From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

CSE-MECC two-dimensional capillary electrophoresis analysis of proteins in the mouse tumor cell (AtT-20) homogenate

Two-dimensional capillary electrophoresis was used for the separation of proteins and biogenic amines from the mouse AtT-20 cell line. The first-dimension capillary contained a TRIS–CHES–SDS–dextran buffer to perform capillary sieving electrophoresis, which is based on molecular weight of proteins. The second-dimension capillary contained a TRIS–CHES–SDS buffer for micellar electrokinetic capillary chromatography. After a 61-s preliminary separation, fractions from the first-dimension capillary were successively transferred to the second-dimension capillary, where they further separated by MECC. The two-dimensional separation required 60 min.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Hydration of short-chain poly(oxyethylene) in carbon tetrachloride: an infrared spectroscopic study

Hydration of short-chain poly(oxyethylene)s, CH(3)(OCH(2)CH(2))(m)OCH(3) (abbreviated as C(1)E(m)()C(1)) (m = 1-3), in carbon tetrachloride has been studied by infrared spectroscopy. The O-H stretching vibrations of water in ternary solutions with H(2)O:C(1)E(m)C(1):CCl(4) mole ratios of 0.000418:0.005:0.995 to 0.000403:0.04:0.96 were analyzed. Two types of hydrogen bonds are formed in the interaction between water and C(1)E(m)C(1) in carbon tetrachloride; one is a monodentate hydrogen bond, in which only one of the O-H bonds of a water molecule participates in hydrogen bonding, and the other is a bidentate hydrogen bond, in which both of the O-H bonds of a water molecule participate in hydrogen bonding by bridging oxygen atoms separated by two or more monomer units on the polymer chain. An important finding is that the bidentate hydrogen-bond bridge is not formed between the nearest-neighbor oxygen atoms. This experimental observation supports the results of previous molecular dynamics simulations. The shortest oligomer of poly(oxyethylene), i.e., CH(3)OCH(2)CH(2)OCH(3) (1,2-dimethoxyethane) with a single monomer unit, is suggested not to be an adequate model for this polymer with respect to hydrogen bonding to water. The hydrogen bonding in a 1:1 C(1)E(m)C(1)-water adduct in carbon tetrachloride represents primitive incipient hydration of poly(oxyethylene). The present results indicate that both monodentate and bidentate hydrogen bonds are important and the latter is destabilized more rapidly than the former with increasing temperature. This dehydration process can be a potential mechanism of the poly(oxyethylene)-water phase separation.     

Faceted structures in Langmuir monolayers of diethylene glycol mono-n-octadecyl ether at the air--water interface

We have concurrently studied the surface pressure (pi) versus area (A) isotherms and microscopic surface morphological features of Langmuir monolayers of diethylene glycol mono-n-octadecyl ether (C18E2) by film balance and Brewster angle microscopy (BAM) over a wide range of temperature. At temperatures < or =10 degrees C, the monolayers exist in the form of condensed phase even just after the evaporation of the spreading solvent, suggesting that the melting point of the condensed phase is above this temperature. At > or =15 degrees C, the monolayers can exist as gas (G), liquid expanded (LE), and liquid condensed (LC) phases and undergo a pressure-induced first-order phase transition between LE and LC phases showing a sharp cusp point followed by a plateau region in the pi-A isotherms. A variety of 2-D structures, depending on the subphase temperature, are observed by BAM just after the appearance of the cusp point. It is interesting to note here that the domains attain increasingly large and compact shape as the subphase temperature increases and finally give faceted structures with sharp edges and corners at > or =30 degrees C. The BAM observations were coupled with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) to gain better understanding regarding the conformational order and subcell packing of the molecules. The constancy of the methylene stretching modes over the studied temperature range suggests that the hydrocarbon chains do not undergo any conformational changes upon compression of the monolayer. However, the full width at half-maximum (fwhm) values of the asymmetric methylene stretching mode (nu(as)(CH(2))) are found to respond differently with changes in temperature. It is concluded that even though the trans/gauche ratio of the hydrocarbon chains remains virtually constant, the LE-LC phase transition upon compression of the monolayer is accompanied by a loss of the rotational freedom of the molecules.     

