Kinetic and thermodynamic studies on ligand substitution reactions and base-on/base-off equilibria of cyanoimidazolylcobamide, a vitamin B12 analog with an imidazole axial nucleoside

Ligand substitution reactions of the vitamin B12 analog cyanoimidazolylcobamide, CN(Im)Cbl, with cyanide were studied. Cyanide substitutes imidazole (Im) in the alpha-position more slowly than it substitutes dimethylbenzimidazole in cyanocobalamin (vitamin B12). The kinetics of the displacement of Im by CN- showed saturation behaviour at high cyanide concentration; the limiting rate constant was found to be 0.0264 s(-1) at 25 degrees C and is characterized by the activation parameters: DeltaH(not =) = 111 +/- 2 kJ mol(-1), DeltaS(not =) = +97 +/- 6 J K(-1) mol(-1), and DeltaV(not =) = +9.3 +/- 0.3 cm3 mol(-1). These parameters are interpreted in terms of an I(d) mechanism. The equilibrium constant for the reaction of CN(Im)Cbl with CN- was found to be 861 +/- 75 M(-1), which is significantly less than that obtained for the reaction of cyanocobalamin with CN- (viz. 10(4) M(-1)). pKbase-off for the base-on/base-off equilibrium was determined spectrophotometrically and found to be 0.99 +/- 0.05, which is about 0.9 pH units higher than that obtained previously in the case of cyanocobalamin. In addition, the kinetics of the base-on/base-off reaction was studied using a pH-jump technique and the data obtained revealed evidence for an acid catalyzed reaction path. The results obtained in this study are discussed in reference to those reported previously for cyanocobalamin.     

Kinetics and mechanism of oxidation of 4-oxoacids by N-bromosuccinimide in aqueous acetic acid medium

Kinetics and mechanism of oxidation of substituted and unsubstituted 4-oxoacids (S) by N-bromosuccinimide (NBS) in aqueous acetic acid medium have been studied potentiometrically. The reaction follows first-order kinetics, each in 4-oxoacids, NBS and H⁺. The effect of changes in the electronic nature of the substrate reveals that there is a development of positive charge in the transition state. Based on the kinetic results and the product analysis, a suitable mechanism has been proposed for the reaction of NBS with 4-oxoacids.     

Determination of trace elements in Egyptian molasses by instrumental neutron activation analysis

Multielement neutron activation analysis has been applied to the determination of macro, micro and trace amounts of Al, Br, Ca, Cl, Co, Cr, Cs, Fe, K, La, Mg, Mn, Na, Rb, Sc and V in molasses of Kom Ombo, Edfu, Armant, Naga Hammady and Abu Korkass cane sugar factories. The threshold element concentrations are acceptable and below the safety. Differences in element concentrations may be related to different botanic textures and structures, different compositions of sugar cane plants, corrosion of containers or changes in soil as a result of geochemical differentiation. The method is sensitive down to 0.038 ppm of V. The relative errors due to counting statistics are in the range of 0.2–11%.     

Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003     

Mixed ligand complexes of diaquo (2,2′-bipyridine)palladium(II) with cyclobutane-1,1-dicarboxylic acid and DNA constituents

Complex formation equilibria involving [Pd(bpy)(H₂O)₂]²⁺ (bpy = 2,2-bipyridine) and the cyclobutanedicarboxylate ligand (cbdca), ethylenediamine and DNA have been investigated. Mixed ligand complexes of [Pd(bpy)(cbdca)] with inosine, inosine-5-monophosphate (5-IMP), uracil, uridine and adenine have been studied. The results show ring opening of the cbdca and monodentate chelation of the DNA components. Stoichiometries and stability constants for the complexes were determined at 25 °C and at constant 0.1 M ionic strength (adjusted using NaNO₃). The coordination sites were found to be pH-dependent. The [Pd(bpy)Cl₂], [Pd(bpy)(cbdca)] and [Pd(bpy)(inosine)](NO₃) complexes were isolated.     

