Nuclear analogs of β-lactam antibiotics. 7. The synthesis of 3-thia- and 3-aza-1-dethiaceph-1-em esters

The total synthesis of a 3-thia- and a 3-aza-1-dethiacepham ($\text{9}$ and $\text{16}$) are described. Neither compound possessed antibacterial activity $\text{vs}$$\text{B}$. $\text{subtilis}$. An unsaturated analog, a 3-aza-1-dethiaceph-1-em exhibited weak antibacterial activity.     

Determination of ammonia based on the electro-oxidation of hydroquinone in dimethylformamide or in the room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

The results detail a novel methodology for the electrochemical determination of ammonia based on its interaction with hydroquinone in DMF. It has been shown that ammonia reversibly removes protons from the hydroquinone molecules, thus facilitating the oxidative process with the emergence of a new wave at less positive potentials. The analytical utility of the proposed methodology has been examined with a linear range from 10 to 95 ppm and corresponding limit-of-detection of 4.2 ppm achievable. Finally, the response of hydroquinone in the presence of ammonia has been examined in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluormethylsulfonyl)imide, [EMIM][N(Tf)₂]. Analogous voltammetric waveshapes to that observed in DMF were obtained, thereby confirming the viability of the method in either DMF or [EMIM][N(Tf)₂] as solvent.     

Characterization of aerogel prepared high-surface-area alumina: in situ FTIR study of dehydroxylation and pyridine adsorption

Mesoporous high-surface-area alumina was prepared by a modified aerogel procedure. Specific surface areas between 530-685 m(2)g(-1) were obtained after heat treatment at 500 degrees C. Nitrogen adsorption studies have shown that surface areas and pore characteristics change upon decomposition of aluminum hydroxide to oxide as well as upon compaction of oxide powders. The surface area of aluminum hydroxide increased to a maximum, while the pore volume and diameter decreased as the hydroxide was heated to a temperature of 400 degrees C. Heating at higher temperatures resulted in sintering of the particles accompanied by a decline in the surface area. Compaction of activated alumina into pellets was accompanied by a relatively gradual change in the surface area and pore characteristics at pressures below 6.9 x 10(7) Pa, while severe changes took place at a pressure of 1.4 x 10(8) Pa. In situ IR studies of the dehydroxylation of the alumina surface, showed nu(OH) absorptions for isolated surface hydroxy groups centering at 3670, 3714, and 3765 cm(-1), which are shifted to lower frequencies than common literature values. Pyridine was found to adsorb on Al(3+) ions as well as through hydrogen bonding to relatively acidic surface OH groups, and IR spectra indicated the presence of strong Lewis acid sites.     

The benzoylation of uracil and thymine

Uracil and thymine react with benzoyl chloride in acetonitrile-pyridine solution at room temperature to give first their 1-$\text{N}$-benzoyl (2b and 3b) and then their 1-$\text{N}$, 3-$\text{N}$-dibenzoyl derivatives (4a and 4b, respectively); the latter compounds are converted into the corresponding 3-$\text{N}$-benzoyl derivatives (5a and 6a) under mild conditions of basic hydrolysis.     

Enhanced glucose production from cellulose using coimmobilized cellulase and β-glucosidase

β-Glucosidase was covalently immobilized alone and coimmobilized with cellulase using a hydrophilic polyurethane foam (Hypol®FHP 2002). Immobilization improved the functional properties of the enzymes. When immobilized alone, the K_m for cellobiose of β-glucosidase was decreased by 33% and the pH optimum shifted to a slightly more basic value, compared to the free enzyme. Immobilized β-glucosidase was extremely stable (95% of activity remained after 1000 h of continuous use). Coimmobilization of cellulase and β-glucosidase produced a cellulose-hydrolyzing complex with a 2.5-fold greater rate of glucose production for soluble cellulose and a four-fold greater increase for insoluble cellulose, compared to immobilized cellulase alone. The immobilized enzymes showed a broader acceptance of various types of insoluble cellulose substrates than did the free enzymes and showed a long-term (at least 24 h) linear rate of glucose production from microcrystalline cellulose. The pH optimum for the coimmobilized enzymes was 6.0. This method for enzyme immobilization is fast, irreversible, and does not require harsh conditions. The enhanced glucose yields obtained indicate that this method may prove useful for commercial cellulose hydrolysis.     

