Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Evaluation of the cyclotron production of 165Er by different reactions

Erbium-165 with 10.3 h physical half-life decays completely by electron capture to the ground state of stable isotope ¹⁶⁵Ho and it is an ideal radio lanthanide for Auger electron therapy. Excitation function of ¹⁶⁵Er via ^natEr(p,x)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁶Er(p,2n)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁵Ho(p,n)¹⁶⁵Er and ¹⁶⁵Ho(d,2n)¹⁶⁵Er reactions were calculated using ALICE/ASH (Hybrid and GDH models) and EMPIRE 3.1 codes and then were compared with the reported measurement by experimental data and TENDL-2011. Physical yield and target thickness were evaluated with attention to excitation function, stopping power and SRIM code. ¹⁶⁵Er was produced using the sedimentation technique through the ^natEr (p,x)¹⁶⁵Tm → ¹⁶⁵Er reaction. The deposited target was irradiated with 15 MeV proton beams at 20 μA current for 1 h. The ¹⁶⁵Tm production yield was 26 MBq/μA h at the end of bombardment.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Structure and properties of NR/BR blend/clay nanocomposites prepared by the latex method

Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount.     

Polypyrrole–montmorillonite nanocomposite as sorbent for solid‐phase microextraction of phenolic compounds in water

A fiber‐coated polypyrrole–montmorillonite nanocomposite was prepared for solid‐phase microextraction. The fiber coating can be prepared easily; it is mechanically stable and exhibits relatively high thermal stability. The prepared fiber was evaluated for the extraction of some phenolic compounds from aqueous sample solutions by gas chromatography–mass spectrometry. The effects of the extraction and desorption parameters including extraction time, extraction temperature, stirring rate, ionic strength, pH and desorption temperature and time have been studied. At optimum conditions, the repeatability for one fiber (n = 5), expressed as % relative standard deviation was between 6.5 and 7.8% for the phenolic compounds. The detection limits for the studied phenolic compounds were between 0.05–1.3 ng/mL. The developed method offers the advantage of being simple to use, with shorter analysis time, lower cost, thermal stability of the fibers, and high relative recovery in comparison to conventional methods of analysis.     

Novel and versatile methodology for synthesis of β-aryl-β-mercapto ketone derivatives as potential urease inhibitors

The objective was to obtain new scaffold of compounds possessing anti-urease activity. For this new and simple method for the synthesis of β-aryl-β-mercapto ketone derivatives based on Michael addition of thiophenol to chalcones in an ionic liquid as a solvent was improved. The products were obtained in good to moderate yields with high purity and characterized by spectral and elemental analyses. The activities of synthesized compounds were investigated as new inhibitors of jack bean urease. Among 22 synthesized compounds, all of them have shown inhibitory effect in micromolar range, and the most potent one has IC₅₀ = 6 μM compared to hydroxyurea IC₅₀ = 100 μM as a reference inhibitor. A docking study was performed using Autodock 4.2 in parallel to in vitro experiments to illustrate the corresponded binding affinities as well as binding site, and involved residues in interaction. These computational results complimented the experimental inhibition activity and enabled us to report a potent urease inhibitors based on β-aryl-β-mercapto ketone scaffold.