Resveratrol derivatives potently induce apoptosis in human promyelocytic leukemia cells

Resveratrol has been shown to possess antioxidant and anticancer activities, but little is known on the effect of resveratrol derivatives. Recently we have isolated resveratrol and its dimers and trimers from peony (Paeonia lactiflora) seeds, and reported their strong antioxidant and cytotoxic activity. In the present study, we have evaluated cellular effects of resveratrol derivatives; viniferin, gnetin H, and suffruticosol B on the proliferation and apoptosis in HL-60 cells in vitro. All resveratrol and its derivatives reduced viability of HL-60 cells in a dose-dependent manner with their IC(50) values of 20-90 microM. Ascending orders of IC(50) values were suffruticosol B, gnetin H, viniferin and resveratrol respectively. HL-60 cells treated with the four stilbenes exhibited the distinct morphological changes characteristics of cell apoptosis such as chromatin condensation, apoptotic bodies, and DNA fragmentations. A time-dependent histogram of the cellular DNA analyzed by flow cytometry revealed a rapid increase in subdiploid cells and a concomitant decrease in diploid cells exposed to 100 microM resveratrol for 0-24 h. Cells treated with 25 microM of resveratrol, viniferin, gnetin H, and suffruticosol B for 24 h resulted in increment of sub-G1 population by 51, 5, 11 and 59%, respectively. Treatment of cells with 0-20 microM resveratrol for 5 h produced a concentration-dependent decrease in cytochrome P450 (CYP) 1B1 mRNA levels. Suffruticosol B also suppressed CYP1B1 gene expression. These results demonstrated that resveratrol oligomers also strongly suppressed HL-60 cell proliferation, and induced DNA damage. In addition, CYP1B1 gene supression may suggest an involvement in the resveratrol-induced apoptosis in HL-60 cells.     

Isolation of the novel dirhodium(II/II) thiolate compound Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2)

The reaction of the anticancer active compound [Rh(2)(mu-O(2)CCH(3))(2)(bpy)(2)(CH(3)CN)(2)][BF(4)](2) (1) (bpy = 2,2'-bipyridine) with NaC(6)H(5)S under anaerobic conditions yields Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2).CH(3)OH (2), which was characterized by UV-visible, IR, and (1)H NMR spectroscopies as well as single-crystal X-ray crystallography. Compound 2 crystallizes as dark red platelets in the monoclinic space group C2/c with cell parameters a = 20.398(4) A, b = 11.861(2) A, c = 17.417(4) A, beta = 108.98 degrees, V = 3984.9(14) A(3), Z = 4. The main structural features are the presence of a [Rh(2)](4+) core with a Rh-Rh distance of 2.549(2) A bridged by two benzene thiolate ligands in a butterfly-type arrangement. The axial positions of the [Rh(2)](4+) core are occupied by two terminal benzene thiolates. Cyclic voltammetric studies of 2 reveal that the compound exhibits an irreversible oxidation at +0.046 V in CH(3)CN, which is in accord with the fact that the compound readily oxidizes in the presence of O(2). The fact that this unusual dirhodium(II/II) thiolate compound is formed under these conditions is an important first step in understanding the metabolism of dirhodium anticancer active compounds with thiol-containing peptides and proteins.     

Theoretical insights into the mechanism of acetylcholinesterase-catalyzed acylation of acetylcholine

Acylation of acetylcholine (ACh) catalyzed by acetylcholinesterase (AChE) has been studied using high-level theoretical calculations on a model system that mimics the reaction center of the enzyme, and compared with uncatalyzed acylation reaction. The geometries of all the intermediates and transition states, activation energies, and solvent effects have been calculated. The calculations predict simultaneous formation of two short-strong hydrogen bonds (SSHB) in the rate-determining transition state structures [the first SSHB involves the hydrogen atom of Ser-200 (H(s)) and another involves the hydrogen atom of His-440 (H(h))]. In the intermediate states, the H-bond corresponding to H(h) involves SSHB, whereas the one corresponding to H(s) does not.     