Application of Kirkwood-Buff theory to electrolyte solutions. III. Activity coefficients of aqueous NaCl between 273.15 and 573.15 K

Using a theory recently developed for the interpretation of activity coefficients of 1:1 electrolytes up to high concentrations in aqueous solution at 25°C, we have analysed available data for aqueous sodium chloride solutions up to saturation in the temperature range 273.15–573.15 K. The approach, which is based on Kirkwood-Buff theory and uses the truncated Poisson-Boltzmann equation to obtain the required information about the various ion-ion radial distributions, is able to fit the results to high accuracy with minimum of parameters, viz, three, of which one is the distance of closest approach, the other two relate to ion-solvent interactions and/or higher order terms in the ion-ion interaction.     

Multifunctional behavior by a Bis-(phosphinimino)methanide ligand: eta 2- vs eta 3-coordination vs Bronsted basicity

The reaction of [(Cymene)RuCl2]2 with the chelate LiHC(PPh2NPh)2 occurs to remove both chloride ligands, to furnish a cationic Ru(II) complex with the monoanionic ligand bound eta3, through two N and an sp3 carbon. This cation is also produced from the conjugate acid of the ligand H2C(PPh2NPh)2 because this molecule can serve as a Br?nsted base, to deprotonate the acidic carbon of another molecule of H2C(PPh2NPh)2. DFT calculations show an energy surface where (Cymene)RuHC(PPh2NPh)2L is more stable with a Ru-CH(PPh2NPh)2 bond and with L = Cl- or MeCN not coordinated to Ru, than to an eta2-HC(PPh2NPh)2 structure with coordinated L; this is tested experimentally. The greater tendency for this ligand to be coordinated eta3 vs analogous diketiminates is discussed. The nucleophilicity of Cgamma in structure 1, vs that of donors L = Cl- or MeCN, is evaluated to understand the preference of the bis(phosphinimino)methanide to be bidentate or tridentate.     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

A Concise, Enantioselective Synthesis of (-)- and (+)-Hongconin

Optically pure enone 9c, available in three steps from known 6-deoxy D-galactal derivative 7b, reacts with cyanophthalide 6 to directly afford the natural product (-)-hongconin (1), a compound from traditional Chinese medicine recently shown to exhibit antianginal activity. The enantiomer of 1 and its (+)-cis-diastereomer were also synthesized in a parallel fashion from the L-sugar counterpart. The use of C-glycoside Michael acceptors, as opposed to their O-glycoside counterparts, represents a potentially useful simplification of phthalide annulation methodology in synthesizing numerous other such optically pure isochromanquinoids, since it obviates the inconvenience of additional steps late in the synthetic scheme associated with reductive manipulation of a remaining acetal moiety into the desired pyran ring substituent.     

Improved preparative electrochromatography column design

Improved chromatography column fittings were developed for the efficient and reliable application of an electric field to a preparative chromatography column (a process termed electrochromatography). The improved fittings contained electrodes in close proximity to the column packing media and allowed uniform electric fields to be applied. Membranes in the fittings prevented mixing of the electrode and the column eluent buffers. The membranes prevented gases and electrolytic products generated in the electrode chamber from entering the column eluent buffer. An electrode buffer solution was pumped through the electrode chamber to a large external container. The circulation of buffer through the electrode chamber removed the gases and electrolytic products and ensured a uniform electric field by helping to maintain a constant buffer composition. The membranes prevented macromolecules being separated on the column from coming in contact with the electrodes.