Comparison of compositional and morphological atom-probe tomography analyses for a multicomponent Fe-Cu steel.

A multicomponent Fe-Cu based steel is studied using atom-probe tomography. The precipitates are identified using two different methodologies and subsequent morphological and compositional results are compared. The precipitates are first identified using a maximum separation distance algorithm, the envelope method, and then by a concentration threshold method, an isoconcentration surface. We discuss in detail the proper selection of the parameters needed to delineate precipitates utilizing both methods. The results of the two methods exhibit a difference of 44 identified precipitates, which can be attributed to differences in the basis of both methods and the sensitivity of our results to user-prescribed parameters. The morphology of the precipitates, characterized by four different precipitate radii and precipitate size distribution functions (PSDs), are compared and evaluated. A variation of less than approximately 8% is found between the different radii. Two types of concentration profiles are compared, giving qualitatively similar results. Both profiles show Cu-rich precipitates containing Fe with elevated concentrations of Ni, Al, and Mn near the heterophase interfaces. There are, however, quantitative disagreements due to differences in the basic foundations of the two analysis methods.     

Mechanistic study of osmium(VIII) promoted oxidation of crotonic acid by aqueous alkaline solution of potassium bromate

Kinetics and mechanism of the Os(VIII) catalysed oxidation of crotonic acid (CA) by KBrO₃ in alkaline medium have been investigated. Zero order dependence in [KBrO₃] was observed, while first order with respect to CA in its lower concentration range tends to zero order at its higher concentration range. The order in [Os(VIII)] was found to be unity and a positive effect of [OH⁻] was observed. Variation of the ionic strength (μ) and dielectric constant of the medium and addition of Hg(OAc)₂ (used as Br⁻ scavenger) had an insignificant effect on the rate of reaction. Thermodynamic parameters have also been calculated and reported. A suitable mechanism consistent with the observed kinetic results has been suggested and the related rate law deduced.     

Synthesis of 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] modified nucleosides and oligonucleotides.

A versatile synthetic route has been developed for the synthesis of 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] (abbreviated as 2'-O-DMAOE) modified purine and pyrimidine nucleosides and their corresponding nucleoside phosphoramidites and solid supports. To synthesize 2'-O-DMAOE purine nucleosides, the key intermediate B (Scheme 1) was obtained from the 2'-O-allyl purine nucleosides (13a and 15) via oxidative cleavage of the carbon-carbon bond to the corresponding aldehydes followed by reduction. To synthesize pyrimidine nucleosides, opening the 2,2'-anhydro-5-methyluridine 5 with the borate ester of ethylene glycol gave the key intermediate B. The 2'-O-(2-hydroxyethyl) nucleosides were converted, in excellent yield, by a regioselective Mitsunobu reaction, to the corresponding 2'-O-[2-[(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)oxy]ethyl] nucleosides (18, 19, and 20). These compounds were subsequently deprotected and converted into the 2'-O-[2-[(methyleneamino)oxy]ethyl] derivatives (22, 23, and 24). Reduction and a second reductive amination with formaldehyde yielded the corresponding 2'-O-[2-[(N,N-dimethylamino)oxy]ethyl] nucleosides (25, 26, and 27). These nucleosides were converted to their 3'-O-phosphoramidites and controlled-pore glass solid supports in excellent overall yield. Using these monomers, modified oligonucleotides containing pyrimidine and purine bases were synthesized with phosphodiester, phosphorothioate, and both linkages (phosphorothioate and phosphodiester) present in the same oligonucleotide as a chimera in high yields. The oligonucleotides were characterized by HPLC, capillary gel electrophoresis, and ESMS. The effect of this modification on the affinity of the oligonucleotides for complementary RNA and on nuclease stability was evaluated. The 2'-O-DMAOE modification enhanced the binding affinity of the oligonucleotides for the complementary RNA (and not for DNA). The modified oligonucleotides that possessed the phosphodiester backbone demonstrated excellent resistance to nuclease with t(1/2) > 24 h.     

The intramolecular asymmetric Pauson-Khand cyclization as a novel and general stereoselective route to benzindene prostacyclins: synthesis of UT-15 (treprostinil)

A general and novel solution to the synthesis of biologically important stable analogues of prostacyclin PGI(2), namely benzindene prostacyclins, has been achieved via the stereoselective intramolecular Pauson-Khand cyclization (PKC). This work illustrates for the first time the synthetic utility and reliability of the asymmetric PKC route for synthesis and subsequent manufacture of a complex drug substance on a multikilogram scale. The synthetic route surmounts issues of individual step stereoselectivity and scalability. The key step in the synthesis involves efficient stereoselection effected in the PKC of a benzoenyne under the agency of the benzylic OTBDMS group, which serves as a temporary stereodirecting group that is conveniently removed via benzylic hydrogenolysis concomitantly with the catalytic hydrogenation of the enone PKC product. Thus the benzylic chiral center dictates the subsequent stereochemistry of the stereogenic centers at three carbon atoms (C(3a), C(9a), and C(1)).     

