Development of nanofibrillated cellulose coated with gold nanoparticles for measurement of melamine by SERS

The objective of this study was to develop nanofibrillated cellulose (NFC)-based substrate for rapid detection of melamine in milk by surface-enhanced Raman spectroscopy (SERS). NFC were served as a highly porous platform to load with gold nanoparticles (AuNPs), which can be used as a flexible SERS substrate with nanoscale roughness to generate strong electromagnetic field in SERS measurement. The NFC/AuNP substrate was characterized by UV–Vis spectroscopy and electron microscopy. Milk samples contaminated by different concentrations of melamine were measured by SERS coupled with NFC/AuNP substrate. The spectral data analysis was conducted by multivariate statistical analysis [i.e. partial least squares (PLS)]. Satisfactory PLS result for quantification of melamine in milk was obtained (R = 0.9464). The detection limit for melamine extracted from liquid milk by SERS is 1 ppm, which meets the World Health Organization’s requirement of melamine in liquid milk. These results demonstrate that NFC/AuNP substrate has improved homogeneity and can be used in SERS analysis for food safety applications.     

Dynamic shearing resistance of molten metal films under high pressures and extremely high shearing rates

In the present study plate-impact pressureshear experiments have been conducted to study the dynamic shearing resistance of molten metal films at shearing rates of approximately 10⁷ s⁻¹. These molten films are generated by pressure-shear impact of relatively low melt-point metals such as 7075-T6 Al alloy with high hardness and high flow-strength tool-steel plates. By employing high impact speeds and relatively smooth impacting surfaces, normal interfacial pressures ranging from 1–3 GPa and slip speeds of over 100 m/s are generated during the pressure-shear loading. The resulting friction stress (∼100 to 400 MPa) combined with the high slip speeds generate conditions conductive to interfacial temperatures approaching the fully melt temperature regime of the lower melt-point metal (7075-T6 aluminum alloy) comprising the tribo-pair. During pressure-shear loading, laser interferometry is employed to measure normal and transverse motion at the rear surface of the target plate. The normal component of the particle velocity provides the interfacial normal traction while the transverse component provides the shearing resistance of the interface as it passes through melt. In order to extract the critical interfacial parameters, such as the interfacial slip-speed and interfacial temperatures, a Lagrangian finiteelement code is developed. The computational procedure accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below melt the flyer and target materials are described as an isotropic thermally softening elastic-viscoplastic solid. For material elements with temperatures in excess of the melt point, a purely Newtonian fluid constitutive model is employed. The results of this hybrid experimental-computational study provide insights into the dynamic shearing resistance of molten metal films at high pressures and extremely high shearing rates.     

Distance‐dependent Enhancement in Raman Spectroscopy Probed by Conjugated Molecules with Different Molecular Lengths

In this study, the distance‐dependent enhancement effect in surface‐enhanced Raman scattering (SERS) was explored with molecules bearing different lengths of conjugated double bonds. These conjugated molecules were synthesized utilizing the diazotization‐coupling reaction allowing a thio group on one end and a nitro group on the other end. The thiol group allows the probed molecule to chemisorb on the surface of silver nanoparticles (AgNPs). The opposite end of each molecule contains a nitro group, which gives an intense SERS signal to show a fair and accurate comparison of the effect of chain length. The obtained SERS intensities were correlated with the chain lengths of these synthesized molecules, which ranged from 0.6 to 2.0 nm between the nitro and thiol groups. Based on these results, the electromagnetic field effect was mainly responsible for the signal enhancements in SERS measurements. Also, the obtained signals were exponentially decayed due to the distances of the surface of AgNPs. Based on the SERS intensities of the conjugated molecules, the contribution of CT effect to SERS for these examined molecules were limited.     

Biosynthesis of Ribostamycin Derivatives by Reconstitution and Heterologous Expression of Required Gene Sets

Ribostamycin is a 4,5-disubstituted 2-deoxystreptamine (DOS)-containing aminoglycoside antibiotics and naturally produced by Streptomyces ribosidificus ATCC 21294. It is also an intermediate in the biosynthesis of butirosin and neomycin. In the biosynthesis of ribostamycin, DOS is glycosylated to generate paromamine which is converted to neamine by successive dehydrogenation followed by amination, and finally ribosylation of neamine gives ribostamycin. Here, we report the biosynthesis of 6′-deamino-6′-hydroxyribostamycin (a ribostamycin derivative or pseudoribostamycin) in Streptomyces venezuelae YJ003 by reconstructing gene cassettes for direct ribosylation of paromamine. A trace amount of pseudoribostamycin was detected with ribostamycin in the isolates of ribostamycin cosmid heterologously expressed in Streptomyces lividans TK24. It has also indicated that the ribosyltransferase can accept both neamine and paromamine. Thus, the present in vivo modification of ribostamycin could be useful for the production of hybrid compounds to defend against bacterial resistance to aminoglycosides.     

