Binuclear wirelike dimers based on ruthenium(II)-bipyridine units linked by ethynylene-oligothiophene-ethynylene bridges

The syntheses, structural characteristics, electrochemical behavior, ground-state spectra, photophysical properties, and transient absorption (TA) spectra in CH(3)CN solvent are reported for binuclear [(bpy)(2)Ru(bpy-E(T)(n)()E-bpy)Ru(bpy)(2)](4+) complexes, Ru(bpyT(n)bpy)Ru, where the Ru-based units are connected by alternating 3,4-dibutylthiophene (DBT')/thiophene (T') fragments linked via ethynyl groups (E) to bpy ligands at the 5-position (bpy is 2,2'-bipyridine). The ligand bpyT(3)bpy represents a module containing DBT'/T'/DBT' subunits, and bpyT(5)bpy accounts for a DBT'/T'/DBT'/T'/DBT' pattern. The syntheses and electrochemical and spectroscopic (emission and TA) properties in CH(2)Cl(2) solvent of the bpyT(n)()bpy ligands are likewise reported. The behavior of the Ru(bpyT(n)bpy)Ru dimers has been compared to that of the bpyT(n)bpy ligands and to that of a related mononuclear complex, [(bpy)(2)Ru(bpy-E-DBT')](2+), Ru(bpyDBT'). For the dimeric complexes, the electrochemical results show that the first reduction step takes place at the bpy ligand(s) bearing an ethynylene group, the first oxidation step is thiophene-centered, and further oxidation involves the metal centers, which are only weakly interacting. The photophysical and TA results for the Ru(bpyT(n)bpy)Ru dimers account for the presence of low-lying oligothiophene-centered (3)pi,pi levels, while higher-lying metal-ligand charge transfer ((3)MLCT) levels are thermally accessible only for the case of Ru(bpyT(3)bpy)Ru; the possible role of charge separation (CS) levels (from oxidation at the thiophene bridge and reduction at one of the coordinated bpy's) is also discussed.     

Effective interactions in the colloidal suspensions from hypernetted-chain theory

The hypernetted-chain (HNC) Ornstein-Zernike integral equations are used to determine the properties of simple models of colloidal solutions where the colloids and ions are immersed in a solvent considered as a dielectric continuum and have a size ratio equal to 80 and a charge ratio varying between 1 and 4000. At an infinite dilution of colloids, the effective interactions between colloids and ions are determined for ionic concentrations ranging from 0.001 to 0.1 mol/l and compared to those derived from the Poisson-Boltzmann theory. At finite concentrations, we discuss on the basis of the HNC results the possibility of an unambiguous definition of the effective interactions between the colloidal molecules.     

Staphylococcus aureus bicomponent gamma-hemolysins, HlgA, HlgB, and HlgC, can form mixed pores containing all components

Staphylococcal gamma-hemolysins are bicomponent toxins forming a protein family with leucocidins and alpha-toxin. Two active toxins (AB and CB) can be formed combining one of the class-S components, HlgA or HlgC, with the class-F component HlgB. These two gamma-hemolysins form pores with marked similarities to alpha-toxin in terms of conductance, nonlinearity of the current-voltage curve, and channel stability in the open state. AB and CB pores, however, are cation-selective, whereas alpha-toxin is anion-selective. gamma-Hemolysins' pores are hetero-oligomers formed by three or four copies of each component (indicated as 3A3B and 3C3B or 4A4B and 4C4B). Point mutants located on a beta-strand of the class-S component that forms part of the protomer-protomer contact region can prevent oligomer assembly. Interestingly, these mutants inhibit growth of pores formed not only by their natural components but also by nonstandard components. This lead to the hypothesis that mixed ABC pores could also be formed. By studying the conductance of pores, assembled in the presence of all three components (in different ratios), it was observed that the magnitudes expected for mixed pores were, indeed, present. We conclude that the gamma-hemolysin/leucocidin bicomponent toxin family may form a larger than expected number of active toxins by cross-combining various S and F components.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.     

Electroanalytical Study of the Composition of the Raw Pigment Mixtures that Yield the Metallic Lustre on Ceramics. A Link Between Composition and Final Result

Voltammetry of immobilized microparticles was used to study the electrochemistry of the raw pigments that produce the metallic lustre on ceramics after a successful firing. To study this influence of the mixture components on the reduction properties to achieve the metallic lustre, 14 mixtures of illitic clay, Fe₂O₃, HgS, CuO and AgNO₃ were prepared and studied in different media. Iron oxide improves the yield of the reduction of the metals and cinnabar helps a closer reduction of silver to copper reduction and prevents the Ag? Cu alloying because of the formation of silver–mercury adducts. The presence of one of the metals influences the peak position of the other metal. The use of vinegar as diluting agent is not casual, because in this media the reduction of silver takes place at a potential closer to the copper. This electroanalytical technique allowed to distinguish between powders of different composition and offered some information about the role of the components in the reduction of copper and silver and the selection of vinegar to prepare the raw pigment suspensions.     

