Chiral Phosphinophenyloxazolines Bearing Alkoxymethyl Substituents: Synthesis and Application in the Palladium Catalyzed Allylic Substitution Reactions

The chiral phosphine‐oxazoline ligands 3 and 4 bearing 4‐alkoxymethyl substituents on the oxazoline ring with (R)‐configuration were prepared from L‐serine methyl ester in 66% and 33% yields, respectively. Along this synthetic pathway, the β‐hydroxylamides derived from L‐serine methyl ester and 2‐halobenzoyl chlorides were expediently converted to the corresponding oxazolines by using diethylaminosulfur trifluoride as the activation agent. Potassium diphenylphosphide was the reagent of choice for replacing the bromine atom on the phenyl ring, giving the desired oxazoline‐phosphine ligands 3 and 4 . Together with [Pd(η³‐allyl)Cl]₂, ligands 3 and 4 induced an enantioselective allylic substitution reaction of 1,3‐diphenyl‐2‐pro‐penyl acetate by dimethyl malonate. Although ligands 3 and 4 exhibit the (R)‐configuration, differing from the (S)‐configuration of Pfaltz‐Helmchen‐Williams phosphine‐oxazoline ligands, all these ligands led to the same enantiotopic preference in the allylic substitution reaction. To facilitate the recovery and reuse of the phosphine‐oxazoline ligand, immobilization on Merrifield resin was attempted, albeit in low loading.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.     

Determination of rotenone residues in raw honey by solid-phase extraction and high-performance liquid chromatography

A method for determining residues of the insecticide rotenone in raw-honey by high-performance liquid chromatography (HPLC) is described. To extract the residues, organic solvents such as ethyl acetate, n-hexane/dichloromethane and solid-phase extraction with octadecylsilane cartridges or Florisil packed columns were tested. Determination was carried out by reversed-phase HPLC using acetonitrile-buffer phosphate (pH 7) (60:40, v/v) as mobile phase and detection at 210 nm. Although the data showed that the two extraction methods were able to isolate the pesticide residues, the extraction on octadecylsilane cartridges was preferred due to its simplicity and higher recovery. Recoveries depended strongly on the fortification level for the two extraction procedures. Practical determination limits of 0.015 mg/kg were obtained. In the analysis of honeys, from beehives treated with rotenone at therapeutical doses for 1 month, residual amounts below 0.2 mg/kg were found.     

Two families of mixed finite elements for second order elliptic problems

Summary Two families of mixed finite elements, one based on triangles and the other on rectangles, are introduced as alternatives to the usual Raviart-Thomas-Nedelec spaces. Error estimates inL ² () andH ^–5 () are derived for these elements. A hybrid version of the mixed method is also considered, and some superconvergence phenomena are discussed.     

Binuclear Cu2+ complex mediated discrimination between L-glutamate and L-aspartate in water

L-glutamate and L-aspartate selectivity is achieved by the action of two Cu2+ metal ions rightly disposed in a cyclophane-type macrocyclic framework; electrochemical sensing of glutamate has been achieved by adsorption of the copper complexes on graphite electrodes.     

Chiral separation of some triazole pesticides by supercritical fluid chromatography

The enantiomeric separation of six triazole pesticides: cyproconazole, propiconazole, diniconazole, hexaconazole, tebuconazole and tetraconazole, using supercritical fluid chromatography and the Chiralpak AD column, is presented in this work. The effect of different organic modifiers such as methanol, ethanol and 2-propanol on the retention and resolution was studied as well as the presence of additives in the mobile phase. The results obtained were highly successful, all the compounds were enantiomerically separated and in most of the cases the analysis time was close to 10 min. The type of organic modifier that provided the best results depended on the compound.     

Cell lysis on a microfluidic CD (compact disc)

Cell lysis was demonstrated on a microfluidic CD (Compact Disc) platform. In this purely mechanical lysis method, spherical particles (beads) in a lysis chamber microfabricated in a CD, cause disruption of mammalian (CHO-K1), bacterial (Escherichia coli), and yeast (Saccharomyces cerevisiae) cells. Interactions between beads and cells are generated in the rimming flow established inside a partially filled annular chamber in the CD rotating around a horizontal axis. To maximize bead-cell interactions in the lysis chamber, the CD was spun forward and backwards around this axis, using high acceleration for 5 to 7 min. Investigation on inter-particle forces (friction and collision) identified the following parameters; bead density, angular velocity, acceleration rate, and solid volume fraction as having the most significant contribution to cell lysis. Cell disruption efficiency was verified either through direct microscopic viewing or measurement of the DNA concentration after cell lysing. Lysis efficiency relative to a conventional lysis protocol was approximately 65%. In the long term, this work is geared towards CD based sample-to-answer nucleic acid analysis which will include cell lysis, DNA purification, DNA amplification, and DNA hybridization detection.     

Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

49.

Thermal characterization of UHMWPE stabilized with natural antioxidants     

M. Peltzer  J. R. Wagner  A. Jiménez 《Journal of Thermal Analysis and Calorimetry》2007,89(2):493-497

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

50.

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents     

Brian K. Nicholson  Jim Simpson 《Journal of organometallic chemistry》1978,155(2):237-244

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

[首页] « 上一页 [1] [2] [3] [4] 5 [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Thermal characterization of UHMWPE stabilized with natural antioxidants

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.