Radiation induced copolymerization reactivity of different allyl monomers with styrene

Radiation induced copolymerizations of electron donating such as allyl phenol (AP) and electron withdrawing such as allyl isothiocyanate (AITC) monomers with styrene (Sty) as a comonomer were studied in order to correlate the electronic behavior with copolymerization yield and molecular weight. The allyl monomers and comonomer were mixed in the same mol ratios under Ar atmosphere and copolymerized by using gamma radiation in various absorbed doses (55, 110, 165 kGy) obtained from a Co-60 source. Poly(AP-co-Sty), and poly(AITC-co-Sty) could have been prepared at all of the absorbed doses. The maximum copolymerization yields were calculated as a 16.35 and 6.52 percent for poly(AP-co-Sty) and poly(AITC-co-Sty), respectively. The molecular weights of poly(AP-co-Sty) copolymers are found to be higher in comparison to those of poly(AITC-co-Sty). Both results indicate that, under the same irradiation conditions, AP is more reactive on styrene than AITC is. Thus, the monomers having electron withdrawing (EW) substituents attached to allyl group may result in better copolymerization yield and molecular weight than those with electron donating (ED) substituents. Thermal stabilities of the poly(AP-co-Sty) copolymers are also higher than those of poly(AITC-co-Sty).     

Complexation and transport of amino acid esters and their salts with synthesised chiral novel aza crown ether derivatives

The syntheses of four aza-15-crown-5 ethers bearing phenyl and phenoxymethyl moieties attached to a stereogenic centre on the crown ring were achieved. Macrocycles have exhibited strong binding ability (K_a = 5364–12,969 M^? 1) and modest enantiomeric discrimination towards the enantiomers of amino acid methyl ester salts by UV titration method in CHCl₃ at 25°C. Computer modelling results supported experimental data providing a detailed understanding of the molecular recognition mode between hosts and guests and the likely binding sites involved. Macrocycles were used for chiral discrimination of amino acids in their zwitterionic forms or as potassium and sodium salts in transport experiments across a bulk chloroform membrane with satisfactory selectivity.     

NONLINEAR DYNAMIC ANALYSIS OF A LAMINATED HYBRID COMPOSITE PLATE SUBJECTED TO TIME-DEPENDENT EXTERNAL PULSES

Nonlinear dynamic responses of a laminated hybrid composite plate subjected to time-dependent pulses are investigated. Dynamic equations of the plate are derived by the use of the virtual work principle. The geometric nonlinearity effects are taken into account with the von Kármán large deflection theory of thin plates. Approximate solutions for a clamped plate are assumed for the space domain. The single term approximation functions are selected by considering the nonlinear static deformation of plate obtained using the finite element method. The Galerkin Method is used to obtain the nonlinear differential equations in the time domain and a MATLAB software code is written to solve nonlinear coupled equations by using the Newmark Method. The results of approximate-numerical analysis are obtained and compared with the finite element results. Transient loading conditions considered include blast, sine, rectangular, and triangular pulses. A parametric study is conducted considering the effects of peak pressure, aspect ratio, fiber orientation and thicknesses.     

Chaotic dynamics of resistively coupled DC-driven distinct Josephson junctions and the effects of circuit parameters

Two distinct Josephson junctions (JJs) connected with a constant coupling resistance R_cp are theoretically considered to investigate the overall dynamics below and above the critical current I_c. The circuit model of the device is driven by two DC current sources, I₁ and I₂. Each junction is characterized by a nonlinear resistive–capacitive junction (NRCSJ). Having constructed the circuit model, time-dependent simulations are carried out for a variety of control parameter sets. Common techniques such as bifurcation diagrams, two-dimensional attractors and Lyapunov exponents are applied for the determination of chaotic as well as periodic dynamics of the superconducting junction devices. According to the findings, two states (namely superconducting and ordinary conducting) are determined as functions of the source currents. The chaotic current which flows through R_cp exhibits a very rich behavior depending on the source currents I₁ and I₂ and junction capacitances C₁ and C₂. The device characteristics are summarized by a number of three-dimensional phase diagrams in the parameter space. In addition, for certain parameters, hyper-chaotic cases with two positive Lyapunov exponents are encountered. In contrast to earlier studies claiming the need for a sinusoidal feeding current for generating a chaotic signal, our circuitry can easily generate one via a DC source.     

Investigation of spectroscopic studies and DFT calculations on glucofuranose derivatives of dithiophosphonates

Abstract

2,4-Bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide (Lawesson’s reagent: LR) was reacted with 1,2:5,6-di-O-cyclohexylidene-α-D-glucofuranose and 1,2:5,6-di-O-isopropylidene-α-D-glucofuranose in toluene and gave rise to crude dithiophosphonic acids. The crude dithiophosphonic acids were treated with excess triethylamine and the triethylammonium salts of dithiophosphonic acids (1) and (2) were isolated by crystallization method. Compounds 1 and 2 were characterized by elemental analysis, IR, and NMR (¹H-, ¹³C- and ³¹P-) spectroscopies and mass spectrometry. In addition, NMR spectra, the electronic properties (the electronic chemical potential, electronegativity, chemical hardness and the global electrophilicity index) and NBO analysis of compound 2 have been calculated by using the Gaussian 16?W program. The electronic properties were calculated using Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energies by density functional method (DFT/B3LYP) at 6-31G(d,p) level. The HOMO and LUMO energies are ?5.9 and ?0.72?eV, respectively. The HOMO–LUMO energy difference is 5.18?eV and this value shows that compound 2 has a high stability and low reactivity.     

