Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Synthesis and structure of two lanthanide complexes with isonicotinic acid N-oxide (HL): [Ln(L)2(H2O)4]n·(NO3)n·n(H2O) (Ln = Sm or Tb)

Two new lanthanide complexes of isonicotinic acid N-oxide (HL), namely [Ln(L)₂(H₂O)₄]_n·(NO₃)_n·n(H₂O) for Ln = Sm or Tb, have been synthesized and characterized by spectroscopic and crystallographic methods. IR spectra suggest that isonicotinic acid N-oxide acts as a O,O′-bidentate ligand, the N-oxide group as well as the nitrate group are not involved in coordination. Single crystal analyses have shown that both complexes are isomorphous, where the Ln(III) centers are eight coordinated by four O atoms of four water ligands and other four O atoms of two isonicotinic acid N-oxide ligands. The carboxylate groups are only involved in the bidentate syn–syn bridging mode into infinite chains. Hydrogen bonds between aqua ligands, lattice molecules, nitrate and N-oxide groups are formed giving a three-dimensional network.     

Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.     

Capillary electrochromatography with monolithic stationary phases: 1. Preparation of sulfonated stearyl acrylate monoliths and their electrochromatographic characterization with neutral and charged solutes

A novel monolithic stationary phase having long alkyl chain ligands (C17) was introduced and evaluated in capillary electrochromatography (CEC) of small neutral and charged species. The monolithic stationary phase was prepared by the in situ copolymerization of pentaerythritol diacrylate monostearate (PEDAS) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a ternary porogenic solvent consisting of cyclohexanol/ethylene-glycol/water. While AMPS was meant to support the electroosmotic flow (EOF) necessary for transporting the mobile phase through the monolithic capillary, the PEDAS was introduced to provide the nonpolar sites for chromatographic retention. Monolithic columns at various EOF velocities were readily prepared by conveniently adjusting the amount of AMPS in the polymerization solution as well as the composition of the porogenic solvent. The monolithic stationary phases thus obtained exhibited reversed-phase chromatography behavior toward neutral solutes and yielded a relatively strong EOF. For charged solutes (e.g., dansyl amino acids), nonpolar as well as electrostatic interaction/repulsion with the monoliths were observed in addition to electrophoretic migration. Therefore, for charged solutes, selectivity and migration can be readily manipulated by changing various parameters including the nature of the monolith and the composition of the mobile phase (e.g., pH, ionic strength and organic modifier). Ultrafast separation on the time scale of seconds of 17 different charged and neutral pesticides and metabolites were performed using short capillary columns of 8.5 cm x 100 microm ID.     

Miniemulsion copolymerization of styrene–methyl methacrylate

Miniemulsion copolymerization of 50 : 50 weight fraction of styrene–methyl methacrylate monomer, using hexadecane as the cosurfactant, was carried out in both unseeded and seeded polymerizations. Effects of the hexadecane concentration and the ultrasonification time on the conversion–time curves and particle size of the final latex were investigated for unseeded polymerization. The kinetic and particle size distribution results showed that an increase in hexadecane concentration and ultrasonification time cause faster polymerization rate and smaller particle size. The mechanism of mass transport from miniemulsion droplets to polymer particles was also investigated for seeded polymerization. For this purpose a monomer miniemulsion was mixed with a fraction of a previously prepared miniemulsion latex particles prior to initiation of polymerization, using residual oil-soluble initiator in the seed latex. The concentration of hexadecane and a water-insoluble inhibitor (2,5 di-tert-butyl hydroquinone) in the miniemulsions were the main variables. Seeded polymerizations were also carried out in the presence of miniemulsion droplets containing a water-insoluble inhibitor and water-soluble initiator. The inhibitor concentration and the agitation speed during the course of polymerization were the experimental variables. The kinetic and particle size results from these seeded experiments suggested that collision between miniemulsion droplets and polymer particles may play a major role in the transport of highly water-insoluble compounds.     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Synthesis of Some New Heterobicyclic Nitrogen Systems Bearing 7H‐1,2,4‐Triazolo[1,5‐d]tetrazol‐6‐yl Moiety for Biological Interest

Reaction of 6‐mercapto‐7H‐1,2,4‐triazolo[1,5‐d]tetrazole ( 1 ) wtih 1,2‐phenylenediamine afforded N‐{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,2‐phenylenediamine which was cyclized to benzimidazolyl‐1,2,4‐triazolo[1,5‐d]tetrazoles using various one‐carbon cyclizing agents. Also, the treatment of 1 with maleic anhydride or phthalic anhydride gave the corresponding thio derivatives followed by hydrazinolysis to afford the thio heterobicyclic systems. Former structures of the products have been established upon elemental and spectral analyses.     