Stereoselective syntheses of 1,4-dideoxy-1,4-imino-octitols and novel tetrahydroxyindolizidines

A new route for the preparation of four new indolizidines, (1R,2S,6S,7S,8aS)- and (1R,2S,6R,7R,8aS)-1,2,6,7-tetrahydroxyindolizidine (30 and 32) and (1S,2R,7S,8S,8aR)- and (1S,2R,7R,8R,8aR)-1,2,7,8-tetrahydroxyindolizidine (44 and 46), is reported. The synthesis is based on Knoevenagel homologation of the readily available enantiomerically pure pyrrolidin-carbaldehydes 13 and 37followed by asymmetric dihydroxylation of the subsequent alkenyl pyrrolidines and cyclization of the corresponding imino-octitols. The new indolizidines and their precursors (imino-octitols 20, 25, 26) and indolizidinones 28a and 28b have been tested for inhibitory activities toward 26 glycosidases. The enzymatic inhibition of trans-7-hydroxy-d-(-)-swainsonine (44) toward alpha-mannosidases is similar to that described for trans-7-hydroxy-l-(+)-swainsonine (11b) toward naringinase (alpha-l-rhamnosidase from Penicillium decumbens).     

Comparison of single extraction procedures,using either conventional shaking or microwave heating,and the Tessier sequential extraction method for the fractionation of heavy metals from environmental samples

The conventional four-step sequential extraction method and the EDTA and acetic acid single extraction procedures were applied to sewage sludge and sediment samples. The results obtained with these samples for Cu, Cr, Ni, Pb and Zn using the Tessier method were compared with those supplied by the two single extraction procedures employed. In addition, the Tessier method was also applied to a reference material, CRM 483, and these results were also compared with the certified EDTA and acetic acid values for this sample. As a result, good agreement was found between the metal contents released in the first three fractions of the Tessier method and those leached by the simpler single extraction procedures for the most of the elements studied. Subsequently, the conventional EDTA and acetic acid extraction methods were accelerated by means of microwave energy, in order to reduce the operating time. The extraction efficiency of the first three fractions of the Tessier method was compared with that obtained using the optimised microwave single extraction procedures and only in sewage sludge and CRM 483 samples were satisfactory results found for all the elements studied, except Cr and Pb. This means that the microwave single extraction procedures optimised in this work could be employed as screening methods to evaluate rapidly the easiest mobilizable heavy metals in these samples, although more samples should be analysed to determine their general applicability. The application of the accelerated single extraction procedures to a reference material, CRM 483, provided satisfactory results for all the elements studied, except for Cr in both methods and for Pb in the acetic acid extracts.     

Interligand interactions controlling the mu-N7,N9-metal bonding of adenine (AdeH) to the N-benzyliminodiacetato(2-) copper(II) chelate and promoting the N9 versus N3 tautomeric proton transfer: molecular and crystal structure of [Cu2(NBzIDA)(2)(H2O)(2)(mu-N7,N9-Ade(N3)H)].(3)H2O

The reaction in water of the N-benzyliminodiacetate-copper(II) chelate ([Cu(NBzIDA)]) and the adenine:thymine base pair complex (AdeH:ThyH) with a Cu/NBzIDA/AdeH/ThyH molar ratio of 2:2:1:1 yields [Cu(2)(NBzIDA)(2)(H(2)O)(2)(mu-N7,N9-Ade(N3)H)].3H(2)O and free ThyH. The compound has been studied by thermal, spectral, and X-ray diffraction methods. In the asymmetric dinuclear complex units both Cu(II) atoms exhibit a square pyramidal coordination, where the four closest donors are supplied by NBzIDA in a mer-tridentate conformation and the N7 or N9 donors of AdeH, which is protonated at N3. The mu-N7,N9 bridge represents a new coordination mode for nonsubstituted AdeH, except for some adeninate(1-)-[methylmercury(II)] derivatives studied earlier. The dinuclear complex is stabilized by the Cu-N7 and Cu-N9 bonds and N6-H(exocyclic)...O(carboxyl) and N3-H(heterocyclic)...O(carboxyl) interligand interactions, respectively. The structure of the new compound differs from that of the mononuclear compound [Cu(NBzIDA)(Ade(N9)H)(H(2)O)].H(2)O, in which the unusual Cu-N3(AdeH) bond is stabilized by a N9-H...O(carboxyl) interligand interaction and where alternating benzyl-AdeH intermolecular pi,pi-stacking interactions produce infinite stacked chains. The possibility for ThyH to be involved in the molecular recognition between [Cu(NBzIDA)] and the AdeH:ThyH base pair is proposed.