Solvent-Free Microwave-Assisted Organic Reactions Preparation of β-Keto Esters

Microwave technique has been utilised in the preparation of β-keto esters. Two different procedures are described: transesterification of β-keto esters and ring opening of 2,2,6-trimethyl-1,3-dioxin-4-one.     

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log K_OW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.     

Thermally Induced Synthesis of Anthracene-, Pyrene- and Naphthalene-Fused Porphyrins

The synthesis of π-extended porphyrins containing anthracenyl moieties still represents an important challenge. Here, we report on the synthesis of a series of unsubstituted naphthyl-, pyrenyl- and anthracenyl-fused zinc porphyrin derivatives. To this aim, meso-substitued porphyrins are synthesized and the fusion of the PAHs (Polycyclic Aromatic Hydrocarbon) on the β-positions are performed through thermally induced dehydro-aromatization. The fused zinc-porphyrin derivatives are fully characterized and their optical absorption and photoluminescence properties are reported. We also demonstrate that zinc can be removed from the porphyrin core, giving rise to pure C, H, N materials. This work constitutes the first step towards the synthesis of the fully-fused tetra-anthracenylporphyrin.     

Light‐Controlled Regioselective Synthesis of Fullerene Bis‐Adducts

Multi‐functionalization and isomer‐purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches—tether‐directed covalent functionalization and supramolecular masks—the control of regioselectivity requires multi‐step synthetic procedures to prepare the desired tether or mask. Herein, we describe light‐responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis‐adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis‐addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis‐functionalization of C₆₀ can be controlled by light.     

Elemental sensitivity in soft x-ray imaging with a laser-plasma source and a color center detector

Elemental sensitivity in soft x-ray imaging of thin foils with known thickness is observed using an ultrafast laser-plasma source and a LiF crystal as detector. Measurements are well reproduced by a simple theoretical model. This technique can be exploited for high spatial resolution, wide field of view imaging in the soft x-ray region, and it is suitable for the characterization of thin objects with thicknesses ranging from hundreds down to tens of nanometers.     

HPLC‐MS/MS method for quantitative determination of the novel dual inhibitor of FGF and VEGF receptors E‐3810 in tumor tissues from xenograft mice and human biopsies

We developed and validated a high‐performance liquid chromatography–tandem mass spectrometry analytical method to measure E‐3810, a novel dual inhibitor of fibroblast growth factor receptor 1 and vascular endothelial growth factor receptor 1–3 in tissues and determined the drug concentration in a biopsy of human breast cancer for the first time. The method is a modification of our previous one in plasma to study the clinical pharmacokinetics of the drug during the phase I/II trial. In view of the changes in matrix, we applied a partial validation protocol to determine recovery, sensitivity, range of linearity, precision, accuracy and stability of the method over three runs in a mouse tumor tissue and liver. The recovery of E‐3810 from liver or tumor homogenate was >69%, and the lower limit of quantification was 5 ng/ml. The method was linear in the concentration range 5.0–500.0 ng/ml, as demonstrated by a determination coefficient R² ≥ 0.9955. The range of the calibration curve was appropriate for the analysis, as demonstrated by the accuracy, which was between 91.4% and 106.7%. Interday precision and accuracy on quality control samples at 9, 30 and 300 ng/ml were 3.1‐11.2% and 98.3–111.4%, respectively. The assay was applied successfully to determine the intratumor concentration of E‐3810 in different mouse xenograft tumor models and in a biopsy of a patient with breast cancer included in the phase I/II trial of the drug. In mouse tumors, the concentrations of E‐3810 were higher than necessary to exert antitumor activity in vitro (1 µM). Even more of interest was the result obtained in a human biopsy of few milligrams, where E‐3810 reached 4.9 µg/g (11 µM). Copyright © 2014 John Wiley & Sons, Ltd.     

Resistance of composite materials based on BaCeO3 against the corrosive effects of carbon dioxide and water vapour at intermediate fuel cell operating temperatures

The objective of this work is to analyse the chemical stability of BaCe_0.85Y_0.15O_3?δ –Ce_0.85Y_0.15O_2?δ (BCY15–YDC15) composite materials at 600 °C and to compare the aforementioned chemical stability with that of pure BCY15. The composite powders were obtained by mixing together powders of BCY15 and YDC15 in the following volume fractions: 90 % BCY15 + 10 % YDC15, 70 % BCY15 + 30 % YDC15, 30 % BCY15 + 70 % YDC15, 20 % BCY15 + 80 % YDC15 and 10 % BCY15 + 90 % YDC15. After that both powders and sintered samples of the BCY15 and the BCY15–YDC15 composites were saturated in two different atmospheres at 600 °C: CO₂/H₂O (3.1 mol% H₂O) and N₂/H₂O (46.8 mol% H₂O). The effects of the previously mentioned atmospheres on the physicochemical properties of the samples were investigated via differential thermal analysis (DTA) combined with thermogravimetric analysis (TG). Furthermore, mass spectrometry was used to analyse the chemical composition of the gases released from the samples during the DTA–TG heating process. The surface and cross-section morphology of the samples were examined by scanning electron microscopy. Moreover, the phase composition of each sample was studied via X-ray Diffraction. From the combined analysis, it can be concluded that the addition of YDC15 in the composite samples leads to an increase in resistance against the corrosive effects of CO₂. Furthermore, it was determined that all samples maintain stability in the presence of H₂O at 600 °C.     

Palladium‐Catalysed Direct Cross‐Coupling of Organolithium Reagents with Aryl and Vinyl Triflates

A palladium‐catalysed cross‐coupling of organolithium reagents with aryl and vinyl triflates is presented. The reaction proceeds at 50 or 70 °C with short reaction times, and the corresponding products are obtained with moderate to high yields, with a variety of alkyl and (hetero)aryl lithium reagents.     

A Highly Luminescent Tetramer from a Weakly Emitting Monomer: Acid‐ and Redox‐Controlled Multiple Complexation by Cucurbit[7]uril

The tetrahedral, shape‐persistent molecule 1 ⁴⁺, containing four pyridylpyridinium units connected through a central carbon atom, exhibits unexpected photophysical properties including a substantially redshifted absorption (2350 cm^?1) and a very strong fluorescence (Φ_em=40 %), compared with the monomer 2 ⁺ (Φ_em=0.4 %). Density functional theory calculations on the structure and spectroscopic properties of 1 ⁴⁺ and 2 ⁺ show that exciton interactions, homoconjugation, and orbital nature account for the observed differences in their photophysical properties. The protonated tetramer binds four cucurbit[7]uril molecules and the host/guest interactions can be controlled by chemical (acid/base) as well as redox stimuli.