Capillary electrochromatography without external pressure assistance. Use of packed columns with a monolithic inlet frit

A fused silica capillary column was packed with RP(18) silica stationary phase entrapping the particles between two frits obtained by two different procedures. The inlet frit consisted of a short organic polymer made via a thermopolymerization process while the outlet frit was prepared by sintering the octadecylsilica (ODS) material. The packed column was employed in capillary electrochromatography (CEC) experiments for the separation of three selected test compounds. Retention time and separation efficiency were evaluated. Results were compared with those ones obtained with a packed capillary containing the same stationary phase entrapped between two sinterized frits. The novel packed column exhibited comparable separation efficiency and resolution with the traditional one. However, it allowed experiments without pressure support during the runs with no bubble formation.     

Synchronous fluorescence spectroscopy and gas chromatography to determine the effect of UV irradiation on crude oil

The fate of the crude oil under irradiation was studied. After the UV irradiation, the fraction present in the highest percentage shifted from C8–C9 fraction to C13 one, in GC–MS analysis. An increase of the relative amount of the C13–C25 fraction was observed, while a decrease in the relative amount of the C7–C12 fractions was present. The synchronous fluorescence spectrum showed a maximum at 396 nm. Two hours irradiation of the sample induced an increase of the fluorescence emission in the region 420–550 nm. After 20, 40, 60, and 100 h irradiation we observed a decrease of the fluorescence emission.     

Self-assembled monolayers of an oligo(ethylene oxide) disulfide and its corresponding thiol assembled from water: characterization and protein resistance

Self-assembled monolayers (SAMs) of the disulfide [S(CH2CH2O)6CH3]2 ([S(EO)6]2) on Au from 95% ethanol and from 100% water are described. Spectroscopic ellipsometry and reflection-absorption infrared spectroscopy indicate that the [S(EO)6]2 films are similar to the disordered films of HS(CH2CH2O)6CH3 ((EO)6) and HS(CH2)3O(CH2CH2O)5CH3 (C3EO5) at their protein adsorption minima. The [S(EO)6]2 SAMs exhibit constant film thickness (d) of 1.2 +/- 0.2 nm over long immersion times (up to 20 days) and do not attain the highly ordered, 7/2 helical structure of the (EO)6 and C3EO5 SAMs (d = 2.0 nm). Exposure of these self-limiting [S(EO)6]2 SAMs to bovine serum albumin show high resistance to protein adsorption.     

IPG with electrodic plateaus (and other unusual procedures for 2-DE)

We describe some simple changes to the geometry of the IPG strips that make them suitable to the loading of very large sample volumes and of high-salt solutions. Of special relevance is the possibility of using strips with immobilized plateau(s) to either side of the gradient, or to both, also in connection with in-gel rehydration protocols and focusing in stock trays. The only requirement to achieve this is to leave the all-ready-made attitude and go back to custom polymerization of the IPGs in one's laboratory.     

Enantioselective hydrogenation with self-assembling rhodium phosphane catalysts: influence of ligand structure and solvent

Three sets of new and related chiral phospholane and phosphepine ligands have been prepared for Rh-catalyzed enantioselective hydrogenation. The size and substitution pattern of the cyclic monophosphanes were varied. More importantly, the ligands differ in the nature of the heterocyclic group linked to the trivalent phosphorus atom: 2-pyridone or 2-alkoxypyridine. In the corresponding Rh complexes, the pyridone units of two monodentate P ligands can assemble by hydrogen bonding and form chelates. In contrast, synthetic precursors bearing alkoxypyridine appendages are not able to aggregate via intramolecular hydrogen bonds. The nature of self-assembly is dependent on the nature of the P ligand and the solvent used for the hydrogenation (CH2Cl2 vs. MeOH). These features affect the rate of the reaction as well as the enantioselectivity, which varied in the range of 0-99 % ee Complexation studies and DFT calculations were performed to explain these differences.     

Interaction of lipophilic gemcitabine prodrugs with biomembrane models studied by Langmuir-Blodgett technique

The stability and bioavailability of anticancer agents, such as gemcitabine, can be increased by forming prodrugs. Gemcitabine is rapidly deaminated to the inactive metabolite (2('),2(')-difluorodeoxyuridine), thus to improve its stability a series of increasingly lipophilic gemcitabine prodrugs linked through the 4-amino group to valeroyl, lauroyl, and stearoyl acyl chains were synthesized. Studies of monolayer properties are important to improve understanding of biological phenomena involving lipid/gemcitabine or lipid/gemcitabine derivative interactions. The interfacial behavior of monolayers constituted by DMPC plus gemcitabine or lipophilic gemcitabine prodrugs at increasing molar fractions was studied at the air/water interface at temperatures below (10 degrees C) and above (37 degrees C) the lipid phase transition. The effect of the hydrophobic chain length of gemcitabine derivatives on the isotherm of pure DMPC was investigated by surface tension measurement, and the results are reported as molar fractions as a function of mean molecular area per molecule. The results show that the compounds interact with DMPC producing mixed monolayers that are subject to an expansion effect, depending on the prodrug chain length. The results give useful hints of the interaction of these prodrugs with biological membranes and increase knowledge on the incorporation site of such compounds, as a function of their lipophilicity, in a lipid carrier; they may lead to improved liposomal formulation design.     

Intercalation of tris-(2,2′-bipyridyl) ruthenium (II) in α- and γ-zirconium phosphate: synthesis, thermal behaviour and X-ray characterization

Intercalation compounds such as the ruthenium trisbipyridyl complex in inorganic layered ion-exchangers (α- and γ-zirconium phosphate) have been synthesized using the batch method. There is no loss of bipyridyl ligand from the metal ion during the exchange of the ruthenium trisbipyridyl complex in these host matrices. The materials obtained are thermally stable up to ~330 °C (γ-phase) or ~380 °C (α-phase). The complex decomposition occurs in one or more steps and at ~600 °C the complex decomposition is complete. The X-ray patterns of ruthenium materials show a new phase with an increase in the interlayer distance with respect to the initial phase. Microanalysis measurements confirm the fact that the ruthenium complex is not modified when exchanged and the complex decomposition depends on its position in the host matrices.     

Investigations by various analytical techniques to the correct classification of archaeological finds and delineation of technological features: Late Roman lamps from Egnatia: From imports to local production

Late Roman oil lamps from the archaeological site of Egnatia (Fasano, Brindisi, Italy) were characterized from physical–chemical, mineralogical and morphological points of view. Atomic Spectroscopy, Scanning Electron Microscopy and X-Ray Diffraction analyses were carried out on ceramic body and coatings with the aim of identifying the provenance of lamps, in order to arrive at a correct archaeological classification of finds and to outline their technological features.The analytical results show that the finds differ in raw materials and in production technology. The statistical multivariate treatment of compositional data of ceramic bodies groups the objects into two macro clusters and, according to a study of their different petrographic features and by a comparison with coeval pottery whose provenance is already known, suggests one group to have been imported from North Africa and the other to have been locally produced. Moreover, chemical results and in-depth archaeological analyses allow us to split the imported lamps into two subgroups, hypothesizing the first group to originate from central Tunisia and the second from the north of the same country.The analytical characterisation of finds, by different complementary techniques, has allowed us to identify the raw materials and the technological solutions used by the ancient potters from Egnatia to produce lamps. The potters made lamps which had an external appearance very similar to that of African prototypes, but which were nevertheless different as they employed the locally available materials.