal azido ligands and the chloro ligand are filling up the coordination sphere of the molybdenum atoms to a coordination number of six. The i.r. spectrum is reported and assigned.     

Speciation of cationic selenium compounds in Brassica juncea leaves by strong cation-exchange chromatography with inductively coupled plasma mass spectrometry

Strong cation-exchange chromatography (SCX-HPLC) was used in conjunction with inductively coupled plasma mass spectrometry (ICP-MS) to investigate cationic selenium species present in leaf extract of wild-type Brassica juncea supplemented with selenite. Total amount of Se accumulated by the leaves was found to be 352 microg g(-1). Cation-exchange solid-phase extraction (SCX-SPE) was used to pre-concentrate the cationic species present in the leaf extract. Methylselenomethionine (MeSeMet) and dimethylselenoniumproprionate (DMSeP) were synthesized and characterized by electrospray quadrupole time-of-flight MS (ESI-QTOF-MS). Laboratory synthesized and commercially available standards were used in chromatographic studies to identify the Se species in the leaf extract through retention time comparisons and standard addition method. Major cationic selenium species identified in the present study were MeSeMet and methylselenocysteine (MeSeCys) while selenomethionine (SeMet) was found in minor quantities.     

Electropolymerization of aminophthalic acids. I. Polymerization of 4-aminophthalic acid

4-Aminophthalic acid has been polymerized in almost quantitative yield to low molecular weight polymer by electrochemical initiation at a platinum anode. Systems involving the acid, amine salt, and the ammonium salt have been explored; the acid and/or the amine salt of the acid provides the best means of obtaining polymer. Maximum molecular weight is attained in a very short time at low current densities (～2 hr at 50 mA). Thermogravimetric data indicate a temperature stability comparable to polyamide-imide polymers (400°C). Long reaction times and high current densities decrease molecular weight and polymer yield.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Capillary gas chromatographic separation of C10–C12 secondary phenylalkanes on modified cyclodextrin stationary phases

The separation of isomers and enantiomers of branched C₁₀-C₁₂ phenylalkanes by gas chromatography on fused silica capillary columns coated with some modified β- and γ-cyclodextrins was studied. It was shown that the separation of positional isomers of C₁₀-C₁₂ phynylalkanes on modified cyclodextrin capillary columns is not better than that on a column coated with modified polyethylene glycol. Differences were found in the enantioselectivity of modified β- and γ-cyclodextrins for the separation of C₁₀-C₁₂ secondary phenylalkane enantiomers. While alkylderivatives of β-CDs resolve enantiomers of 3-phenylalkanes, alkyl derivatives of γ-CD resolve enantiomers of 2-phenylalkanes. Since shape selectivity factors of modified cyclodextrins have indicated no inclusion of the considered solutes in cyclodextrin cavities, enantioselective interactions most probably occur on the outer sphere of cyclodextrins.