Biologically active metabolites from fungi, 19: new isocoumarins and highly substituted benzoic acids from the endophytic fungus, Scytalidium sp

Six known metabolites, two new isocoumarins 4 and 8, and one new highly substituted benzoic acid derivative 9 were isolated from the ethyl acetate culture extract of a fungal endophyte, Scytalidium sp. In addition, another new benzoic acid 10 with an unusual 1,2-dicarbonyl side chain was indirectly identified from its methylated derivatives 10a-10d.     

Studies on the thermal behaviour of detonating fuse and detonators

Investigations of the thermal stability of detonating fuse containing 10 g pentaerythrol tetranitrate (PETN) revealed that the cord burnt under unconfinement at 403 K. Under confinement in a steel pipe or copper tube there was a partial detonation at 403 K. In order to characterize the thermal stability of PETN and pyrotechnic composition used in fuse head of electric detonators differential thermal analysis (DTA) was used.The electric detonators of aluminium cell and copper cell were heated from ambient temperature to 373 K at an average rate of 0.4 deg/min. The rate of heating was increased gradually to 1.5 deg/min till explosion. The detonation temperature varied between 373 K and 375 K.The impact and friction sensitivity of detonating fuse was poor. There was no detonation when a 5 kg hammer was repeatedly hit over the fuse from a height of one metre. There was no detonation when the detonating fuse was rubbed by a blunt edge of steel plate till it was smashed.

---

Zusammenfassung Untersuchungen der thermischen Stabilität von Sprengschnuren mit 10 gm^–1 PETN zeigten, daß die Schnur frei bei 403 K verbrennt. Unter Abschluß in einem Stahloder Kupferrohr tritt bei 403 K eine partielle Detonation auf. Zur Charakterisierung der thermischen Stabilität von PETN und von pyrotechnischen Mischungen, die in Zünderköpfen von elektrischen Sprengkapseln verwendet werden, wurde Differentialthermoanalyse (DTA) angewendet. Die elektrischen Sprengkapseln von Aluminium- und Kupferzellen wurden mit einer durchschnittlichen Aufheizgeschwindigkeit von 0.4 Grad/min von Raumtemperatur auf 373 K erhitzt. Die Aufheizgeschwindigkeit wurde bis zur Explosion allmählich auf 1,5 Grad/min erhöht. Die einzelnen Detonationen erfolgten bei einer Temperatur zwischen 373 und 375 K. Die Stoß- und Reibempfindlichkeit der Sprengschnur war gering. Bei einem mehrmaligen Einwirken eines 5 kg-Hammers aus einer Höhe von 1 m erfolgte keine Detonation. Bei Reiben mit der unscharfen Kante einer Stahlplatte bis zur Zerstörung erfolgte keine Detonation.

---

, 10 ^–1 PETN, , 403 , 403 . PETN , , . 373 0,4°/. 1,5°/ . 373 375 . . 5 1 . , .

---

---

The authors are indebted to the Director, Central Mining Research Station for giving permission to publish this paper. The views expressed in the paper are those of the authors and not necessarily of the institute which they belong to.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

N-Bromosuccinimide-dibenzoyl peroxide/azabisisobutyronitrile: a reagent for Z- to E-alkene isomerization

N-Bromosuccinimide-dibenzoyl peroxide/azobisisobutyronitrile is used to carry out several types of Z- to E-alkene isomerizations. The NBS-bromination conditions are sufficient for both allylic bromination and alkene isomerization. When the allylic hydrogens are not available in substrates, only the isomerization of the alkene takes place. The present conditions for isomerization of carbon-carbon double bonds are mild and efficient.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.