Stereoselective synthesis of (R)-(+)-1-methoxyspirobrassinin, (2R,3R)-(−)-1-methoxyspirobrassinol methyl ether and their enantiomers or diastereoisomers

Stereoselective synthesis of cruciferous indole phytoalexin (R)-(+)-1-methoxyspirobrassinin and its unnatural (S)-(−)-enantiomer was achieved by spirocyclization of 1-methoxybrassinin in the presence of (+)- and (−)-menthol and subsequent oxidation of the obtained menthyl ethers. Methanolysis of menthyl ethers in the presence of TFA afforded (2R,3R)-(−)-1-methoxyspirobrassinol methyl ether as well its unnatural (2S,3S)-, (2R,3S)-, and (2S,3R)-isomers.     

Estimation of third virial coefficients at low reduced temperatures

We use the Clausius–Clapeyron equation to calculate third virial coefficients at low reduced temperatures. This procedure gives an alternative to predict third virial coefficients in a region where the third virial coefficient is difficult to measure. We compare the results of this method with published third virial coefficient data. Calculated third virial coefficients have average percentage deviations within 5% of the experimental values at reduced temperatures between 0.8 and 1.0.     

Growth and characterization of Mn- and Co-doped ZnO nanowires

A flow injection chemiluminescence method is proposed for the determination of cobalt, based on the strong catalytic effect of Cobalt(II) (1,10-phenanthroline)₃ complex on the lucigenin-periodate reaction in alkaline medium. Under the optimum experimental conditions, the chemiluminescence signal responded linearly to the concentration of cobalt(II) in the 1.0 × 10⁻⁹–3.0 × 10⁻⁷ g mL⁻¹ range with a detection limit of 4.4 × 10⁻¹⁰ g mL⁻¹ cobalt(II). The relative standard deviation for the determination of 5.0 × 10⁻⁸ g mL⁻¹ of cobalt was 2.3% in eleven replicated measurements. The method was successfully applied to the determination of cobalt(II) in pharmaceutical preparations.     

Characterization of the triplet state of tris(8-hydroxyquinoline)aluminium(III) in benzene solution

The lowest triplet state of tris(8-hydroxyquinoline)aluminium(III) (Alq3) has been prepared by pulse radiolysis/energy transfer from appropriate donors in benzene solutions and has an absorption maximum around 510 nm with a lifetime of about 50 mus. It is quenched by molecular oxygen, leading to singlet oxygen formation. From flash photolysis and singlet oxygen formation measurements, a quantum yield of triplet formation of 0.24 was determined for direct photolysis of the complex. A value of 2.10 +/- 0.10 eV was determined for the energy of the lowest triplet state by energy transfer studies and was confirmed by phosphorescence measurements on Alq3, either in the heavy atom solvent ethyl iodide or photosensitized by benzophenone in benzene. Dexter (exchange) energy transfer was observed from triplet Alq3 to platinum(II) octaethylporphyrin.     

Isolation of selenium organic species from antarctic krill after enzymatic hydrolysis

Total selenium content and its distribution in the soluble and insoluble protein-bound fractions obtained after aqueous extraction of antarctic krill samples were determined. About 26% of the total selenium (2.4 g g^–1 dry weight) was found in the supernatant; the rest was in the pellet. Isolation of low molecular selenium-containing fractions was also performed by enzymatic digestion of the protein, followed by size-exclusion chromatography in conjunction with atomic absorption spectrometry. From the applied various proteinases (pronase E, subtilisin Carlsberg, trypsin, chymotrypsin, proteinase and proteinase N from Bacillus subtilis and Novo 0.6 MPX enzyme), the treatment with pronase E led to best recovery of selenium. About 96% of the total Se was found in the hydrolysate, mainly in low molecular weight fractions. Eighty percent of the Se species were in fractions with molecular weights in the range of amino acids and short peptides. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC-ICP-MS) allowed the identification of selenomethionine and the assumption that selenocystine or its derivatives were the main species in these fractions.     