3-Tetrahydrofurfuryloxy-2-Hydroxypropyl Methacrylate: Synthesis,Characterization, Homopolymerization,and Copolymerization

Abstract

3-Tetrahydrofurfuryloxy-2-hydroxypropyl methacrylate monomer was prepared from methacrylic acid, tetrahydrofurfuryl alchol, and epichlorhydrin. Homopolymerization and copolymerization with (2-phenyl-1,3-dioxolane-4-yl)methyl methacrylate and N-vinyl pyrrolidone monomers were carried out in 1,4-dioxane solution at 60°C using benzoyl peroxide as initiator. Infrared, proton and carbon-13 nuclear magnetic resonance techniques were used in characterizations of the monomer, the homopolymer and the copolymers were determined by DSC technique. The copolymer compositions were estimated from 1H-NMR spectra. The reactivity ratios in copolymerization of 3-tetrahydrofurfuryloxy-2-hydroxypropyl methacrylate and (2-phenyl-1,3-dioxolane-4-yl) methyl methacrylate were calculated by both Kelen-Tüdos and Fineman-Ross methods.     

A Grafting Study on Partially Dehydrochlorinated Poly(vinyl chloride) by Atom Transfer Radical Polymerization

HCl elimination in low ratio was first carried out from poly(vinyl chloride) to increase allylic chlorines. Partially dehydrochlorinated poly(vinyl chloride), having a macroinitiator effect, was grafted with tert‐butyl methacrylate via atom transfer radical polymerization in the presence of CuBr/2,2′‐bipyridine at 64°C in tetrahydrofuran. Original poly(vinyl chloride) was also grafted with tert‐butyl methacrylate under the same conditions to compare with that of partially dehydrochlorinated poly(vinyl chloride). The graft copolymers were characterized by elemental analysis, FTIR, ¹H and ¹³C‐NMR, differential scanning calorimetry, and gel permeation chromatography (GPC). Thermal stabilities of the graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators.     

Dielectric Properties of Polymer Composites Filled with Different Metals

Electrically conductive composite systems based on polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) filled with metal powders of Al and Cu have been studied. The composite preparation conditions allow the formation of a random distribution of metallic particles in the polymer matrix. Dependence of the dielectric and conductivity properties of the PVC and PMMA/fillers was studied over a broad range of frequency and volume fraction of metal fillers. The experimental results could be explained by means of the conductivity of fillers and the interface polarization between polymers and fillers. Percolation was also seen in this study when the volume fraction of conducting fillers was close to critical value, in which the composites undergo an insulator‐conductor transition. The relation among the dielectric property and the fillers with different conductivity was proposed.     

Preparation,Characterization and Electromagnetic Shielding Effectiveness of Conductive Polythiophene/Poly(ethylene terephthalate) Composite Fibers

Conductive polythiophene (PTh)/poly(ethylene terephthalate) (PET) composite fibers were prepared by polymerization of thiophene in the presence of PET fibers in acetonitrile medium using FeCl₃. The effects of polymerization conditions such as oxidant/monomer mol ratio and polymerization temperature and time on PTh content and surface electrical resistivity of PTh/PET composite fiber were investigated in detail. It was observed that the usage of preswelled PET fibers in dichloromethane increased the PTh content and decreased surface resistivity of composite fiber. Composite fiber having the highest PTh content (5.7%) and the lowest surface resistivity (80 kΩ) was obtained at 20°C with 1.25 M FeCl₃ and 0.42 M thiophene concentrations. The washing effects of laundering detergent and dry cleaning liquid on surface resistivity of composite fibers were investigated. The electromagnetic shielding effectiveness (EMSE) and relative shielding efficiency by absorption and reflection of composite fibers were measured in the radio and microwave frequency range. The results show that the EMSE values decreased with increasing frequency from radio waves to microwaves with an attenuation of 21 dB to 4 dB.     

A Ready‐to‐Use Electrochemical Kit Design for the Diagnosis of Single Nucleotide Polymorphisms

In this study, for the first time a model electrochemical kit was constructed for the detection of a functional polymorphism in catechol‐O‐methyl transferase (COMT) gene which is important for diagnosis of neuropsychiatric disorders as Alzheimer disease. The disposable pencil graphite electrode (PGE) is designed as a “kit” and the probe DNA covered PGE can detect single nucleotide polymorphisms (SNPs) from real samples based on the guanine oxidation signal even after 5 months of kit preparation (150 days durability).The detection limit (S/N=3) of the biosensor was calculated as 1.18 pmol of synthetic target sequence and 6.09×10⁵ molecules of real samples in 30 min detection time.