Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Air-coupled ultrasonic assessment of wood veneer

Air-coupled ultrasound (ACU) provides a tool to evaluate wood samples of small or moderate thickness (<30 mm) thereby avoiding direct contact or liquid coupling. Results of through-transmission ACU measurements on wood veneer samples and related products are reported with respect to a wide variety of quality aspects. Fluctuations in the averaged received signal levels appear to be correlated to the presence of natural or machine-induced thickness and density variations, flaws and grain damage, errors produced by the manufacturing process, insufficient bonding on a substrate, etc. In addition it is seen that the variability of the signal levels enables to distinguish between quarter and crown areas.     

Suspension settings for optimal ride comfort of off-road vehicles travelling on roads with different roughness and speeds

This paper reports on an investigation to determine the spring and damper settings that will ensure optimal ride comfort of an off-road vehicle, on different road profiles and at different speeds. These settings are required for the design of a four stage semi-active hydro-pneumatic spring damper suspension system (4S₄). Spring and damper settings in the 4S₄ can be set either to the ride mode or the handling mode and therefore a compromise ride-handling suspension is avoided. The extent to which the ride comfort optimal suspension settings vary for roads of different roughness and varying speeds and the levels of ride comfort that can be achieved, are addressed. The issues of the best objective function to be used when optimising and if a single road profile and speed can be used as representative conditions for ride comfort optimisation of semi-active suspensions, are dealt with. Optimisation is performed with the Dynamic-Q algorithm on a Land Rover Defender 110 modelled in MSC.ADAMS software for speeds ranging from 10 to 50 km/h. It is found that optimising for a combined driver plus rear passenger seat weighted root mean square vertical acceleration rather than using driver or passenger values only, returns the best results. Results indicate that optimisation of suspension settings using one road and speed will improve ride comfort on the same road at different speeds. These settings will also improve ride comfort for other roads at the optimisation speed and other speeds, although not as much as when optimisation has been done for the particular road. For improved ride comfort damping generally has to be lower than the standard (compromised) setting, the rear spring as soft as possible and the front spring ranging from as soft as possible to stiffer depending on road and speed conditions. Ride comfort is most sensitive to a change in rear spring stiffness.     

How thermal curing of an organic paper coating changes topography, chemistry, and wettability

Celluloses are preferred renewable substrates, but hydrophilicity and porosity disfavor their water resistance. We present here an ecofriendly application of imidized nanoparticles and a method to flexibly tune the surface wettability of papers. The soft nanostructured coating is sensitive to thermal curing, which affects both the surface chemistry and morphology. The thermal stability of the coating is first investigated with conventional and modulated differential scanning calorimetry, revealing influences of the imide content and an endotherm reaction below the glass transition temperature at 120-150 °C. The latter is studied in detail for an appropriate selection of the copolymer precursors. According to diffuse reflection infrared spectroscopy, Raman spectroscopy, and UV/vis spectroscopy, the endotherm corresponds to an imidization reaction. The morphology of the coatings is followed at various scale levels by contactless roughness measurements and atomic force microscopy. Finally, the experimental values are fitted to the parameters of the Wenzel wetting model, and so-called calibration curves for the relation between contact angles, surface roughness, and surface chemistry are presented. They allow the prediction of the water contact angle of coated papers from the hydrophilic to the hydrophobic range, with a maximum in hydrophobicity after increasing the imide content at 120-150 °C curing.     

Magnetically induced decrease in droplet contact angle on nanostructured surfaces

We report a magnetic technique for altering the apparent contact angle of aqueous droplets deposited on a nanostructured surface. Polymeric tubes with embedded superparamagnetic magnetite (Fe(3)O(4)) nanoparticles were prepared via layer-by-layer deposition in the 800 nm diameter pores of polycarbonate track-etched (PCTE) membranes. Etching away the original membrane yields a superparamagnetic film composed of mostly vertical tubes attached to a rigid substrate. We demonstrate that the apparent contact angle of pure water droplets deposited on the nanostructured film is highly sensitive to the ante situm strength of an applied magnetic field, decreasing linearly from 117 ± 1.3° at no applied field to 105 ± 0.4° at an applied field of approximately 500 G. Importantly, this decrease in contact angle did not require an inordinately strong magnetic field: a 15° decrease in contact angle was observed even with a standard alnico bar magnet. We interpret the observed contact angle behavior in terms of magnetically induced conformation changes in the film nanostructure, and we discuss the implications for reversibly switching substrates from hydrophilic to hydrophobic via externally tunable magnetic fields.     