Photophysical Properties of Some Flavones Probes in Homogeneous Media

Photophysical properties of five hydroxyflavones (HF) (some typical models of flavonols), (3 - HF, 6 - HF, 7-HF, 3, 6 - diHF and 3, 7 - diHF) were studied in homogeneous media by means of UV–vis and steady-state and time resolved fluorescence spectroscopies. Their absorption and fluorescence characteristics based on the flavonols structure are presented and discussed. It was found that the fluorescence of the flavonols depends on the nature of the solvent and on their molecular structure, especially on the position and the number of the -OH groups of the substituted phenyl ring. Attention is paid to the number of the -OH groups that influence the excited-state intramolecular proton transfer (ESIPT) process. The fluorescence quantum yield and the lifetime of the flavonols in heterogeneous media have been also determined. The results are discussed with relevance to the flavonols as sensitive fluorescence probe and to their microenvironments in the systems of biological interest and especially in a typical protein environment.     

Application of Ni(II)-imprinted cross-linked poly(methacrylic acid) synthesised through double-imprinting method for the on-line preconcentration of Ni(II) ions in aqueous media

The present paper describes the feasibility of on-line preconcentration of nickel ions from aqueous medium on Ni(II)-imprinted cross-linked poly(methacrylic acid) (IIP) synthesised through a double-imprinting method and their subsequent determination by FAAS. The proposed method consisted in loading the sample (20.0 mL, pH 7.25) through a mini-column packed with 50 mg of the IIP for 2 min. The elution step was performed with 1.0 mol L^?1 HNO₃ at a flow rate of 7.0 mL min^?1. The following parameters were obtained: quantification limit (QL) – 3.74 µg L^?1, preconcentration factor (PF) – 36, consumption index (CI) – 0.55 mL, concentration efficiency (CE) – 18 min^?1, and sample throughput – 25 h^?1. The precision of the procedure assessed in terms of repeatability for ten determinations was 5.6% and 2.5% for respective concentrations of 5.0 and 110.0 µg L^?1. Moreover, the analytical curve was obtained in the range of 5.0–180.0 µg L^?1 (r = 0.9973), and a 1.64-fold increase in the method sensitivity was observed when compared with the analytical curve constructed for the NIP (non-imprinted polymer), thus suggesting a synergistic effect of the Ni(II) ions and CTAB on the adsorption properties of the IIP. The practical application of the adsorbent was evaluated from an analysis of tap, mineral, lake and river water. Considering the results of addition and recovery experiments (90.2–100 %), the efficiency of this adsorbent can be ensured for the interference-free preconcentration of the Ni(II) ions.     

Synthesis and Complexation Studies of Various Precursors Based on Calix[4]arene-crown-5 and -6 for the Immunoanalysis of Potassium and Caesium Ions

In an attempt to generate antibodies for the development of an immunoanalysis method for potassium and caesium ions, new 1,3-alternate calix[4]arenes-crown-5 and -6 bearing either carboxylic or hydroxyl functions were synthesized in good yields. Their complexation properties towards potassium and caesium ions were investigated using ¹H NMR spectroscopy and the usual properties proved to be preserved in the presence of the anchoring arms.     

Kinetic Study of the CCl2 Radical Recombination Reaction by Laser‐Induced Fluorescence Technique

An experimental setup that coupled IR multiple‐photon dissociation (IRMPD) and laser‐induced fluorescence (LIF) techniques was implemented to study the kinetics of the recombination reaction of dichlorocarbene radicals, CCl₂, in an Ar bath. The CCl₂ radicals were generated by IRMPD of CDCl₃. The time dependence of the CCl₂ radicals’ concentration in the presence of Ar was determined by LIF. The experimental conditions achieved allowed us to associate the decrease in the concentration of radicals to the self‐recombination reaction to form C₂Cl₄. The rate constant for this reaction was determined in both the falloff and the high‐pressure regimes at room temperature. The values obtained were k₀ = (2.23 ± 0.89) × 10^?29 cm⁶ molecules^?2 s^?1 and k_∞ = (6.73 ± 0.23) × 10^?13 cm³ molecules^?1 s^?1, respectively.