Novel titanium complexes of a multidentate dicarbollide ligand. Synthesis and structural characterization of a constrained geometry complex

The multidentate dicarbollide ligand nido-7,8-(NMe2CH2)2-7,8-C2B9H11 has been prepared, structurally characterized, and employed in the preparation of the novel mono- and trimetallic titanium complexes [eta5:eta1-(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)2 and [eta5:eta1-[(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)]2-mu3-O-Ti(NMe2)2.     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Enhancing the enantioselectivity of lipase in transesterification by substrate matching: an enzyme memory based approach

The substrate matching strategy is described as a new approach for effectively enhancing the lipase enantioselectivity in organic solvent. In the lipase-catalyzed transesterifications of 3a-c, higher enantioselectivities have been achieved using 1a-c, respectively, as the structurally matched acyl donors.     

Kinetic simulation of living carbocationic polymerizations. II. Simulation of living isobutylene polymerization using a mechanistic model

This paper discusses the kinetic simulation of TiCl₄--coinitiated living carbocationic isobutylene (IB) polymerizations governed by dormant-active equilibria, using a mechanistic model. Two kinetic models were constructed from the same underlying mechanism: one using a commercial simulation software package (Predici^®), and the other using the method of moments. Parameter estimation from experimental batch reactor data with Predici yielded a rate constant of propagation k_p = 4.64 × 10⁸ ± 2.75 × 10⁸ L/mol s, with no constraints imposed. This agrees with k_p data measured with diffusion clock and competition methods, but disagrees with kinetically obtained k_p values. Estimation of rate constants with Predici^® and the GREG parameter estimation software packages revealed that it was difficult to estimate the complete set of kinetic parameters, due to correlated effects of the parameters on model predictions. Estimability analysis confirmed that some of the strongly correlating parameters could not be estimated simultaneously using the available experimental data. Using k_p = 6 × 10⁸ ± 2.75  × 10⁸ L/mol s measured by Mayr, and using starting estimates of other rate constants defined by experimentally observed correlations, yielded the set of rate constants required for the simulations. Both kinetic models yielded good agreement with experimental data, with the exception of M_w values that slightly diverged from the theoretically predicted ‘M_w−M_n = constant’ relationship. This may indicate the occurrence of a minor side reaction. However, the k_p/k₋₁ = 17.5 L/mol average run length calculated from measured and simulated MWD data agrees well with earlier literature values.     

Total syntheses of epothilones B and d

A convergent, total synthesis of epothilones B (2) and D (4) is described. The key steps are Normant coupling to establish the desired (Z)-stereochemistry at C12-C13, Wadsworth-Emmons olefination of methyl ketone 28 with the phosphonate ester 8, diastereoselective aldol condensation of aldehyde 5 with the enolate of keto acid derivatives to form the C6-C7 bond, selective deprotection of acid 52, and macrolactonization.     

Surface Modification of Colloidal Silica by Sulfonation Route for Super-Hydrophilicity

Colloidal silica was chemically modified by a two-step method including an olefin sulfonation route as a preliminary study for super-hydrophilic applications. The hydrophobic vinyl groups were initially bonded chemically to the hydroxylated silica surface using the trichlorosilane coupling agents. The vinyl-terminated silica was then sulfonated by addition reaction with chlorosulfonic acid. The modified silica was investigated using DRIFT, TGA, element analysis, solid-state ²⁹Si- and ¹³C CP-MAS NMR. The vinyl-terminated specimen showed a characteristic IR absorption band at 1600 cm^–1 and a weight loss of approximately 3% starting at 350°C while the ²⁹Si NMR peaks at 70.9 and 79.8 ppm and ¹³C NMR at 136 ppm and 129.8 ppm were assigned to a vinyl group bonded to silica. Elemental analysis of the sulfonated silica indicated the presence of sulfur, carbon and hydrogen. Thermal decomposition in range 150–600°C was due to the presence of sulfonated organics and unreacted vinyl groups while the new signals on ¹³C NMR, which were in the range 70–15 ppm, were assigned to sulfonated carbons.     

Investigation of the Curing Mechanism in the GPTS/APTS Binder System

The acid catalyzed sol-gel reaction in the mixed binder system, 3-glycidoxypropyltrimethoxysilane (GPTS)/3-aminopropyltriethoxysilane (APTS) was investigated and one step and two step synthesis process were compared. Hydrolysis product was observed using the ¹H, ¹³C NMR and Raman spectra. Especially, based on the Raman spectra, epoxy ring opening was observed, varying the ratio of GPTS to APTS. The two step process made clear sol, while the one step process resulted in a milky suspension. According to the Raman spectra, the epoxy ring opening reaction kinetics proceeded slower in the two step process than one step process. Throughout the two step process, it was possible to apply the binder for the coating of substrate.