Growth of Chlorella vulgaris on Sugarcane Vinasse: The Effect of Anaerobic Digestion Pretreatment

Microalgae farming has been identified as the most eco-sustainable solution for producing biodiesel. However, the operation of full-scale plants is still limited by costs and the utilization of industrial and/or domestic wastes can significantly improve economic profits. Several waste effluents are valuable sources of nutrients for the cultivation of microalgae. Ethanol production from sugarcane, for instance, generates significant amounts of organically rich effluent, the vinasse. After anaerobic digestion treatment, nutrient remaining in such an effluent can be used to grow microalgae. This research aimed to testing the potential of the anaerobic treated vinasse as an alternative source of nutrients for culturing microalgae with the goal of supplying the biodiesel industrial chain with algal biomass and oil. The anaerobic process treating vinasse reached a steady state at about 17 batch cycles of 24 h producing about 0.116 m³CH₄ kgCOD_vinasse ^?1. The highest productivity of Chlorella vulgaris biomass (70 mg l^?1 day^?1) was observed when using medium prepared with the anaerobic digester effluent. Lipid productivity varied from 0.5 to 17 mg l^?1 day^?1. Thus, the results show that it is possible to integrate the culturing of microalgae with the sugarcane industry by means of anaerobic digestion of the vinasse. There is also the advantageous possibility of using by-products of the anaerobic digestion such as methane and CO₂ for sustaining the system with energy and carbon source, respectively.     

Analysis of PCBs in soils and sediments by microwave-assisted extraction,headspace-SPME and high resolution gas chromatography with ion-trap tandem mass spectrometry

A procedure for the determination of seven indicator PCBs in soils and sediments using microwave-assisted extraction (MAE) and headspace solid-phase microextraction (HS-SPME) prior to GC-MS/MS is described. Optimization of the HS-SPME was carried out for the most important parameters such as extraction time, sample volume and temperature. The adopted methodology has reduced consumption of organic solvents and analysis runtime. Under the optimized conditions, the method detection limit ranged from 0.6 to 1?ng/g when 5?g of sample was extracted, the precision on real samples ranged from 4 to 21% and the recovery from 69 to 104%. The proposed method, which included the analysis of a certified reference material in its validation procedure, can be extended to several other PCBs and used in the monitoring of soil or sediments for the presence of PCBs.     

Properties of atoms in electronically excited molecules within the formalism of TDDFT

The topological analysis of the electron density for electronic excited states under the formalism of the quantum theory of atoms in molecules using time‐dependent density functional theory (TDDFT) is presented. Relaxed electron densities for electronic excited states are computed by solving a Z‐vector equation which is obtained by means of the Sternheimer interchange method. This is in contrast to previous work in which the electron density for excited states is obtained using DFT instead of TDDFT, that is, through the imposition of molecular occupancies in accordance with the electron configuration of the excited state under consideration. Once the electron density of the excited state is computed, its topological characterization and the properties of the atoms in molecules are obtained in the same manner that for the ground state. The analysis of the low‐lying singlet and triplet vertical excitations of CO and C₆H₆ are used as representative examples of the application of this methodology. Altogether, it is shown how this procedure provides insights on the changes of the electron density following photoexcitation and it is our hope that it will be useful in the study of different photophysical and photochemical processes. © 2014 Wiley Periodicals, Inc.     

Evaluation of As,Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

Three CRMs of different matrix composition were analysed, representing an environmental matrix sample (BCR–320R Channel Sediment), a botanical matrix sample (SRM 1547 Peach Leaves) and a zoological matrix sample (SRM 1566b Oyster Tissue). The element mass fractions were obtained using the KayWin program. Analytical measurement uncertainty was determined by two approaches: (1) the routine procedure applying combination of the overall uncertainty u(m) = 3.5 % and statistical uncertainty of the peak area determination and (2) the procedure applying the dedicated ERON program for calculating uncertainty. Performance of altogether 31 certified values was tested by means of calculating E _n numbers. For the remaining 52 non-certified values, comparison between uncertainties obtained by the two approaches was made. When using the first approach, the E _n number showed satisfactory performance in 28 cases; by using the second approach, the E _n number showed satisfactory performance in 27 cases. None of the unsatisfactory performances (E _n  > 1) appeared to be of systematic nature. The uncertainties obtained by applying the two approaches revealed a big extent of consistency. As the present nuclear database lacks lot of data that serve as input to the ERON program, in particular uncertainties of Q ₀ factors, estimates need to be introduced for the missing values, emphasising the urgent need to upgrade the database with missing data.     

Synergistic effect of nanoionic destabilization and partial dehydrogenation for enhanced ionic conductivity in MBH4-C60 (M = Li+, Na+) nanocomposites

Journal of Solid State Electrochemistry - In this work, we evaluate the electrochemical properties of MBH4-C60 (M = Li+, Na+) nanocomposites for potential use as a solid-state electrolyte in...     

