On the onset of separation in turbulent boundary layer flow over two-dimensional humps of various size

Summary The available laboratory data of turbulent boundary layer flow over two-dimensional obstacles have been examined in order to identify the parameters (such as the aspect ratio or the surface roughness) driving the onset of separation. A comparison with some linearized models suitable for atmospheric applications is also made. It results that i) the model response can be highly sensitive to the detailed shape of the obstacle; ii) the ratio between obstacle length and boundary layer thickness is relevant in determining the pressure perturbation near the surface; iii) the surface shear stress is poorly described in most cases and in particular in the obstacle wake.

---

Riassunto I dati di laboratorio disponibili, relativi a strati limite turbolenti su ostacoli bidimensionali, sono stati esaminati al fine di identificare i parametri guida della separazione (quali la pendenza o la rugosità della superficie). Inoltre è stato fatto un confronto con i risultati di alcuni modelli linearizzati adatti per applicazioni atmosferiche. Ne risulta che i) la risposta del modello è molto sensibile alla forma dettagliata dell’ostacolo; ii) il rapporto fra la lunghezza dell’ostacolo e lo spessore dello strato limite turbolento incidente è importante nel determinare la perturbazione della pressione vicino alla superficie; iii) lo ?shear stress? superficiale non è riprodotto con accuratezza nella maggioranza dei casi, in particolare nella scia dell’ostacolo.

---

Резюме Анализируются имеющиеся лабораторные данные по турбулентному течению в пограничном слое над двумерными препятствиями, чтобы идентифицировать параметры (такие как аспектное отношение или шероховатость поверхности), определяющие возникновение отрыва. Проводится сравнение с некоторыми линеаризованными моделями, удобными для атмосферных приложений. Получены следующие результаты: 1) модельный отклик может быть очень чувствительным к детальной форме препятствия; 2) отношение между длиной препятствия и толщиной поверхностного слоя является существенным при определении возмущения давления вблизи поверхности; 3) напряжение поверхностного сдвига плохо описывается в большинстве случаев и, в частности, в спутной струе.

     

X射线衍射研究N2+注入Si

本文首先给出了180keV的N₂⁺注入Si的X射线衍射(XRD)分布,然后用Levenberg-Marquardt最优化方法模拟实验曲线。根据XRD运动学理论,在我们给出的试探胁变函数和多层模型的基础上,用自编程序计算给出了晶格胁变随注入深度、剂量和退火温度的变化。最后我们对实验和计算结果进行了初步的分析讨论。 关键词：     

Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

New FIR laser lines and frequency measurements for optically pumped CD3OH

Twenty new cw FIR laser lines in CD₃OH, optically pumped by a CO₂ laser, are reported. The frequencies of 39 of the stronger laser lines were measured relative to stabilized CO₂ lasers with a fractional uncertainty, as determined by the reproducibility of the FIR frequency itself, of 2 parts in 10⁷.Contribution of the U.S. Government, not subject to copyright.     

T 1 theorem for Besov spaces on nonhomogeneous spaces

Suppose μ is a Radon measure on ℝ ^d , which may be non doubling. The only condition assumed on μ is a growth condition, namely, there is a constant C₀>0 such that for all x∈supp(μ) and r>0, μ(B(x, r))⪯C₀rⁿ, where 0<n⪯d. We prove T1 theorem for non doubling measures with weak kernel conditions. Our approach yields new results for kernels satisfying weakened regularity conditions, while recovering previously known Tolsa’s results. We also prove T1 theorem for Besov spaces on nonhomogeneous spaces with weak kernel conditions given in [7].     

BOUNDEDNESS OF MAXIMAL SINGULAR INTEGRALS

The authors study the singular integrals under the Hormander condition and the measure not satisfying the doubling condition. At first, if the corresponding singular integral is bounded from L2 to itself, it is proved that the maximal singular integral is bounded from L∞to RBMO except that it is infinite μ-a.e. on Rd. A sufficient condition and a necessary condition such that the maximal singular integral is bounded from L2 to itself are also obtained. There is a small gap between the two conditions.     

On the stability of Riemannian manifold with parallel spinors

Inspired by the recent work [HHM03], we prove two stability results for compact Riemannian manifolds with nonzero parallel spinors. Our first result says that Ricci flat metrics which also admit nonzero parallel spinors are stable (in the direction of changes in conformal structures) as the critical points of the total scalar curvature functional. Our second result, which is a local version of the first one, shows that any metric of positive scalar curvature cannot lie too close to a metric with nonzero parallel spinor. We also prove a rigidity result for special holonomy metrics. In the case of SU(m) holonomy, the rigidity result implies that scalar flat deformations of Calabi-Yau metric must be Calabi-Yau. Finally we explore the connection with a positive mass theorem of [D03], which presents another approach to proving these stability and rigidity results. Dedicated to Jeff Cheeger for his sixtieth birthday     

Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.