Die Kristallstruktur von wasserfreiem Melaminiumchlorid

Crystal Structure of non‐aqueous Melaminium Chloride Melaminium chloride was obtained as colorless, needle‐shaped, single crystalline material from solid state reactions between melamin and ammonium chloride. The structure of [C₃N₆H₇]Cl was refined by single crystal X‐ray diffraction: I2/m, Z = 8, a = 852.87(4), b = 1704.4(1) c = 918.44(4) pm and β = 92.165(6)°. The crystal structure contains melaminium ions stacked to columns along [100] and linked via N‐H···N bridges to form bands along [001]. Both of the two distinct chloride ions are stabilized by six hydrogen bonds through distorted trigonal prismatic arrangements of hydrogen atoms to yield a supramolecular structure.     

Synthesis of cyclopentane amide DNA (cpa-DNA) and its pairing properties

We recently reported on the synthesis and pairing properties of the DNA analogue bicyclo[3.2.1]amide DNA (bca-DNA). In this analogue the nucleobases are attached via a linear, 4-bond amide-linker to a structurally preorganized sugar-phosphate backbone unit. To define the importance of the degree of structural rigidity of the bca-backbone unit on the pairing properties, we designed the structurally simpler cyclopentane amide DNA (cpa-DNA), in which the bicyclo[3.2.1]-scaffold was reduced to a cyclopentane unit while the base-linker was left unchanged. Here we present a synthetic route to the enantiomerically pure cpa-DNA monomers and the corresponding phosphoramidites containing the bases A and T, starting from a known, achiral precursor in 9 and 12 steps, respectively. Fully modified oligodeoxynucleotides were synthesized by standard solid-phase oligonucleotide chemistry, and their base-pairing properties with complementary oligonucleotides of the DNA-, RNA-, bca-DNA-, and cpa-DNA-backbones were assessed by UV melting curves and CD-spectroscopic methods. We found that cpa-oligoadenylates form duplexes with complementary DNA that are less stable by -2.7 degrees C/mod. compared to DNA. The corresponding cpa-oligothymidylates do not participate in complementary base-pairing with any of the investigated backbone systems except with its own (homo-duplex). As its congener bca-DNA, cpa-DNA seems to prefer left-handed helical duplex structures with DNA or with itself as indicated by the CD spectra.     

Morphology-controlled nonaqueous synthesis of anisotropic lanthanum hydroxide nanoparticles

The preparation of lanthanum hydroxide and manganese oxide nanoparticles is presented, based on a nonaqueous sol-gel process involving the reaction of La(OiPr)₃ and KMnO₄ with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. The lanthanum manganese oxide system is highly complex and surprising results with respect to product composition and morphology were obtained. In dependence of the reaction parameters, the La(OH)₃ nanoparticles undergo a shape transformation from short nanorods with an average aspect ratio of 2.1 to micron-sized nanofibers (average aspect ratio is more than 59.5). Although not directly involved, KMnO₄ plays a crucial role in determining the particle morphology of La(OH)₃. The reason lies in the fact that KMnO₄ is able to oxidize the benzyl alcohol to benzoic acid, which presumably induces the anisotropic particle growth in [0 0 1] direction upon preferential coordination to the ±(1 0 0), ±(0 1 0) and ±(−110) crystal facets. By adjusting the molar La(OiPr)₃-to-KMnO₄ ratio as well as by using the appropriate solvent mixture it is possible to tailor the morphology, phase purity and microstructure of the La(OH)₃ nanoparticles. Postsynthetic thermal treatment of the sample containing La(OH)₃ nanofibers and β-MnOOH nanoparticles at the temperature of 800 °C for 8 h yielded polyhedral LaMnO₃ and worm-like La₂O₃ nanoparticles as final products.     

Stability of a fluid-fluid interface in a biconical pore segment

Pore networks that include biconical pore segments are frequently used to model two-phase flow. In this work, we describe in detail the displacement of a fluid-fluid interface in such a pore segment. We assume sharp edges in the throat, inlet, and outlet of the pore segment to be the limiting cases of round edges, the radii of which vanish. We account for interfacial and lineal tensions that cause nonconstant contact angles. For zero lineal tension, we provide analytical solutions for flow induced by changing infinitesimally slowly either capillary pressure or the volume of one fluid. In diverging and converging cones, the common line among the two fluids and the solid phase slides while it is pinned in the throat, inlet, and outlet. We observe hysteresis within the pore segment, and drainage entry pressures deviate from prior work.     

Comparative analysis of local spin definitions

This work provides a survey of the definition of electron spin as a local property and its dependence on several parameters in actual calculations. We analyze one-determinant wave functions constructed from Hartree-Fock and, in particular, from Kohn-Sham orbitals within the collinear approach to electron spin. The scalar total spin operators S2 and Sz are partitioned by projection operators, as introduced by Clark and Davidson, in order to obtain local spin operators SASB and SzA, respectively. To complement the work of Davidson and co-workers, we analyze some features of local spins which have not yet been discussed in sufficient depth. The dependence of local spin on the choice of basis set, density functional, and projector is studied. We also discuss the results of Sz partitioning and show that SzA values depend less on these parameters than SASB values. Furthermore, we demonstrate that for small organic test molecules, a partitioning of Sz with preorthogonalized Lowdin projectors yields nearly the same results as one obtains using atoms-in-molecules projectors. In addition, the physical significance of nonzero SASB values for closed-shell molecules is investigated. It is shown that due to this problem, SASB values are useful for calculations of relative spin values, but not for absolute local spins, where SzA values appear to be better suited.     

