Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst

In this report, a simple process for preparing HFC-245fa through the reaction of 1,1,1,3,3-pentachloropropane (PCP) and anhydrous HF via two-step vapor-phase catalytic fluorination is described. The antimony pentafluoride catalyst was supported on inert porous materials to improve the catalytic activity. The resulting process catalyst not only exhibited high catalytic activity and excellent thermo-stability, but also improved the performance of SbF₅, in terms of hygroscopicity and corrosion.     

Catalytic flow-injection determination of copper at nanogram levels by using color formation of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of pyridine and ammonia as activators

A spectrophotometric flow-injection method for determining copper(II) has been developed. It is based on the catalytic effect of copper(II) on the oxidative coupling of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of hydrogen peroxide. Pyridine and ammonia as activators increased the absorbance for the copper(II)-catalyzed coloration, and the dye formed was stabilized by adding a non-ionic surfactant. The working range of the method was 0.1-2.0 ng ml(-1) of cooper(II) with a relative standard deviation 2.4% at a sampling rate of 30 h(-1). Interference from iron(III) was effectively suppressed by citric acid. Copper in natural water samples can be determined easily.     

Synthesis and structure of 16 pi octaalkyltetraphenylporphyrins

The oxidized octaethyltetraphenylporphyrin (1, OETPP) and the corresponding newly prepared octaisobutyltetraphenylporphyrin (3, OisoBuTPP) could be isolated from the reaction of OETPPLi2 (or OisoBuTPPLi2) with SOCl2. The X-ray analysis and the characteristic UV-vis spectra of 1 and 3 revealed that these are the first examples of 16 pi nonaromatic porphyrins.     

Organo-silanes and -germanes with chelated and/or non-chelated oxinato ligands

Several tri- and di-organo(oxinato)-silanes and -germanes have been prepared from corresponding organo-silazanes or -germazanes. The UV spectra indicate that the compounds involve either chelated or non-chelated oxinato groups or both depending on the number and kind of organic groups on the metal atom. The PMR spectra of RR′Si(OX)₂ (R = alkyl, R′ = vinyl or phenyl) are interpreted in terms of rapid exchanges between the two kinds of oxinato groups     

Reaction of magnesium alkylidene carbenoids with lithium acetylides and lithium thiolates: a novel synthesis of conjugated enynes and vinyl sulfides

Magnesium alkylidene carbenoids were generated from 1-chlorovinyl p-tolyl sulfoxides with i-PrMgCl at −78 °C in THF or toluene via the sulfoxide-magnesium exchange reaction. Reaction of the generated magnesium alkylidene carbenoids with lithium acetylides or lithium thiolates gave conjugated enynes or vinyl sulfides, respectively, in moderate to good yields. The intermediate of this reaction was found to be the alkenyl anion and it could be trapped with some electrophiles to give tetra-substituted conjugated enynes and vinyl sulfides.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

Novel alkenylative cyclization using a ruthenium catalyst

Novel alkenylative cyclization of enyne was developed using Cp*RuCl(cod) under ethylene gas at room temperature.     

Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.