LC-ESI-MS/MS profiling of alkaloids and antiproliferative activity of Pachypoduim lamerei drake leaves

Abstract

In the present study, evaluation of the antiproliferative activity of Pachypodium lamerei Drake leaves (family Apocyaceae) against human breast cancer cell lines MDA-MB-231 was done for the total methanolic extract, crude alkaloidal mixture and ursolic acid using the MTT colorimetric assay. The methanolic extract showed the strongest antiproliferative activity followed by ursolic acid and crude alkaloidal fraction with an IC₅₀ equal to 6.2, 14.55 and 56.3?µg/ml respectively compared to oleocanthal. It is the first record for the LC/ESI-MS/MS alkaloidal profiling of the leaves of P. lamerei. Seven alkaloids were tentatively identified according to their fragmentation patterns. Four alkaloids were related to the parent indole class and two alkaloids belong to the quinoline class in addition to one steroidal alkaloid with a pregnan nucleus. Phytochemical investigation of the methanolic extract led to the isolation of three triterpenoidal compounds including ursolic acid, 11,12-didehydroursolic acid lactone and ursolic acid lactone.     

Study of bioadhesion on a flat plate with a yeast/glass model system

The attachment of microorganisms to a surface is a critical first step of biofilm fouling in membrane processes. The shear-induced detachment of baker's yeast in adhesive contact with a plane glass surface was thus experimentally studied, using a specially designed shear stress flow chamber. The yeast was marketed either as rod-shaped pellets (type I yeast) or as spherical pellets (type II yeast). A complete series of experiments for measuring the shear stress necessary to detach a given proportion of individual yeast cells of type I or II was performed under different environmental conditions (ionic strength, contact time). In parallel, the surface physicochemical properties of the cells (surface charge, hydrophobicity, and electron donor and electron acceptor components) were determined. For the first type of yeast cells, which were rather hydrophilic, adhesion to the glass plate was weak. This was due to both electrostatic effects and hydrophilic repulsion. Furthermore, adhesion was not sensitive to any variation of the ionic strength. For yeast of the second type, adhesion was drastically increased. This could be explained by their physicochemical surface properties and especially their hydrophobic and electron acceptor components, which caused strong attractive van der Waals and Lewis acid-base interactions, counterbalancing the electrostatic repulsion. For increasing ionic strengths, adhesion was greater, due to lower electrostatic repulsion. The results were quantified through the definition of a critical wall shear stress ( tau w 50% ) required to detach 50% of the yeast cells initially deposited on the glass surface. The influence of the contact time was also evaluated and it was shown that, whatever the type of yeast, macromolecules such as proteins were released into the extracellular medium due to cell lysis and could contribute to the formation of a conditioning film. As a result, the cells were more strongly stuck to the glass plate.     

Studies with enaminones: The reaction of enaminones with aminoheterocycles. A route to azolopyrimidines,azolopyridines and quinolines

The enaminones 1b,d,f react with 4‐phenyl‐3‐methyl‐5‐pyrazoleamine 3a to yield the pyrazole derivatives 4a‐c that cyclised readily on reflux in pyridine solution in presence of hydrochloric acid to yield the pyrazolo[1,5‐a]pyrimidines 5a‐c. Similarly 3(5)‐amino‐1H‐triazole (3b) reacted with 1b,d,f to yield the triazolo[1,5‐a]pyrimidines 5d‐f. In contrast attempted condensation of the 5‐tetrazoloamine (3c) with 1a,d,e resulted in its trimerisation and only triaroylbenzene 8a,d,e was isolated. The reaction of 1a,b,d with anthranilonitrile 9a and the reaction of 1a‐c with the 2‐aminocyclohexene thiophene‐3‐nitrile 10a afforded the cis enaminones 11a‐c and 12a‐c. Similarly, reaction of 1a‐c with the methylanthranilate 9b and reaction of 1b,e with ethyl 2‐aminocyclohexene thiophene‐3‐carboxylate 10b afforded the cis enaminones 11d‐f and 12d,e respectively. Attempted cyclization of 11a‐c into quinoline failed. Successful cyclization of 11d into the quinolinone 13 could be affected, on heating for five minutes in a domestic microwave oven at full power. The reaction of 1a‐c,f with piperidine afforded the trans enaminones 14a‐d. Similarly, trans 14e was formed from the reaction of 1b with morpholine. The coupling reaction of 1b with excess of benzene diazonium chloride afforded the formazane 16. The enaminone 2 reacted with heterocyclic amines to yield the pyridones 17,18.