An Insight into Kiwiberry Leaf Valorization: Phenolic Composition,Bioactivity and Health Benefits

During kiwiberry production, different by-products are generated, including leaves that are removed to increase the fruit’s solar exposure. The aim of this work was to extract bioactive compounds from kiwiberry leaf by employing microwave-assisted extraction (MAE). Compatible food solvents (water and ethanol) were employed. The alcoholic extract contained the highest phenolic and flavonoid contents (629.48 mg of gallic acid equivalents (GAE) per gram of plant material on dry weight (dw) (GAE/g dw) and 136.81 mg of catechin equivalents per gram of plant material on dw (CAE/g dw), respectively). Oppositely, the hydroalcoholic extract achieved the highest antioxidant activity and scavenging activity against reactive oxygen and nitrogen species (IC₅₀ = 29.10 μg/mL for O₂^•−, IC₅₀ = 1.87 μg/mL for HOCl and IC₅₀ = 1.18 μg/mL for ^•NO). The phenolic profile showed the presence of caffeoylquinic acids, proanthocyanidin, and quercetin in all samples. However, caffeoylquinic acids and quercetin were detected in higher amounts in the alcoholic extract, while proanthocyanidins were prevalent in the hydroalcoholic extract. No adverse effects were observed on Caco-2 viability, while the highest concentration (1000 µg/mL) of hydroalcoholic and alcoholic extracts conducted to a decrease of HT29-MTX viability. These results highlight the MAE potentialities to extract bioactive compounds from kiwiberry leaf.     

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.     

Expanding the Ligand Classes Used for Mn(II) Complexation: Oxa-aza Macrocycles Make the Difference

We report two macrocyclic ligands based on a 1,7-diaza-12-crown-4 platform functionalized with acetate (tO2DO2A²⁻) or piperidineacetamide (tO2DO2AM^Pip) pendant arms and a detailed characterization of the corresponding Mn(II) complexes. The X−ray structure of [Mn(tO2DO2A)(H₂O)]·2H₂O shows that the metal ion is coordinated by six donor atoms of the macrocyclic ligand and one water molecule, to result in seven-coordination. The Cu(II) analogue presents a distorted octahedral coordination environment. The protonation constants of the ligands and the stability constants of the complexes formed with Mn(II) and other biologically relevant metal ions (Mg(II), Ca(II), Cu(II) and Zn(II)) were determined using potentiometric titrations (I = 0.15 M NaCl, T = 25 °C). The conditional stabilities of Mn(II) complexes at pH 7.4 are comparable to those reported for the cyclen-based tDO2A²⁻ ligand. The dissociation of the Mn(II) chelates were investigated by evaluating the rate constants of metal exchange reactions with Cu(II) under acidic conditions (I = 0.15 M NaCl, T = 25 °C). Dissociation of the [Mn(tO2DO2A)(H₂O)] complex occurs through both proton− and metal−assisted pathways, while the [Mn(tO2DO2AM^Pip)(H₂O)] analogue dissociates through spontaneous and proton-assisted mechanisms. The Mn(II) complex of tO2DO2A²⁻ is remarkably inert with respect to its dissociation, while the amide analogue is significantly more labile. The presence of a water molecule coordinated to Mn(II) imparts relatively high relaxivities to the complexes. The parameters determining this key property were investigated using ¹⁷O NMR (Nuclear Magnetic Resonance) transverse relaxation rates and ¹H nuclear magnetic relaxation dispersion (NMRD) profiles.     

Synthesis and characterization of a family of layered trichalcogenides for assisted hydrogen photogeneration

Three layered trisulfides (TiS₃, ZrS₃, HfS₃) have been synthesized by solid–gas reaction between metal and sulfur in a vacuum sealed ampoule at 550 °C during 60 h. The samples used in this work were prepared from a colloidal suspension of powder of each one of the metal trisulfides (MS₃, M = Ti, Zr, Hf) in ethanol and deposited on titanium disks and quartz substrates by ”drop coating” technique. These samples have been characterized by X‐ray diffraction, energy dispersive analysis of X‐ray and scanning electron microscopy. The obtained direct optical band gaps are 1.0 ± 0.1 eV, 2.0 ± 0.1 eV and 2.2 ± 0.1 eV for TiS₃, ZrS₃ and HfS₃, respectively. Photoelectrochemical measurements in 0.5 M Na₂SO₃ have been carried out to characterize the MS₃/electrolyte interface. The flat‐band potentials (V_fb) vs. Ag/AgCl measured by electrochemical impedance spectroscopy (EIS) are –0.84 ± 0.02 V (TiS₃), –0.93 ± 0.02 V (ZrS₃) and –0.92 ± 0.02 V (HfS₃). Hydrogen generation was investigated in a photoelectrochemical cell (PEC) with MS₃ as photoanodes under white light illumination of 200 ± 20 mW/cm² at external bias potentials of 0.3 V vs. Ag/AgCl. Hydrogen evolution flows have been quantified by quadrupole mass spectrometry (QMS) reaching instantaneous values up to 19 ± 2 nmol H₂/min cm² with TiS₃ as photoanode.     

Combination of radon and stable isotope analysis as a tool for decision support concerning the remediation of NAPL-contaminated sites

The non-aqueous phase-liquid (NAPL)-contaminated aquifer at a major refinery site in Mexico was investigated. Owing to the depth of the contaminated aquifer section (NAPL source zone) of over 100 m below the surface, the actual aquifer material was not accessible for sampling. Information on the residual NAPL contamination of the aquifer could only be obtained indirectly by analysing groundwater samples from a few wells available at the site. To tackle the problem, an approach alternative to conventional groundwater analysis for dissolved NAPL was chosen. For evaluating the recent contamination and estimating its probable future development, the radioisotope radon-222 and the stable isotopes 13C, 34S and 18O were used as naturally occurring contamination tracers and process indicators. Radon was used as partitioning tracer for the approximate localization and semi-quantitative assessment of the NAPL source zone. The stable isotopes were used as indicators for naturally occurring biodegradation processes, which might potentially be implemented into future remediation schemes.