Interaction of tetraphenyl-porphyrin derivatives with DPPC-liposomes: an EPR study

The effect of the symmetry and polarity of the porphyrin molecules on their membrane localization and interaction with membrane lipids were investigated by electron paramagnetic resonance (EPR). For this purpose, two glycoconjugated tetraphenyl porphyrin derivatives were selected, respectively, symmetrically and asymmetrically substituted. Small unilamellar liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and spin labeled stearic acids were prepared. The spin probe was located at the 5th or 7th or 12th or 16th position of the hydrocarbon chain in order to monitor various regions of the lipid bilayer. EPR spectra of porphyrin-free and porphyrin-bound liposomes were recorded at various temperatures below and above the phase transition temperature of DPPC. The effect on membrane fluidity proved to be stronger with the asymmetrical porphyrin derivative than with the symmetrical one. The rigidity increased when the spin label was near lipid head groups. The difference observed between control and porphyrin-treated samples when measured below the main lipid transition temperature disappeared at higher temperature. When the spin label was near the end of the hydrophobic tails, the symmetrical porphyrin derivative caused increase in fluidity, while the asymmetrical one slightly decreased it. To explain this phenomenon we propose that the asymmetrical derivative exerts a stronger ordering effect caused by its fluorophenyl group located at the level of the lipid heads, which is attenuated to the hydrophobic tails. The perturbing effect of the symmetric derivative could not lead to similar extent of ordering at the head groups and looses the hydrocarbon chains deeper in the membrane.     

Electronic Raman spectroscopy of the vanadium(III) hexaaqua cation in guanidinium vanadium sulphate: Quintessential manifestation of the dynamical Jahn-Teller effect

Single-crystal Raman spectra are presented for the salt [C(NH2)3][V(OH2)6](SO4)2, displaying electronic transitions between the trigonal components of the vanadium(III) 3T1g(Oh) ground term. The 3A-->3E(C3) electronic Raman band is centered at approximately 2720 cm-1, and exhibits extensive structure, revealing the energies of the spinor components of the 3E(C3) term for the two crystallographically distinct [V(OH2)6]3+ cations. The data are interpreted in conjunction with parameters previously reported from an electron paramagnetic resonance study of the salt. A satisfactory reproduction of the electronic Raman profile and ground-state spin-Hamiltonian parameters is achieved by employing a (3A plus sign in circle3E)multiply sign in circle e vibronic coupling model, in which the spin-orbit splitting of the 3E(C3) is quenched significantly by the Ham effect, and the intensity of harmonics of the Jahn-Teller active vibration enhanced by their proximity to the electronic Raman bands. The model gives an excellent account of the intensities of the electronic Raman bands, which are shown to depend profoundly on both temperature and the selected component of the polarizability tensor. The electronic Raman profile changes notably upon deuteriation, a result that exposes deficiencies in the single-mode coupling model.     

Elucidating the mode of action of a corrosion inhibitor for iron

Two polymetallic iron(III) complexes 1 and 2 have been synthesised from the known corrosion inhibitor 3-(4-methylbenzoyl)-propionic acid HL1 and their crystal structures determined. Coordination geometries extracted from these structures have been used as the basis for molecular modelling onto idealised iron(III) oxide surfaces as an aid to understanding the efficacy of inhibitors of the 4-keto acid type. The proposed mode of action involves 1,3-bridging didentate coordination of the carboxylate function of L1 to two FeIII ions, hydrogen-bond formation between the 4-keto group of L1 and a bridging surface hydroxy group, as well as close packing of the aromatic end groups, which should generate a hydrophobic barrier on the surface. Adsorption isotherm experiments have been used to compare the strengths of binding of related carboxylic acids onto iron(III) oxide surfaces and indicate that the presence of the 4-keto function leads to the formation of significantly more stable surface complexes.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

Simultaneous off-shell excitation of He 23 S by an electron and one or more photons

We report data on the excitation of the 2³ S metastable state in helium by electrons in the presence of an intense laser field. The metastable signal is detected when the electron energy is insufficient to excite this state by itself. The additional energy comes from a pulsed CO₂ laser developing peak intensities in the interaction region in the 10⁸ W× cm^?2 range and requires the absorption of one or more photons. This process involves the active participation of all three bodies: the electron, the photon and the target atom. These data represent the first observation of this process when more than one photon is required.     

The synthesis and characterisation of ferromagnetic CaMn2O4 nanowires.

The synthesis of marokite CaMn(2)O(4) nanowires using a hydrothermal method is reported. Transmission electron microscopy and electron diffraction measurements show that the nanowires are polycrystalline in nature with diameters between 10 and 20 nm and lengths ranging from approximately 100 to 500 nm. Most interestingly, in contrast with the bulk material, magnetization measurements show that these nanowires exhibit ferromagnetic ordering with a Curie temperature (T(C)) of approximately 40 K.     

The stannylation of carbonyl-stabilised phosphorus ylids,and tin-assisted elimination reactions

The interaction of organotin halides with lithium salts of mono-substituted phosphorus ylids and also with disubstituted ylids is described.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.     

Sesquiterpenoids—27: X-ray crystallographic analysis of istanbulin-B,A 1-oxo-eremophilenolide

The stereochemistry of istanbulin-B has been defined by X-ray crystal-structure analysis. Rings A and B are transfused, with the Me groups at C(4) and C(5) cis. The α,β-unsaturated,γ -lactone ring is essentially planar. Crystals of istanbulin-B are orthorhombic, space group P2₁2₁,2₁, with a = 6.729(2), b = 13.447(3), c = 14.721(3)Â,and Z = 4. The crystal structure was determined by direct phasing and the atomic parameters were subsequently adjusted by least-squares calculations that converged at R 38% over 1179 diffractometer |F_a| values     

Synthesis,spectroscopic studies,and x-ray crystallographic analysis of the organotin carbohydrate: 1,2∶3,4-di-O-isopropylidene-6-O-triphenylstannylmethyl-α-D-galactopyranose

The title organotin carbohydrate, C₃₁H₃₆O₆Sn, has been synthesized and its molecular structure has been determined in solution and in the solid state. NMR, infrared, mass and X-ray crystallographic techniques were used. The chiral molecules crystallize in the monoclinic space group P2₁ withZ=2. The triphenyltin and carbohydrate moieties are linked by a trans methylene-oxygen-methylene arrangement. The pyranosyl ring adopts a twist-boat conformation and the isopropylidene rings adopt different (half-chair and envelope) forms. Solution and solid-state conformations are similar as only three ¹³C shift values are greater than 2ppm; the ¹¹⁹Sn value is 12 ppm.