A hybrid model for selection of an outsourcing provider

Outsourcing is a good strategy for firms that need to reduce operating costs and improve competitiveness and it is important that firms scientifically select appropriate outsourcing providers. Some efforts have been made to find systematic ways to deal with outsourcing problems, but these efforts incorrectly assumed that the criteria used in the decision process are independent, which is not true in the real world. In this study, we propose a new hybrid multiple criteria decision-making (MCDM) model, which addresses the dependent relationships between the various criteria. The relations-structure among the criteria is built with the aid of the decision-making trial and evaluation laboratory (DEMATEL) method. Decision-makers tend to hold diverse opinions about their preferences due to incomplete information and knowledge, or inherent conflict between various departments. We further used the fuzzy preference programming and the analytic network process (ANP) to form a model for the selection of partners for outsourcing providers. The proposed model can help practitioners improve their decision making process, especially when criteria are numerous and inter-related. The method is demonstrated using data from a Taiwanese airline.     

Scanning photoemission spectromicroscopic study of 4-nm ultrathin SiO(3.4) protrusions probe-induced on the native SiO(2) layer

Atomic force microscopy probe-induced large-area ultrathin SiO(x) (x ≡ O/Si content ratio and x > 2) protrusions only a few nanometers high on a SiO(2) layer were characterized by scanning photoemission microscopy (SPEM) and X-ray photoemission spectroscopy (XPS). SPEM images of the large-area ultrathin SiO(x) protrusions directly showed the surface chemical distribution and chemical state specifications. The peak intensity ratios of the XPS spectra of the large-area ultrathin SiO(x) protrusions provided the elemental quantification of the Si 2p core levels and Si oxidation states (such as the Si(4+), Si(3+), Si(2+), and Si(1+) species). The O/Si content ratio (x) was evidently determined by the height of the large-area ultrathin SiO(x) protrusions.     

Synthesis and properties of new soluble triphenylamine‐based aromatic poly(amine amide)s derived from N,N′‐bis(4‐carboxyphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic dicarboxylic acid, N,N′‐bis(4‐carboxyphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was synthesized by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluorobenzonitrile, followed by the alkaline hydrolysis of the intermediate dinitrile compound. A series of novel triphenylamine‐based aromatic poly(amine amide)s with inherent viscosities of 0.50–1.02 dL/g were prepared from the diacid and various aromatic diamines by direct phosphorylation polycondensation. All the poly(amine amide)s were amorphous in nature, as evidenced by X‐ray diffractograms. Most of the poly(amine amide)s were quite soluble in a variety of organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with glass‐transition temperatures up to 280 °C, 10% weight‐loss temperatures in excess of 575 °C, and char yields at 800 °C in nitrogen higher than 60%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 94–105, 2003     

Measurement of curved surface by stereo vision and error analysis

Using the advantage of reconstructing the surface of a body, the stereo vision is used to study the measurement of a curved surface, and the error of the measurement is analyzed. Under the world coordinate X–Y–Z erected by the stereo vision, the surface of the cylinder is measured, and the position coordinate of each point on the cylindrical surface is determined. By the use of the nonlinear optimization technique, the equation of cylindrical surface is solved to obtain a set of parameters: the direction cosine of the centerline of the cylinder, the point of intersection of the centerline of the cylinder with the XZ-plane, and the radius of the cylinder. The computed radius of the cylinder is compared to the measured value to evaluate the measurement error. Through coordinate transformation, the measured position coordinate of each point on the cylindrical surface, which is in the rectangular coordinate, is transformed into the cylindrical coordinate. The radial coordinate of each point is compared to the computed radius and the mean error and standard deviation are estimated. Results indicate that the stereo vision may accurately measure the curved surface in various curvatures, and a cylindrical coordinate system may be erected for the measured cylinder. Hence, the analysis method proposed in the paper may be further applied to study the deformation problems such as piping under pressure, and fracture problems such as piping with cracks.     

Radiative transfer in a multi-layer medium with Fresnel interfaces

The discrete-ordinate method using composite quadrature is further extended to the analysis of radiative transfer in a multi-layer medium with Fresnel interfaces. Since the discrete ordinates used in the present method depend on the critical angles at the interfaces and the integral over direction is split into several subintervals by the critical angles, the discrete ordinates for each of the layers may be different. Thus, in general the radiation intensity on a discrete ordinate of one of the layers can not be obtained directly from the intensity on the discrete ordinate of the others. To circumvent the difficulty, the natural cubic spline interpolation is used to approximate the angular distribution of intensity at internal interfaces. The comparisons of the present results and the existing results for some special cases show that the present scheme works well. The effects of refractive indices and scattering albedos on the hemispherical reflectivity and transmissivity of a three-layer medium with Fresnel interfaces are discussed.     

Flow fields in a simulated axisymmetric terminal aneurysm with symmetric and asymmetric outflows

Laser-Doppler velocimetric measurements and flow visualization were performed in a glass axisymmetric aneurysm model with symmetric and asymmetric outflows through the branches. The bifurcation angle was fixed at 140°, and the Reynolds number based on the steady bulk average velocity and diameter of the affarent conduit was 500. The flow characteristics such as flow separation in the afferent conduit and flow activity inside the aneurysm for the symmetric and asymmetric outflow cases were compared in detail, and the case that is susceptible to thrombosis was identified. In addition, the onset of transition from laminar to turbulent flow inside the aneurysm was evidenced by the presence of vortex breakdown and the steep increase in the fluctuation level. Finally, the effect of pulsation on the flow pattern in the aneurysm was examined.