2,3,5-三溴-4''''-硝基-4,2''''-双羟基二苯醚的合成及其抑菌活性研究

天然多溴代羟基二苯醚类化合物是存在于海洋海绵体中的一类抑菌活性物质,国内外学者对此类物质进行了大量的研究工作,发现他们具有良好的抑菌性,能有效抑制多种有害菌[1-4]的生长.     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

CC14法合成α—羟基—α—甲基苯丙酮的研究

α 羟基 α 甲基苯丙酮 (ＰＨＭＰ)是一种性能优良的新型光引发剂 ,具有引发效率高、热稳定性好、耐黄变、无异味等优点[1,2 ] 。现有合成方法步骤多 ,产率低 ,后处理麻烦 ,操作复杂[3,4] ,且在反应过程中会产生ＨＣ1或ＨＢｒ等有毒副产物。本文研究了在相转移催化剂的作用下[5,6 ] ,ＣＣｌ4直接氯化水解生成α 羟基 α 甲基苯丙酮的新方法。该方法不仅减少了反应步骤 ,简化了操作 ,而且提高了产品质量。1　实验部分1 .1　仪器与试剂傅立叶红外光谱仪Ｐｅｒｋｉｎ Ｅｌｍｅｒ 1 71 0 ,ＷＸＳ 1型阿贝折光仪。异丁酸 ,ＳＯＣｌ2 ,苯 ,四氯化…     

CuO/Al2O3催化剂高温固相反应的原位XRD和Raman研究

采用原位XRD和激光Raman光谱等技术对CuO/Al2O3系列催化剂高温下的表面组成和体相结构的变化进行研究.结果表明,随着焙烧温度升高,CuO首先与载体Al2O3发生固相反应生成CuAl2O4.CuAl2O4层能阻止外层CuO进一步向载体Al2O3扩散,从而使部分CuO稳定在CuO/Al2O3催化剂的表层.     

MOLECULAR WEIGHT DISTRIBUTION OF AB, A, TYPE CONDENSATION POLYMERS OBTAINED BY ADDING AB MONOMERS IN BATCHES

The molecular weight distribution (MWD) and arm length distribution of AB, Ar type condensation polymers obtained by adding AB monomers in batches have been derived by statistical and kinetic methods. Calculations show the MWD of condensation polymers obtained by this process is much narrower than that of one batch reaction and agrees with the Monte Carlo results very well.     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

固化反应产物网络结构的表征

本文论证了在交联点为三分枝的固化反应中,每一对未反应的基团使固化产物有效链损失数目为常数3。ΣA_(ai)—ΣB_(bj) 型固化反应的交联密度是官能团密度、有效数均官能度、配料比、固化体系凝胶分数、A(或B)基凝胶相反应程度、A_(ai)(或B_(bj))链节凝胶分数的函数。后两个不能直接测定的参数,可通过测定固化反应体系溶胶分数及溶胶相 A 基和 B 基的反应程度而获得。     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

有机相中α-氰基-3-苯氧基苄醇乙酯的酶促醇解反应

研究了有机相中脂肪酶催化α-氰基-3-苯氧基苄醇乙酯的醇解化反应。制备α -氰基-3-苯氧基苄醇。考察了酶、溶剂、醇、醇用量、溶剂水含量以及底物浓度等 因素对反应的影响，结果表明Novozym435脂肪酶催化活性最高，经实验确定的最佳 条件为：脱水甲苯为溶剂，正辛醇为酰基受体，正辛醇、酯的摩尔比为1.5:1，酶 量为8 mg/mL时的最佳底物浓度为108.13 mmol/L，在上述条件下反应30 h酯的转化 率 > 96%。     

一步室温固相化学反应合成纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O

以Keggin结构的钼磷酸(H3PMo12O40·13H2O)与苯丙氨酸(Phe)为原料,利用一步固相化学反应于室温合成了纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O,采用元素分析,IR,XRD,TEM,UV和循环伏安法等手段对其进行了结构表征及性质研究.结果表明,标题化合物纳米粒子为均匀的球状,粒径约为30～40nm.该化合物中杂多阴离子部分仍保持Keggin结构,但在钼磷酸与苯丙氨酸之间发生了显著的电荷转移.