An investigation on the nature of the peptide at m/z 904, overexpressed in plasma of patients with colorectal cancer and familial adenomatous polyposis

In an investigation devoted to the search for plasma markers for colorectal cancer (CRC), carried out by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry, a series of overexpressed peptides were identified in the plasma of patients. Among them the peptide with molecular weight 903 Da was the most abundant one, with a mean +/- (SD) relative abundance of 37 +/- 17% and a frequency over 60%. Interestingly, also in plasma samples of ten subjects affected by familial adenomatous polyposis (FAP), the peptide with molecular weight 903 was overexpressed. In this investigation, MALDI/MS/MS experiments were carried out on the ion at m/z 904 detected in the MALDI mass spectra of CRC and FAP patients. The data analysis by SwissProt.2007.01.09 indicates that this peptide is due to the sequence RPPGFSPF, found in the kininogen-1 precursor, which is an alpha-2-thiol proteinase inhibitor. In the case of subjects affected by a particular FAP syndrome, the MALDI/MS/MS spectra were quite different from those obtained from CRC and FAP patients. In fact, two sequences have been evidenced: RPPGFSPF belonging to kininogen-1 precursor, and PRKSSSSR belonging to Forkhead box protein 01A.     

An esterase-activated magnetic resonance contrast agent

A Gd(III) complex bearing pendant acetoxymethyl esters is activated on exposure to porcine liver esterase; the 84% increase in relaxivity is a result of suppression of HCO(3)(-)/CO(3)(2-) binding by the resulting negative charge.     

Homo- and hetero-dinuclear anion complexes

The tripodal system 4, in which urea fragments are appended to the three terminal amine nitrogen atoms of a tris(2-aminoethyl)amine (tren) subunit, includes a Cu(II) ion and two anions X-, according to a cascade mechanism through three well defined stepwise equilibria in a DMSO solution. The first anion X- (halide, N3-, NCS-, NO2-, H2PO4-) seeks the Cu(II) centre coordinated by the tren moiety; the second anion X- interacts with the trisurea cavity, but this occurs only if the stronger H-bond acceptors, such as N3- and H2PO4-, are used. Binding of the second X- ion is favoured by the preorganising effect exerted by the metal and disfavoured by the steric and electrostatic repulsions between the anions. Under the appropriate conditions, heterodinuclear complexes of formula [Cu(II)(4)(Cl)(H2PO4)] can be obtained in solution, in which Cl- is bound to the metal centre and H2PO4- interacts with the trisurea compartment.     

Multivariate calibration on NIR data: development of a model for the rapid evaluation of ethanol content in bakery products

A new NIR method based on multivariate calibration for determination of ethanol in industrially packed wholemeal bread was developed and validated. GC-FID was used as reference method for the determination of actual ethanol concentration of different samples of wholemeal bread with proper content of added ethanol, ranging from 0 to 3.5% (w/w). Stepwise discriminant analysis was carried out on the NIR dataset, in order to reduce the number of original variables by selecting those that were able to discriminate between the samples of different ethanol concentrations. With the so selected variables a multivariate calibration model was then obtained by multiple linear regression. The prediction power of the linear model was optimized by a new “leave one out” method, so that the number of original variables resulted further reduced.     

An investigation on calcium (II) oxalate as solubility and universal standard

The investigation on calcium (II) oxalate is carried out in order to study its solubility in different ionic media. In the same conditions the protonation constants of oxalate and the stability of complex species have been determined. As the stoichiometric composition of the solid calcium (II) oxalate prepared for the investigation was accurately checked, the salt CaC2O4 x H2O is proposed as universal (chelometry, redox, acidimetry) standard. Results of titrations support this possibility.     

Defects in divided zinc-copper aluminate spinels: structural features and optical absorption properties