The chemistry of the azanonaborane cluster RNH2---B8H11NHR

The preparation and properties of the R¹R²NH---B₈H₁₁NHR cluster are described. The cluster is stable to aqueous solutions and can be made water-soluble by the introduction of a few hydrophilic groups. This makes the cluster a good candidate as the boron moiety in compounds for boron neutron capture therapy. The chemistry of the cluster preparation, the stability of the cluster, and conditions for reactions of the organic moieties are reviewed. Pyridine derivatives of the cluster show electronic interaction between the cluster and the pyridine.     

Epoxy-amine multimethacrylic prepolymers,kinetic and structural studies

Epoxy-amine methacrylated prepolymers are prepared in a 1-step synthesis by the reaction of Bisphenol A diglycidyl ether, glycidyl methacrylate, and different diamines. The adaptation of these reactions to production processes with a reduced reaction time requires a kinetic control and the use of efficient catalysts. The comparative kinetic treatment of the epoxy-amine reaction in the frame of Horie's and Rozenberg's kinetic schemes have been made. Cases where an efficient acid catalyst is used are also examined. Structural studies of these reactions established the occurrence of a Michael amine/double bond addition, when some amines are used. © 1995 John Wiley & Sons, Inc.     

The structure of the diazonium coupling products of phenacyl thiocyanate and phenacyl selenocyanate with diazotized 3-phenyl-5-aminopyrazole

The reaction of diazotized 3-phenyl-5-aminopyrazole with phenacyl thiocyanate 1a and phenacyl selenocyanate 1b afforded directly 2-imino-3-(3-phenyl-5-pyrazolyl)-5-benzoyl-2,3-dihydro-1,3,4-thiadiazole monohydrate 9a and 2-imino-3-(3-phenyl-5-pyrazolyl)-5-benzoyl-2,3-dihydro-1,3,4-selenadiazole monohydrate 9b , respectively. The products 9a and 9b were also obtained from the reaction of C-benzoyl-N-(3-phenyl-5-pyrazolyl)formohydrazidoyl bromide 10 with potassium thiocyanate and potassium selenocyanate, respectively. Acetylation, benzoylation, and nitrosation of 9 afforded the corresponding diacetyl, dibenzoyl, and nitroso derivatives 11-13 , respectively. Cyclization of C-benzoyl-N-(3-phenyl-5-pyrazolyl)-nitrilimine 6 was shown to give the pyrazolo [5,1-d]triazole 8 and not the pyrazolo[5,1-c]-as-triazine derivative 7 , as previously reported.     

Crystal structure and spectroscopic study of di-μ(1,1)-azido-di-μ(0,0-nitrato)tetrakis(3,5-lutidine)dicopper(II), [Cu(N3) (NO3) (3,5-lutidine)2]2

A mixed ligand 12 complex of copper(II) azide with 3,5-lutidine, namely di-(1,1)-azido-di(0,0)-nitrato)tetrakis(3,5-lutidine)dicopper(II) has been prepared and characterized by X-ray crystallographic and spectroscopic methods. The dimeric molecule, which possesses a crystallographic inversion center, contains two(1,1) bridging azido ligands. Each copper(II) atom in the cyclic Cu₂N₂ unit is further coordinated by two oxygen atoms from two(0,0-nitrato) bridges at Cu-O distances of 2.465(3) and 2.568(3) Å and two nitrogen atoms from the lutidine molecules [Cu-N=2.003(3) and 2.012(3) Å] to give a distorted tetragonal bipyramid. Both azido ligands are linear [N-N-N angle=179.0(4) and asymmetric N-N=1.207(4) and N-N=1.135(5) Å]. The azido bridges produce a rather short Cu Cu distance of 3.013(2) Å. Infrared and electronic data are presented and discussed.     

Metal chelates of thiazole-2-ylthiourea

Summary The formation constants of 1-phenyl-3-thiazole-2-ylthiourea complexes with some bivalent metal ions (Cu^II, Ni^II, Zn^II and Mn^II) have been determined in 75% EtOH–H₂O. Complexes of Cu^II, Ni^II, Zn^II, Hg^II and Pd^II have been isolated and characterized by conductance, i.r., electronic spectra and magnetic measurements. The ligand forms ML complexes with Cu^II and Hg^II and ML₂ with Ni^II, Zn^II and Pd^II, where L is the uninegatively charged bidentate ligand and binds through the ring nitrogen and thiocarbonyl sulphur atoms.