Uranyl ion-selective optode based on neutral ionophores

A pulsed molecular beam Fourier transform microwave spectrometer especially designed for the quantitative analysis of polar pollutants in air is presented. This very fast method has a sensitivity in the ppm range and can be applied to a wide variety of substances. Details of the apparatus and the results of some performance tests are given.     

Asymmetric Synthesis of 3-Hydroxyprolines by Photocyclization of N-(2-Benzoylethyl)glycinamides

The chiral N-(2-benzoylethyl)-N-tosylglycinamides 1a-c were prepared from the C₂-symmetric pyrrolidines 5a-c . Irradiation of these ketones 1a-c gave cis-3-hydroxyprolinamides 10-12 in moderate to good yields (Scheme 3). The de of the photocyclizations depended on the size of the substituents in positions C(2) and C(5) of the chiral pyrrolidine auxiliaries. In addition, the de varied with the reaction temperature, allowing the determination of activation-parameter differences. The structure of products 10-12 were established by NMR and X-ray analyses.     

Säurekatalysierte Umlagerung von 9-Hydroxyfuranoeremophilanen zu Eremophilanlactonen

Acid-Catalyzed Rearrangement of 9-Hydroxyfuranoeremophilanes to Eremophilanlactones 9-Hydroxyfuranoeremophilanes 1–3 are the main components of freshly harvested rhizomes of P. hybridus (furanopetasin chemovar, Table, Fig. 1). They easily and quantitatively rearrange in the presence of traces of acid to give an epimeric mixture of 8-H-eremophilanlactones 4–6 (eremophilenolides, Table, Figs. 4 and 5). Besides subsequent oxidation (see 4 → 7 ), this is the most important reaction occuring during drying and storage of rhizomes of P. hybridus (Figs. 1 and 3). A reasonable mechanism of the rearrangement is presented, and spectroscopic structure elucidation of 8-H-eremophilanlactones is discussed.     

Dimetallic complexes of a structurally versatile pyridazine-containing Schiff-base macrocyclic ligand with pendant pyridine arms

The new [2 + 2] Schiff-base macrocyclic ligand L2, containing pyridazine head units and pyridine pendant arms, was synthesised as [Ba(II)2L2(ClO4)4(OH2)] 1 from the barium(II) ion templated condensation reaction of 3,6-diformylpyridazine and N1-(2-aminoethyl)-N1-(methylene-2-pyridyl)-ethane-1,2-diamine. Subsequent transmetallation reactions of 1 with copper(II), iron(II) and manganese(II) perchlorates led to the formation of [Cu(II)2L2](ClO4)4.2MeCN 2, [Fe(II)2L2(MeCN)2](ClO4)4 3 and two manganese complexes, 4 and 5, with the same formula, [Mn(II)2L2(MeCN)(OH2)](ClO4)4, but slightly different crystal structures, respectively. Single-crystal X-ray structural analyses reveal the variety of structures which can be supported by L2 in order to meet the coordination environment preferences of the incorporated metal ions. The barium(II) ions in 1 have an irregular ten-coordinate geometry whereas the copper(II) ions in 2 have a square pyramidal geometry and the iron(II) ions in 3 have an octahedral geometry, while in 4 and 5 every manganese(II) ion is seven-coordinate and the environment can be best described as distorted pentagonal bipyramidal. In 1, 4 and 5 the pyridazine moieties bridge the metal centres [Ba(1)...Ba(2) 4.9557(3)A 1; Mn(1)...Mn(2) 4.520(1)A 4; Mn(1)[dot dot dot]Mn(2) 4.3707(8)A 5] but this is not observed in the copper(II) and iron(II) complexes, 2 and 3, in which the metal ions are well separated [Cu(1)...Cu(2) 5.9378(6)A 2; Fe(1)...Fe(2) 5.7407(12)A 3]. In the cyclic voltammogram of [Cu2(II)L2](ClO4)4.2MeCN 2 in MeCN vs. Ag/AgCl two separate reversible one-electron transfer steps are observed [E(1/2)=0.04 V, DeltaE= 0.12 V and E(1/2)= 0.20 V, DeltaE=0.12 V; K(c)=510; in this system E(1/2)(Fc+/Fc)=0.42 V and DeltaE(Fc+/Fc)=0.08 V]. The other complexes cannot be reversibly reduced/oxidised.     

Selective metal promoted hydrolysis of nitrile groups in the side chain of tetraazamacrocyclic Cu2+-complexes

The metal promoted hydrolysis of nitrile groups in the side chains of tetraazamacrocyclic Cu2+ complexes has been studied by stopped-flow techniques. It is shown that the reaction proceeds by an intramolecular attack of an axially coordinated OH- onto the nitrile group to give the corresponding amide. In alkaline solution the amide then deprotonates and binds to the axial position of the Cu2+ thus preventing further coordination of an OH-. This explains mechanistically that in the Cu2+ complexes of macrocycles carrying two nitrile functions only one is selectively hydrolysed. The nitrile hydrolysis has also been used on a preparative scale to synthesize tetraazamacrocycles with two different side chains. X-Ray diffractions of several products are presented to confirm the structures and the results from the kinetics and equilibria measurements.