Zn1-xCuxAl2O4 (0 < or = x < 0.30) compounds have been synthesized by polyesterification using metallic salts and annealing at low temperatures as well as by conventional solid state. XRD-powder data refinements (Rietveld method) have demonstrated that both compound series crystallize in the spinel structure (Fd3m) and exhibit similar inversion rates. This low-temperature route lead to metastable phases with crystallite sizes around 40 nm whereas particle sizes are larger than 1 moicrom in the case of solid-state route. This preparative method largely described in the literature allows stabilizing reduced copper states thanks to the presence of reductive organic species, which are decomposed below T = 700 degrees C. The absorption spectra of the x = 0.15 composition exhibit strong differences depending on the synthesis route. These differences can be explained by the occurrence of Cu2+/Cu+ mixed valencies in compounds prepared by the low-temperature route; 33% of monovalent copper has been identified in the x = 0.15 composition prepared by low-temperature process, whereas the solid-state compound contains only divalent copper. Reductive properties of polyesterification reaction implying citric acid and low annealing temperature (T = 700 degrees C) are mainly responsible of the occurrence of the Cu2+/Cu+ mixed valencies. Actually, the annealing under air at T = 1000 degrees C of divided zinc-copper aluminates prepared at low temperatures (T = 700 degrees C) leads to the oxidation reaction Cu+ --> Cu2+ + e- confirmed by the evolution of magnetic measurements, ESR spectra, and optical absorption properties. Defects such as oxygen vacancies in the anionic network leading to reduction in the cations coordination number could also explain the strong evolution of optical absorption spectra especially around lambda = 700 nm where intervalencies transfer (Cu+/Cu2+) as well as intra-atomic d-d transitions (Cu2+ in a 5-fold coordination) can occur. Finally the occurrence of monovalent and divalent copper at the surface of such divided oxides, probably in tetrahedral sites, has been demonstrated by FTIR spectroscopy using the co-adsorption of CO and NO as probe molecules.     

Theoretical elastic moduli for disordered packings of interconnected spheres

A theoretical model has been developed which provides analytical expressions for the elastic moduli of disordered isotropic ensembles of spheres interconnected by physical bonds. Young's and shear moduli have been derived assuming an ideal random isotropic network and the radial distribution function for disordered packings of spheres. The interparticle interactions are accounted for in terms of surface forces for the two distinct cases of perfectly rigid spheres and spheres deformable at contact. A theoretical expression is also derived in a similar way for the bulk or compressibility modulus. In this case, an atomistic approach has been followed based on the analogy with noble gas solids and colloidal crystals. Also in this case, disordered spatial distribution of the spheres is described statistically. For the case of colloidal aggregates, a total two-body mean-field interaction potential is used which includes the Born repulsion energy. This latter contribution plays an essential role in determining the compression behavior of systems of particles aggregated in the primary minimum of the potential well and, therefore, must not be neglected. Both the expression of the Young's modulus and that of the compressibility modulus derived in this work are found to be consistent with two distinct sets of experimental data which recently appeared in the literature.     

1,2,3-triazolate-bridged tetradecametallic transition metal clusters [M14(L)6O6(OMe)18X6] (M=FeIII, CrIII and VIII/IV) and related compounds: ground-state spins ranging from S=0 to S=25 and spin-enhanced magnetocaloric effect

We report the synthesis, by solvothermal methods, of the tetradecametallic cluster complexes [M14(L)6O6(OMe)18Cl6] (M=FeIII, CrIII) and [V14(L)6O6(OMe)18Cl6-xOx] (L=anion of 1,2,3-triazole or derivative). Crystal structure data are reported for the {M14} complexes [Fe14(C2H2N3)6O6(OMe)18Cl6], [Cr14(bta)6O6(OMe)18Cl6] (btaH=benzotriazole), [V14O6(Me2bta)6(OMe)18Cl6-xOx] [Me2btaH=5,6-Me2-benzotriazole; eight metal sites are VIII, the remainder are disordered between {VIII-Cl}2+ and {VIV=O}2+] and for the distorted [FeIII14O9(OH)(OMe)8(bta)7(MeOH)5(H2O)Cl8] structure that results from non-solvothermal synthetic methods, highlighting the importance of temperature regime in cluster synthesis. Magnetic studies reveal the {Fe14} complexes to have ground state electronic spins of S相似文献   

Simultaneous determination of multiple intracellular metabolites in glycolysis, pentose phosphate pathway and tricarboxylic acid cycle by liquid chromatography-mass spectrometry

A highly selective and sensitive method for identification and quantification of intracellular metabolites involved in central carbon metabolism (including glycolysis, pentose phosphate pathway and tricarboxylic acid cycle) by means of liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS) was developed. The volatile ion pair modifier tributylammonium acetate (TBAA) was employed in the mobile phase for simultaneously separation of 29 negatively charged compounds including sugar phosphates, nucleotides, and carboxylic acids on a common C18 reversed-phase column. Method validation results displayed that limits of detection (LODs) calculated according to DIN (German Institute for Standardization) 32645 are mostly below 60 nM, only with the exception of pyruvate and malate. The calibration curves showed excellent linearity mainly over three orders of magnitude with correlation coefficients R(2)>0.9982. This LC-MS/MS method was successfully applied to determine these metabolites in cell extracts of Escherichia coli. Most of the intracellular metabolites were found within the detection range and the relative standard deviations of the measurements were smaller than 5.65% (n=5) for a cell extract sample.