Comparison between 2-hydroxypropyl-��-cyclodextrin and 2-hydroxypropyl-��-cyclodextrin for inclusion complex formation with danazol

Complexation in solution between danazol and two different cyclodextrins [2-hydroxypropyl-??-cyclodextrin (HP-??-CD) and 2-hydroxypropyl-??-cyclodextrin (HP-??-CD)] was studied using phase solubility analysis, and one- and two-dimensional ¹H-NMR. The increase of danazol solubility in the aqueous cyclodextrin solutions showed a linear relationship (A_L profile). The apparent stability constant, K _1:1, of each complex was calculated and found to be 51.7 × 10³ and 7.3 × 10³ M^?1 for danazol?CHP-??-CD and danazol?CHP-??-CD, respectively. ¹H-NMR spectroscopic analysis of varying ratios of danazol and the different cyclodextrins in a mixture of EtOD?CD₂O confirmed the 1:1 stoichiometry. Cross-peaks, from 2D ROESY ¹H-NMR spectra, between protons of danazol and H3?? and H5??of cyclodextrins, which stay inside the cyclodextrin cavity, proved the formation of an inclusion complex between danazol and the cyclodextrins. For HP-??-CD, the inclusion complex is formed by entrance of the isooxazole and the A rings of danazol in the cyclodextrin cavity. For HP-??-CD, two different inclusion structures may exist simultaneously in solution: one with the isooxazole and A ring in the cavity and the other with the C and D ring inside the cavity. DLS showed that self-aggregation of the CD??s was absent in the danazol HP-??-CD system up to a CD concentration of 10% and in the danazol HP-??-CD system up to a CD concentration of 5%.     

Morniga G: a plant lectin as an endocytic ligand for photosensitizer molecule targeting toward tumor-associated T/Tn antigens

Porphyrins are used as photosensitizer (PS) in photodynamic therapy in cancer treatment. Nevertheless, the development of photochemotherapy in oncology remains limited, because of the low selectivity of PSs. In order to allow PS targeting toward tumor-associated antigens, for the first time a white-light activatable porphyrin, [5-(4-(5-carboxy-1-butoxy)-phenyl)-10,15,20-tris(4-N-methyl)-pyridiniumyl)-porphyrin] (TrMPyP) was covalently linked to Morniga G (MorG), a galactose-specific binding plant lectin, known to recognize with high-affinity tumor-associated T/Tn antigen in cell-free systems. Firstly, using fluorescein-labeled MorG, the sugar-dependent binding and uptake of lectin by Tn-positive (Jurkat lymphoid leukemia) cells was demonstrated. Secondly, the TrMPyP-MorG conjugate was molecularly characterized. Cytometric and confocal microscopic analysis demonstrated that PS covalent linking to MorG preserved sugar-dependent specific binding and uptake of lectin by Jurkat leukemia lymphocytes. Thirdly, the conjugate (with a 1:1 PS:lectin ratio) that was bound and quickly (5 min) taken-up, induced greater than 90% cytotoxicity upon irradiation at 10 nm concentration, whereas the free PS was absolutely nontoxic. On the contrary, normal lymphocytes strongly resisted to the conjugate-mediated phototoxicity. Thus, owing to their binding and endocytosis capacities, plant lectins represent promising molecules for targeting of tumor glycan alteration and to enhance the efficiency of specific delivery of PSs to tumor cells.     

Investigation towards an efficient synthesis of benzo[g]isoquinoline-1,5,10(2H)-triones

As part of our research on 2-aza analogues of pentalongin, the active principle of Pentas longiflora Oliv., the first synthesis of 2,3-disubstituted benzo[g]isoquinoline-1,5,10(2H)-triones via 3,4-disubstituted 6-hydroxybenzo[g]furo[4,3,2-de]isoquinoline-2,5(4H)-diones as the key intermediates is reported. The latter compounds have been prepared by treating 2-methoxycarbonyl-1,4-naphthoquinone with N-substituted enaminoesters under acidic conditions. These reagents are easily accessible from readily available 1,4-dihydroxy-2-naphthoic acid, β-ketoesters and primary amines. Finally, a short synthesis of substituted benzo[g]isoquinoline-1,5,10(2H)-triones is achieved by an oxidative addition of N-substituted enaminoesters onto methyl 1,4-dihydroxynaphthalene-2-carboxylate.     

Additive-free clicking for polymer functionalization and coupling by tetrazine-norbornene chemistry

Herein we report the use of a tetrazine-norbornene inverse electron demand Diels-Alder conjugation applied to polymer end-functionalization and polymer-polymer coupling. The reaction was found to be applicable to polymer-polymer coupling, as judged by SEC, DOSY NMR, and LCxSEC analyses, giving diblock copolymers by merely mixing the constituent homopolymers together under ambient conditions, using no catalyst, additive, or external stimulus.