The vapour pressures and saturated volumes of benzotrifluoride in the temperature range 460–530K.

A sample of benzotrifluoride was degassed in a high vacuum train, and the vapor pressure was measured in the temperature range 460 – 53OK. Also the saturated vapour and saturated liquid volumes were measured. Two simple equations were used to fit the vapour pressure data by the least square method. The heat of vaporization was calculated using Clapeyron equation.     

Enaminones in heterocyclic synthesis: Synthesis and chemical reactivity of 3‐anilino‐1‐substituted‐2‐propene‐1‐ one

The 3‐anilinoenones 3a,b were prepared from the corresponding 3‐dimemyl‐aminopropenones. The reactivity of 3a,b towards a variety of carbon and nitrogen nucleophiles as well as naphthoquinones is reported.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Separation of strontium from simulated waste in K2SO4/Nitrate medium containing Sr2+, Eu3+, Ce3+, Pd2+, Rh3+, Ru3+, UO 2 2+ , Fe3+, Cr3+, Ni2+, Al3+, Ca2+ and Cs+, by strongly basic anion exchanger

In this work Strontium was separated selectively form, Pd²⁺, Ni²⁺ and Ca³⁺ using anionic resins of Amberlite type IRA-900 and IRA-410 from nitrate medium. The Separation of strontium by strongly basic anion exchangers IRA-410 and IRA-900 from simulated waste containing, Sr²⁺, Eu³⁺, Ce³⁺, Pd²⁺, Rh³⁺, Ru³⁺, VO₂ ²⁺, Fe³⁺, Cr³⁺, Ni²⁺, Al³⁺, Ca²⁺, and Cs⁺, in K₂SO₄/nitrate medium which adsorbed as strontium sulphate complex was achieved through ligand- ligan exchange. The elution of strontium carried out via “loading” the column with a solution of 0.03N EDTA in presence of 0.1N NaNO₃ at pH7 where Sr²⁺ has low K_d value. An inductively Coubled Plasma — Optical Emission Spectrometry (ICP — OES) of ARL type model 3520, was used for elemental analysis.     

Spectrophotometric determination of palladium using arsenazo I

A new simple rapid method for the spectrophotometric determination of palladium using arsenazo I is given. The optimum conditions favoring the formation of the complex are extensively investigated; the molecular structure was found to be 1:1. Beer's law is obeyed for the ranges 1.0–10.6 or 0.64–6.39 ppm of Pd.     

Determination of hypophosphite and phosphite by their reduction of iodine,iodate, or periodate and mercury(I) titration of iodide

A new potentiometric method is adopted for the accurate determination of hypophosphite and phosphite alone or in their mixtures using alcoholic iodine, iodate, and periodate. Hg(I) was used as titrant for the produced iodide in case of using alcoholic iodine as oxidant or for the excess added iodide in case of iodate and periodate as oxidants using silver amalgam as the indicatior electrode. The potential breaks which average 300 mV per 0.1 ml of titrant were sharp enough for precise determination of endpoints, and hence the high accuracy of the present method.     

The acid-base properties of solochrome violet R. S.

Summary The acid base properties of solochrome violet R.S. has been studied with the object of testing its use as an acid base indicator or as a colorimetric reagent. The pk values of 4.35, 7.4, and 9.45 corresponding to the three steps of ionisation of the free acid were evaluated by the aid of the relation between log (acid)/(salt) and ph values obtained during the course of the potentiometric titration of the free acid with a free base. The dye has proved to be a suitable indicator in titrating some mineral and organic acids as well as a colorimetric reagent for the microdetermination of vanadium.     

Allene cross-metathesis: synthesis of 1,3-disubstituted allenes

[reaction: see text] Grubbs catalyst, Cl2(Cy3P)2Ru=CHPh, was found to catalyze the cross-metathesis of monosubstituted allenes to 1,3-disubstituted allenes in varying yields.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.