Biocompatible polymers for antibody support on gold surfaces

The elimination or minimization of non-specific protein adsorption from serum is critical for the use of surface plasmon resonance (SPR) sensors for in vitro and in vivo analysis of complex biological solutions. The ultimate goals in this application are to minimize non-specific adsorption of protein and to maximize analyte signal. A reduction of the non-specific protein adsorption from serum of up to 73% compared to carboxymethylated-dextran 500 kDa (CM-dextran) was achieved following a survey of eight biocompatible polymers and 10 molecular weights of CM-dextran. These coatings minimize non-specific adsorption on the sensor while also serving as immobilization matrices for antibody fixation to the probes. Polymers including polysaccharides: CM-dextrans, CM-hyaluronic acid, hyaluronic acid, and alginic acid were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisuldfide–polyethyleneglycol–N-hydroxysuccinimide (OPSS–PEG–NHS), and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA) were also used. The non-specific protein adsorption reduction was measured over a 14 day period at 0 °C for each polymer. Calibration curves using some of these polymers were constructed to show the performance and low detection limit possibilities of these new antibody supports. For many of the polymers, this is the first demonstration of employment as an antibody support for an optical or surface active sensor. CM-dextran is the polymer offering the largest signal for the antigen detection. However, the biocompatible polymers demonstrate a greater stability to non-specific binding in serum. These biocompatible polymers offer different alternatives for CM-dextran.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

A facile one‐pot synthesis of novel substituted 1,2,3,4‐tetrahydropyrimidine,part 2: Synthesis of 1‐(aralkyl/aryl)‐3‐(alkyl/aralkyl/aryl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines

1‐(Aralkyl/aryl)‐3‐(alkyyaralkyl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines ( 2a‐c ) have been synthesized by dethiomethylation of 5‐aroyl‐6‐methylthio‐1,2,3,4‐tetrahydropyrimidines ( 1a‐c ). An alternative one‐pot synthetic strategy has been developed for the title compounds 2a‐t by the reaction of enaminones 3 with pri mary amine and formaldehyde in refluxing methanol in good yields.     

Protonated (protosolvated) onium ions (onlum dications)

In this short review we have shown the importance of protosolvation of onium ions (containing non-bonded pairs of electrons) in superacid catalyzed reactions. Such activation can result in unusual reactions such as aromatic alkylation with Meerwein’s salts, aliphatic nitration with nitronium ion, alkylation of saturated hydrocarbons, greatly enhanced activity of acyl cations, etc. Possibly such phenomena may be operative in hydroxylation reactions using protonated hydrogen peroxide in strong acid solutions. Even the reactivity of halonium ions could be enhanced by protosolvation. Consequently, electrophilic protosolvation may play a significant role in strogg acid catalyzed reactions.     

Toward a new generation of therapeutics

Scientific evidence in the prevention and treatment of various disorders is accumulating regarding probiotics. The health benefits supported by adequate clinical data include increased resistance to infectious disease, decreased duration of diarrhea, management of inflammatory bowel disease, reduction of serum cholesterol, prevention of allergy, modulation of cytokine gene expression, and suppression of carcinogen production. Recent ventures in metabolic engineering and heterologous protein expression have enhanced the enzymatic and immunomodulatory effects of probiotics and, with time, may allow more active intervention among critical care patients. In addition, a number of approaches are currently being explored, including the physical and chemical protection of cells, to increase probiotic viability and its health benefits. Traditional immobilization of probiotics in gel matrices, most notably calcium alginate and κ-carrageenan, has frequently been employed, with noted improvements in viability during freezing and storage. Conflicting reports exist, however, on the protection offered by immobilization from harsh physiologic environments. An alternative approach, microencapsulation in “artificial cells,” builds on immobilization technologies by combining enhanced mechanical stability of the capsule membrane with improved mass transport, increased cell loading, and greater control of parameters. This review summarizes the current clinical status of probiotics, examines the promises and challenges of current immobilization technologies, and presents the concept of artificial cells for effective delivery of therapeutic bacterial cells.